More From Contributor

£339.00
Introducing the 2016 Model of the Jumpking Jump POD Classic 12ft Trampoline! The unique revolutionary design Trampoline & safety enclosure slot together as one unit into Tri-Layer sockets which greatly enhances strength, safety & durability no need for brackets! Easy to set up & take down. Some of the new features on the 2016 model include a frame foam is now made from a new enhanced XPE foam, the enclosure frame now has 5 W-shaped legs & 5 bottom curved galvanized steel poles. The Jump POD Classic safety enclosure entrance is secured with a double locking zip & clip system. This trampoline enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The Jump POD Classis benefits from the unique Eurospring design with its Over & Under configuration which gives better performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position.A spring loading tool is included & no other tools are required, it really is a slot together job. The trampoline should be placed on a flat, soft surface. We advise that no more than one person at any one time uses the trampoline. We also urge that an adult is present at all times to ensure maximum safety. For added safety, we recommend all Trampolines are securely anchored to the ground using our anchor kits ...
Archived Product
£389.95
  The superb Jumpking Jump POD Classic available in an 14ft size with its unique revolutionary design
- Trampoline & safety
...
Archived Product
£419.00
New 2016 Model of the Jumpking Jump POD Classic 14ft Trampoline! The unique revolutionary design Trampoline & safety enclosure slot together as one unit into Tri-Layer sockets which greatly enhances strength, safety & durability no need for brackets! Easy to set up & take down. Some of the new features on the 2016 model include a frame foam is now made from a new enhanced XPE foam, the enclosure frame now has 5 W-shaped legs & 5 bottom curved galvanized steel poles. The Jump POD Classic safety enclosure entrance is secured with a double locking zip & clip system. This trampoline enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The Jump POD Classis benefits from the unique Eurospring design with its Over & Under configuration which gives better performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position.A spring loading tool is included & no other tools are required, it really is a slot together. The trampoline should be placed on a flat, soft surface. We advise that no more than one person at any one time uses the trampoline. We also urge that an adult is present at all times to ensure maximum safety. For added safety, we recommend all Trampolines are securely anchored to the ground using our anchor kits Dimensions Product

Size:
14ft (427cm). Br>
Height: 35in (89cm) Legs: 5 & curved poles Springs: 80 x 7in (Eurospring Style) Frame: 32mm, Tri Layer Socket Steel Thickness: 1.2mm Padding: 20mm Ultra Heavy Duty Vinyl, UV treated Jumping Bed: American made Grade A Permatron (highest quality) Max Single User Weight: 120kg Features Ultra Heavy Duty Vinyl UV treated Jumping Bed Grade A Permatron (highest quality) Tri-layer sockets XPE foam sleeves Euro Spring springs Spring loading tool included Warranty 10 Years on frame.5 years on jumping bed.5 years on springs.1 year on surround padding & enclosure net.1 year against manufacturing defects on all parts.


