Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

LINDY Super Long Distance DVI cables use a specially developed & optimised cable material that allows longer cable distances than the 7.5m maximum recommendation laid down by the DDWG (Digital Display Working Group). Please note: Maximum supported distances & resolutions are dependent on both the monitor & the chipset used in the graphics card. Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

This really high quality, long length cable is an ideal replacement or upgrade for the typical 'low cost' aerial cables used in most TV installations. It features two robust, gold plated coax connectors with stylish 'gun-metal' hoods for a very secure & reliable installation. The cable itself is manufactured using a 75 Ohm double screened OFC coaxial copper conductor for optimal signal transfer & reduced interference. ...

This really high quality extension cable is an ideal replacement or upgrade for the typical 'low cost' aerial cables used in most TV installations. It features two robust, gold plated coax connectors with stylish 'gun-metal' hoods for a very secure & reliable installation. The cable itself is manufactured using a 75 Ohm double screened OFC coaxial copper conductor for optimal signal transfer & reduced interference. ...

15 Way HD Male to 15 Way HD Male 3.5mm jack to 3.5mm jack Audio break-out cable length: 50cm Ferrite core at each end to reduce interference for the best picture quality Available in lengths up to 15m Fully moulded DDC (Display Data Channel) compatible
Colour: Black 10 year warranty
...

15 Way HD Male to 15 Way HD Female Ferrite core at each end to reduce interference for the best picture quality Fully moulded DDC (Display Data Channel) compatible
Colour: Black 10 year warranty
...

6 Pin Mini DIN Male to 6 Pin Min DIN Male Fully moulded 10 year warranty ...

6 Pin Mini DIN Male to 6 Pin Mini DIN Female Fully moulded 10 year warranty ...

High quality ADSL/ Broadband/ Modem Cable RJ-11 4P4C to RJ-45 8P4C Straight through wiring
Colour: Black PVC Clear plastic
...

Mini 4 Pin Male to Mini 4 Pin Male Highly flexible PVC sheath Moulded connectors with Gold Plated contacts 10 year warranty ...