An ULTRA sharp hook is one of the biggest edges in modern specimen angling. It takes practice to sharpen hooks to perfection, but the biggest hurdle angler’s face is inadequate tools for the job. This is why JAG Products have developed the SP (surgical point) Stones in 2 different grades. Used in conjunction with JAG’s Ultra Eye, hook points can be sharpened to a level far superior to ANY hook straight from the pack. Fed up of throwing hooks & rigs away because they are blunt? NO MORE, simply re-sharpen the hook & the rig is better than new & you have saved a fortune on expensive rig materials ££££££. Medium grade. Ideal abrasive for general sharpening. Fine grade. Perfect abrasive for smaller hooks or final honing Code: FC-JAG-STN-PACK ...

Introducing the new SP Max File to the range, in testing sharpening time has been reduced by up to 75% due to the increased metal removal. Use the SP Max File to sharpen the three sides of the hook point before a final hone with the SP Stones. The SP Max File has been developed with Jason Hayward & has been purposely designed for precision hook sharpening with a specific “cut” grade, compact size & special safety edges to avoid damaging the SP Vice. The SP Max File has been manufactured to Jag’s exact

Specification by a world leading Swiss jewellery file manufacturer, enough said! Code: FC-JAG-FILE

...

The SP Vice has been purpose designed to aid precision hook sharpening. It allows for very secure clamping of any hook pattern & size. The SP Vice is totally unique because it has been designed with a large top surface to act as a guide/steady which enables perfectly honed faces of the hook point. It also allows the hook to be clamped very low which greatly reduces “push off” when filing/honing hook points. The SP Vice has been precision machined by JAG in Engl&, the entire head assembly is manufactured from high grade stainless steel for ultimate durability, the handle is machined from light weight aluminium which has been designed to house a set of SP Stones to keep them safe & at hand whilst saving space. In field testing the vice has allowed anglers to achieve incredibly sharp hooks that had previously struggled to master the technique. Code: FC-JAG-VICE ...

Bursting with innovation. Supplied as a pair! Complete compact adjustable system, additional banksticks are not required. NO screw driver required, place supplied driver bit in end of inner section of rear Stage Bite & use to fix supplied screw. Stage Bite! machined teeth on the base bite into wood for amazing rigidity & zero twist. Once fixed down the Stage Bites are going nowhere. Replace internal section with any Jag Bankstick for extra height & total flexibility if required. The thumb Screw that cannot be lost, Jag’s totally unique no-loss system. CNC machined from solid high grade Stainless Steel delivering a super strong construction. Rear Stage Bite with magnetic DRIVER system. (Torque head driver supplied. Titanium coated.) Front Stage Bite shorter to accommodate alarm height. Supplied with four Teflon coated SPAX screws with torque driver head (2 spares). These screws really are awesome, no slippage of driver, no rounding of screw head & virtually no downward pressure needed when fixing screw. Code: FC-JAG-STAGE ...

The most aggressive hard ground bankstick available. The outer section of the Xcavator has been CNC machined from a single piece of stainless steel to deliver an almost indestructible construction. The real magic is in the fine taper, high pitch auger. Two large machined cutting teeth & 43 machined mini cutting teeth plough, cut & smash their way through the very hardest ground. The Xcavator Standard is a fully adjustable bankstick with double knurled head, Jag’s unique no-loss thumb screw & comes complete with a solid stainless two handed tommy bar. Outer diameter of the Xcavators is 17mm (the same as our Stage Bites). Any JAG bankstick can be inserted for full flexibility. Simply Ground Breaking! Code: FC-JAG-XCAV ...

The Xcavator Universal is basically the same outer section as the standard version but with a slightly larger bore to allow any bankstick to be dropped inside & securely clamped (1/2”
- 12.7mm or under). It is the perfect addition to carbon banksticks that get badly scored or just simply won’t go through hard ground. Because it is only an outer section it is also very cost effective. Comes complete with a solid stainless two handed tommy bar. Code: FC-JAG-UNIXCA
...

The Jarvis Walker Codfather is a sensational carbon composite rod that offers the best of both worlds. Great value & performance ...