...
Archived Product
£359.95
The superb Jumpking Jump POD Classic available in an 15ft size with its unique revolutionary design Trampoline & safety enclosure ...
Archived Product
£239.95
The superb Jumpking Jump POD Classic available in an 8ft size with its unique revolutionary design Trampoline & safety enclosure ...
Archived Product
£19.95
This is a genuine Jumpking replacement part & should not be compared with other inferior unbranded parts available. Bungee cords are used to fasten the Jump POD net to the enclosure poles. This is a genuine Jump POD replacement bungee for Jump PODs sold between 20062009. This style Jump POD had shockcords running round the centre & top of the netting & had enclosure poles with gold end caps. This will fit both the Jump POD Classic & Jump POD Deluxe sold between 20062009. If you are unsure which Jump POD style you have, please contact us & we will be happy to help. Price is for a pack of 8 bungee cords ...
Archived Product
£289.95
Brand New to the UK. The Octagonal Jump POD or Octa POD from Jumpking. The design allows the jumper more control over their movements & unlike a round trampoline does not pull the jumpers into the middle. This has proven to reduce accidents. The Octa POD is designed to be safer than the traditional round Jump POD whilst still retaining the classic styling of the original. The octagonal shape of the Jumpking Octa POD gives a more controlled bounce greatly reducing the chance of bouncing forward off balance. The shape of the jumping mat & frame allows more vertical travel producing a softer, better & more controlled bounce. Perfect for all ages! This 10ft Octa POD Classic still has the revolutionary design of its younger sister the Jump POD Trampoline & safety enclosure slot together as one unit into Tri Layer sockets which greatly enchances strength, safety & durability. No need for brackets! Easy to set up & take down. The Tri Layer Socket produces a much stronger connection at the point where the vertical leg assembly meets the upper frame work. Constructed from 3 layers of steel (5mm total) the major stress point is reinforced in a way that no other trampoline is. This unique feature provides a stronger, longer lasting frame. The square tsection joint construction also prevents the frame from twisting providing a completeley stable jumping arena. The Octa POD enclosure entrance is secured with a double locking zip & clip system. This enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The bottom of the enclosure net is integrated with the trampoline by lacing through the Vrings on the jumping mat preventing any jumper from slipping between springs or under the padding, giving maximum security & safety. The enclosure poles slot directly into the Tri Layer socket on the legs through the spring padding, eliminating the need for conventional brackets on the legs. The enclosure design has the patented G3 enclosure system, with slot in G3 shock corded rods at the top of the enclosure with angled poles which maintains the Octa POD classic octagonal shape, eliminates sagging in the net & gives additional structural stability. This new enclosure style ensures more tension in the netting & is easier to assemble than ever before. Bouncing action now pulls the G3 rod into the support poles increasing the tension of the net. This means that there are no bungees to fly off & fewer replacement parts required. The Octa POD benefits from the unique shape & spring configuration giving far greater performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position. The jumping bed is a Grade A, heavy duty, Permatron polypropylene mesh mat, made in the USA. This is the highest quality mat available. All steel frame parts are galvanised on the inside & outside to give maximum protection & life. The Octa POD is easy to assemble, complete with full instructions. A spring loading tool is included & no other tools are required, it really is a slot together product As this trampoline is not round it will naturally have two sizes depending where you measure: pointtopoint & flattoflat. ...
Archived Product
£289.95
Brand New to the UK. The Octagonal Jump POD or Octa POD from Jumpking. The design allows the jumper more control over their movements & unlike a round trampoline does not pull the jumpers into the middle. This has proven to reduce accidents. The Octa POD is designed to be safer than the traditional round Jump POD whilst still retaining the classic styling of the original. The octagonal shape of the Jumpking Octa POD gives a more controlled bounce greatly reducing the chance of bouncing forward off balance. The shape of the jumping mat & frame allows more vertical travel producing a softer, better & more controlled bounce. Perfect for all ages! This 10ft Octa POD Classic still has the revolutionary design of its younger sister the Jump POD Trampoline & safety enclosure slot together as one unit into Tri Layer sockets which greatly enchances strength, safety & durability. No need for brackets! Easy to set up & take down. The Tri Layer Socket produces a much stronger connection at the point where the vertical leg assembly meets the upper frame work. Constructed from 3 layers of steel (5mm total) the major stress point is reinforced in a way that no other trampoline is. This unique feature provides a stronger, longer lasting frame. The square tsection joint construction also prevents the frame from twisting providing a completeley stable jumping arena. The Octa POD enclosure entrance is secured with a double locking zip & clip system. This enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The bottom of the enclosure net is integrated with the trampoline by lacing through the Vrings on the jumping mat preventing any jumper from slipping between springs or under the padding, giving maximum security & safety. The enclosure poles slot directly into the Tri Layer socket on the legs through the spring padding, eliminating the need for conventional brackets on the legs. The enclosure design has the patented G3 enclosure system, with slot in G3 shock corded rods at the top of the enclosure with angled poles which maintains the Octa POD classic octagonal shape, eliminates sagging in the net & gives additional structural stability. This new enclosure style ensures more tension in the netting & is easier to assemble than ever before. Bouncing action now pulls the G3 rod into the support poles increasing the tension of the net. This means that there are no bungees to fly off & fewer replacement parts required. The Octa POD benefits from the unique shape & spring configuration giving far greater performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position. The jumping bed is a Grade A, heavy duty, Permatron polypropylene mesh mat, made in the USA. This is the highest quality mat available. All steel frame parts are galvanised on the inside & outside to give maximum protection & life. The Octa POD is easy to assemble, complete with full instructions. A spring loading tool is included & no other tools are required, it really is a slot together product As this trampoline is not round it will naturally have two sizes depending where you measure: pointtopoint & flattoflat.  ...
