More From Contributor

£10.98
This high-quality adapter cable means that you can connect a computer with a DVI-I analogue output to a VGA monitor with a built-in VGA cable (i.e. 15 Way VGA Male) Many modern graphics cards feature both DVI-I (digital & analogue) & VGA (analogue) connectors. This cable is useful when you want to connect two VGA monitors to a computer equipped with one of these cards
- simply connect the first monitor to the VGA port & the second, using this cable, to the DVI port!
...
Archived Product
£12.48
This high-quality adapter cable means that you can connect a computer with a VGA output to a monitor or projector with a DVI-I analogue input. To use, simply plug it into the VGA port on your computer & then use a Male to Male DVI-I cable to connect it to your display. Many modern graphics cards feature both DVI-I (digital & analogue) & VGA (analogue) connectors. This adapter cable is useful when you want to connect the two analogue signals from a computer equipped with one of these cards to two DVI-I displays. ...
Archived Product
£4.98
SATA 1.0a & SATA II compatible Features latch type, low profile SATA plugs which lock into place when used with compatible latching controller or device ports Can also be used with standard non-latching SATA ports 10 year warranty ...
Archived Product
£2.24
Note: Cables with IEC C13 sockets such as this are sometimes known by the generic term 'kettle lead'. Even though this term is commonly used, technically it is incorrect as a kettle requires special IEC C15/16 connectors rated at 120 degrees. So, although they look similar, a 'real' kettle lead features a connector with a cut out on the top. Standard IEC C13 cables cannot be plugged into kettles! ...
Archived Product
£3.48
Serial ATA 7 Pin Male to Serial ATA 7 Pin Male
Colour: Red ...
Archived Product
£3.98
SATA 7 Pin Male to 20mm right-angled (90) SATA 7 Pin Male Length: 20cm
Colour: Red Note: This cable features a short
...
Archived Product
£4.48
SATA 1.0a & SATA II compatible Features latch type SATA plugs which lock into place when used with compatible latching controller or device ports Can also be used with standard non-latching SATA ports ...
Archived Product
£1.98
Can be used with either USB (Universal Serial Bus) 1.1 or USB (Universal Serial Bus) 2.0 devices Complies fully with the USB (Universal Serial Bus) 2.0

Specification allowing data transfer speeds of up to 480 Mbit/sec Ideal for use as a replacement USB (Universal Serial Bus) lead for your printer, scanner etc. USB Type A Male to USB (Universal Serial Bus) Type B Male Fully moulded Length: 0.2m 10 year warranty This high quality USB (Universal Serial Bus) cable complies fully with the USB (Universal Serial Bus) 2.0

Specification allowing data transfer speeds of up to 480 Mbit/sec.



...
Archived Product
£1.98
Can be used with either USB (Universal Serial Bus) 1.1 or USB (Universal Serial Bus) 2.0 devices Ideal for use as a replacement USB (Universal Serial Bus) lead for your printer, scanner etc. USB Type A Male to USB (Universal Serial Bus) Type B Male Fully moulded Length: 0.2m 10 year warranty ...
Archived Product
£1.98
Can be used with either USB (Universal Serial Bus) 1.1 or USB (Universal Serial Bus) 2.0 devices Complies fully with the USB (Universal Serial Bus) 2.0

Specification allowing data transfer speeds of up to 480 Mbit/sec Stylish transparent cable Ideal for use as a replacement USB (Universal Serial Bus) lead for your printer, scanner etc. USB Type A Male to USB (Universal Serial Bus) Type B Male Fully moulded Length: 0.2m 10 year warranty

...
Archived Product

0.2m SATA Cable - Latching, Right-Angled (90) Connector

SATA 1.0a and SATA II compatible Straight to right angle latch type SATA plugs which lock into place when used with compatible latching controller or device ports Can also be used with standard non-latching SATA ports 10 Year warranty
RIP - This product is no longer available on our network. It was last seen on 13.02.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£4.78

Product Description

SATA 1.0a & SATA II compatible Straight to right angle latch type SATA plugs which lock into place when used with compatible latching controller or device ports Can also be used with standard non-latching SATA ports 10 Year warranty

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

SATA - Serial Advanced Technology Attachment - a connection type for additional drives
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Cable - A series of wires bonded to form a single thread
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.

Supplier Information

Page Updated: 2023-02-01 10:31:11

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu