For use with SAS/SATA HBAs (Host Board Adapters) & external drive housings
Latch type SFF-8088 (4x) to latch type SFF-8088 (4x) connectors
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3 Gb each direction/channel
Colour: Black
10 Year warranty ...
For use with SAS/SATA HBAs (Host Board Adapters) & external drive housings
Thumbscrew type SFF-8470 (4x) to latch type SFF-8088 (4x) connectors
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3 Gb each direction/channel
Colour: Black
10 Year warranty ...
For use with SAS/SATA HBAs (Host Board Adapters) & external drive housings
Thumbscrew type SFF-8470 (4x) to latch type SFF-8470 (4x) connectors
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3 Gb each direction/channel
Colour: Black
10 Year warranty ...
For use with SAS/SATA HBAs (Host Board Adapters) & external drive housings
Latch type SFF-8470 (4x) to latch type SFF-8470 (4x) connectors
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3 Gb each direction/channel
Colour: Black
10 Year warranty ...
For use with SAS/SATA HBAs (Host Board Adapters) & external drive housings
Thumbscrew type SFF-8470 (4x) connectors on both ends
SAS (Serial Attached SCSI) compliant
Fully compliant with SATA II specifications (Electrical Specifications, section 6.6)
Full duplex communication up to 3 Gb each direction/channel
Warranty: 10 years ...
SATA 1.0a & SATA II compatible
Straight to right angle latch type SATA plugs which lock into place when used with compatible latching controller or device ports
Can also be used with standard non-latching SATA ports
10 Year warranty ...
SATA 1.0a & SATA II compatible
Features latch type SATA plugs which lock into place when used with compatible latching controller or device ports
Can also be used with standard non-latching SATA ports ...
Internal data & power extension cable
Connectors: Combined 7 Pin SATA Male Data + 6 Pin Slimline SATA Male Power to 7 SATA Female Data + 6 Pin Slimline SATA Female Power
10 Year warranty ...
Can be used with either USB (Universal Serial Bus) 1.1 or USB (Universal Serial Bus) 2.0 devices
USB Type A Male to USB (Universal Serial Bus) Type A Male
Fully moulded
Length: 0.5m
10 year warranty
This high quality USB (Universal Serial Bus) cable complies fully with the USB (Universal Serial Bus) 2.0
Specification allowing data transfer speeds of up to 480 Mbit/sec. ...
Archived Product
0.5m SATA Cable
Serial ATA 7 Pin Male to Serial ATA 7 Pin Male
Colour: Red
RIP - This product is no longer available on our network. It was last seen on 13.02.2012
This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.
Use our search facility to see if it is available from an alternative contributor.