Archived Product
£329.95
Brand New to the UK. The Octagonal Jump POD or Octa POD from Jumpking. The design allows the jumper more control over their movements & unlike a round trampoline does not pull the jumpers into the middle. This has proven to reduce accidents. The Octa POD is designed to be safer than the traditional round Jump POD whilst still retaining the classic styling of the original. The octagonal shape of the Jumpking Octa POD gives a more controlled bounce greatly reducing the chance of bouncing forward off balance. The shape of the jumping mat & frame allows more vertical travel producing a softer, better & more controlled bounce. Perfect for all ages! This 12ft Octa POD Classic still has the revolutionary design of its younger sister the Jump POD Trampoline & safety enclosure slot together as one unit into Tri Layer sockets which greatly enchances strength, safety & durability. No need for brackets! Easy to set up & take down. The Tri Layer Socket produces a much stronger connection at the point where the vertical leg assembly meets the upper frame work. Constructed from 3 layers of steel (5mm total) the major stress point is reinforced in a way that no other trampoline is. This unique feature provides a stronger, longer lasting frame. The square tsection joint construction also prevents the frame from twisting providing a completeley stable jumping arena. The Octa POD enclosure entrance is secured with a double locking zip & clip system. This enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The bottom of the enclosure net is integrated with the trampoline by lacing through the Vrings on the jumping mat preventing any jumper from slipping between springs or under the padding, giving maximum security & safety. The enclosure poles slot directly into the Tri Layer socket on the legs through the spring padding, eliminating the need for conventional brackets on the legs. The enclosure design has the patented G3 enclosure system, with slot in G3 shock corded rods at the top of the enclosure with angled poles which maintains the Octa POD classic octagonal shape, eliminates sagging in the net & gives additional structural stability. This new enclosure style ensures more tension in the netting & is easier to assemble than ever before. Bouncing action now pulls the G3 rod into the support poles increasing the tension of the net. This means that there are no bungees to fly off & fewer replacement parts required. The Octa POD benefits from the unique shape & spring configuration giving far greater performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position. The jumping bed is a Grade A, heavy duty, Permatron polypropylene mesh mat, made in the USA. This is the highest quality mat available. All steel frame parts are galvanised on the inside & outside to give maximum protection & life. The Octa POD is easy to assemble, complete with full instructions. A spring loading tool is included & no other tools are required, it really is a slot together product ...
Archived Product
£329.95
Brand New to the UK. The Octagonal Jump POD or Octa POD from Jumpking. The design allows the jumper more control over their movements & unlike a round trampoline does not pull the jumpers into the middle. This has proven to reduce accidents. The Octa POD is designed to be safer than the traditional round Jump POD whilst still retaining the classic styling of the original. The octagonal shape of the Jumpking Octa POD gives a more controlled bounce greatly reducing the chance of bouncing forward off balance. The shape of the jumping mat & frame allows more vertical travel producing a softer, better & more controlled bounce. Perfect for all ages! This 12ft Octa POD Classic still has the revolutionary design of its younger sister the Jump POD Trampoline & safety enclosure slot together as one unit into Tri Layer sockets which greatly enchances strength, safety & durability. No need for brackets! Easy to set up & take down. The Tri Layer Socket produces a much stronger connection at the point where the vertical leg assembly meets the upper frame work. Constructed from 3 layers of steel (5mm total) the major stress point is reinforced in a way that no other trampoline is. This unique feature provides a stronger, longer lasting frame. The square tsection joint construction also prevents the frame from twisting providing a completeley stable jumping arena. The Octa POD enclosure entrance is secured with a double locking zip & clip system. This enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The bottom of the enclosure net is integrated with the trampoline by lacing through the Vrings on the jumping mat preventing any jumper from slipping between springs or under the padding, giving maximum security & safety. The enclosure poles slot directly into the Tri Layer socket on the legs through the spring padding, eliminating the need for conventional brackets on the legs. The enclosure design has the patented G3 enclosure system, with slot in G3 shock corded rods at the top of the enclosure with angled poles which maintains the Octa POD classic octagonal shape, eliminates sagging in the net & gives additional structural stability. This new enclosure style ensures more tension in the netting & is easier to assemble than ever before. Bouncing action now pulls the G3 rod into the support poles increasing the tension of the net. This means that there are no bungees to fly off & fewer replacement parts required. The Octa POD benefits from the unique shape & spring configuration giving far greater performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position. The jumping bed is a Grade A, heavy duty, Permatron polypropylene mesh mat, made in the USA. This is the highest quality mat available. All steel frame parts are galvanised on the inside & outside to give maximum protection & life. The Octa POD is easy to assemble, complete with full instructions. A spring loading tool is included & no other tools are required, it really is a slot together product ...
Archived Product

Jumpking JumpPOD Classic 8ft Trampoline Package

The superb Jumpking JumpPOD Classic available in an 8ft size with its unique revolutionary design Trampoline and safety enclosure slot together as one unit into TriLayer sockets which greatly enchances strength, safety and durability no need for brackets! Easy to set up and take down.This 8ft JumpPOD Classic trampoline package really does come with everything you need for maximum trampoline enjoyment including a weather cover which, unlike other trampolines, can be used while the safety net enclosure is installed. Great for keeping off leaves, bird droppings, tree sap, and other debris.Also included is a Trampoline access ladder which is perfect to assist novice trampolinists or children every little helps! And and shoe bag which is great for shoes and anything else you may be
carrying such as a mobile phone!The Tri Layer Socket produces a much stronger connection at the point where the vertical leg assembly meets the upper frame work. Constructed from 3 layers of steel (5mm total) the major stress point is reinforced in a way that no other trampoline is. This unique feature provides a stronger, longer lasting frame. The square tsection joint construction also prevents the frame from twisting providing a completeley stable jumping arena.The JumpPOD Classic safety enclosure entrance is secured with a double locking zip and clip system. This trampoline enclosure is especially safe as it keeps jumpers away from the enclosure poles and from landing on or under the padding covering the springs, ensuring little feet and hands are kept safe.The bottom of the
enclosure net is integrated with the trampoline by lacing through the Vrings preventing jumpers from slipping between springs or under the padding, giving maximum security and safety.The enclosure poles slot directly into the TriLayer socket on the legs through the spring padding, eliminating the need for conventional brackets on the legs.The JumpPOD enclosure design has the patented G3 enclosure system, with slot in G3 shock corded rods at the top of the enclosure with angled poles maintains the classic JumpPOD circular shape, eliminates sagging in the net and gives additional structural stability.This new enclosure style ensures more tension in the netting and is easier to assemble than ever before. Bouncing action now pulls the G3 rod into the support poles increasing the tension of
the net. This means that there are no bungees to fly off and fewer replacement parts required.The JumpPOD Classis benefits from the unique Eurospring design with its Over and Under configuration which gives better performance, reduces stress on the frame and produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised.Spring Pads are 20mm thick and made of closed cell foam with laminated vinyl to exclude water and prevent rot.The padding is securely tied to the frame to ensure they are always in the correct position.The jumping bed is a Grade A, heavy duty, Permatron polypropylene mesh mat, made in the USA. This is the highest quality mat available.All steel frame parts are galvanised on the inside and outside to give maximum protection and
life.The JumpPOD is easy to assemble, complete with full instructions.A spring loading tool is included and no other tools are required, it really is a slot together product
RIP - This product is no longer available on our network. It was last seen on 08.10.2017

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£249.95

Product Description

The superb Jumpking Jump POD Classic available in an 8ft size with its unique revolutionary design Trampoline & safety enclosure slot together as one unit into Tri Layer sockets which greatly enchances strength, safety & durability no need for brackets! Easy to set up & take down. This 8ft Jump POD Classic trampoline package really does come with everything you need for maximum trampoline enjoyment including a weather cover which, unlike other trampolines, can be used while the safety net enclosure is installed. Great for keeping off leaves, bird droppings, tree sap, & other debris. Also included is a Trampoline access ladder which is perfect to assist novice trampolinists or children every little helps! & and shoe bag which is great for shoes & anything else you may be carrying such as a mobile phone! The Tri Layer Socket produces a much stronger connection at the point where the vertical leg assembly meets the upper frame work. Constructed from 3 layers of steel (5mm total) the major stress point is reinforced in a way that no other trampoline is. This unique feature provides a stronger, longer lasting frame. The square tsection joint construction also prevents the frame from twisting providing a completeley stable jumping arena. The Jump POD Classic safety enclosure entrance is secured with a double locking zip & clip system. This trampoline enclosure is especially safe as it keeps jumpers away from the enclosure poles & from landing on or under the padding covering the springs, ensuring little feet & hands are kept safe. The bottom of the enclosure net is integrated with the trampoline by lacing through the Vrings preventing jumpers from slipping between springs or under the padding, giving maximum security & safety. The enclosure poles slot directly into the Tri Layer socket on the legs through the spring padding, eliminating the need for conventional brackets on the legs. The Jump POD enclosure design has the patented G3 enclosure system, with slot in G3 shock corded rods at the top of the enclosure with angled poles maintains the classic Jump POD circular shape, eliminates sagging in the net & gives additional structural stability. This new enclosure style ensures more tension in the netting & is easier to assemble than ever before. Bouncing action now pulls the G3 rod into the support poles increasing the tension of the net. This means that there are no bungees to fly off & fewer replacement parts required. The Jump POD Classis benefits from the unique Eurospring design with its Over & Under configuration which gives better performance, reduces stress on the frame & produces an even bounce. The springs also benefit from a much longer life span. All springs are galvanised. Spring Pads are 20mm thick & made from closed cell foam with laminated vinyl to exclude water & prevent rot. The padding is securely tied to the frame to ensure they are always in the correct position. The jumping bed is a Grade A, heavy duty, Permatron polypropylene mesh mat, made in the USA. This is the highest quality mat available. All steel frame parts are galvanised on the inside & outside to give maximum protection & life. The Jump POD is easy to assemble, complete with full instructions.A spring loading tool is included & no other tools are required, it really is a slot together product

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

ZIP - A device (Usualy Metal) used for temporarily attaching two pieces of fabric together
Polypropylene - A thermoplastic polymer - a rugged and highly resistant plastic
Steel - An alloy made predominately of Iron combined with <2% carbon
Foam - A stubstance formed by trapping air in a solid or liquid
Vinyl - A type of material which falls under the board term of pastic
Shoes - An item of footwear made from Leather or other synthetic materials
Tension - A force that is stretching an object
Tension - Also known as stress, a situation where a human can not cope with emotional or physical threats
Stress - Also known as tension, a situation where a human can not cope with emotional or physical threats
water - A chemical substance. Chemical formula H2O.
phone - Short for telephone. A device that transmits sound allowing point to point communication over long distances
Leg - A body part attached to the buttock
heavy - A concept of weight indicating an item may require some effort to lift or move
Quality - An object that has quality is superior in function and finish than a less quality object.
Set - a group of items usually related to one another. Some objects cannot function without the complete set of items.
Size - is the measurement of how big an object is in space.
Weather - is the change of an atmospheres conditions.
Safety - prevents damage being caused.
Zip - A Fastening which can open and close to get inside.
Reinforced - Relating to structure, making it more sturdy.
Patented - Something that has legal rights not to be copied, unique.
Instructions - An informative direction to take.
Layer - Adding extra quantities of materials for extra practical benefits, e.g. warmth.
Assembly - A gathering of people for a purpose e.g. a school assembly
Design - A drawing or styles that shows the look and functionality of something before its made.
Classic - Something that is still like it was originally a high quality standard.
Laminated - A thin layer of plastic that gives a coating and shine to a material.
Feature - An attribute that makes something stand out.
Children - A young life form within the early stages of physical development,
Mesh - A material mad up of crossed over fibres such as metal or thread.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Assembly - A gathering of people all together for the same purpose.

Supplier Information

All Round Fun
Page Updated: 2021-01-03 13:52:44

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu