About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

S-Video Female to Female Coupler
S-Video Female To
Female Coupler
£1.98
Can be used as a coupler or gender changer 4 Pin Female to 4 Pin Female Nickel plated connectors
Colour: Black 2 year
...
Archived Product
SAS / SATA II HDD Backplane Module
SAS / SATA II HDD
Backplane Module
£34.98
Supports 3.5 " SAS / SATA II/1.0a drives of any capacity Fits into a standard 5.25" expansion bay Hard drive mounts directly into the back plane module without the need for a separate caddy Innovative hot-plug design allows extremely quick drive swaps, minimizing down time Special ' No-Scratch' connector protects the hard drive contacts & is tested to exceed over 10, 000 insertions/ejections Sturdy, metal frame with shock absorbing silicon rubber mounts to reduce noise & vibration Lockable drive eject handle with automatic drive release system ...
Archived Product
image missing
SAS / SATA Multilane
/ Infiniband Quad
Drive Enclosure (8TB
Support)
£99.98
The LINDY Multilane Quad Drive features the latest high speed SAS interface (SFF-8470) which enables you to transfer data at up to 12 Gigabits per second (4 x 3 Gigabits) & can hold up 8 Terabytes of storage (4 x 2TB) using SATA Hard Drives (not supplied) making it the perfect storage addition to any computer or server. The LINDY Multilane Quad Drive can be connected to using standard SAS or SATA Multilane cables to any compatible computer, if your computer does not feature a compatible port you can simply add a SATA Multilane PCI card to add this functionality. When connected to a SATA or SAS controller with RAID functionality the LINDY Multilane Quad Drive will provide compatibility with all of the RAID levels supported by the controller. ...
Archived Product
SAS/SATA Back Plane System for 4 x 2.5" Hard Drives
SAS/SATA Back Plane
System For 4 X 2.5"
Hard Drives
£74.98
The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system & is ideal for servers & workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs & requires less cooling
- so is quieter to run.
...
Archived Product
image missing
SAS/SATA Back Plane
System For 6 X 2.5"
Hard Drives
£79.98
The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to six 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system & is ideal for servers & workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs & requires less cooling
- so is quieter to run.
...
Archived Product
SAS/SATA Multilane Host Adapter Board for SATA Controllers
SAS/SATA Multilane
Host Adapter Board For
SATA Controllers
£27.98
Converts 4 internal SATA ports to 1 external multilane connector Supports transfer speeds of up to 6 Gbps Supplied with standard & low profile mounting brackets External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 Year warranty ...
Archived Product
SATA 3.5"HDD Backplane Module
SATA 3.5"HDD Backplane
Module
£24.98
Supports 3.5" SATA drives of any capacity SATA 1.5/3/6 Gbps compatible Fits into a standard 5.25" expansion bay Hard drive mounts directly into the back plane module without the need for a separate caddy Innovative hot-plug design allows extremely quick drive swaps, minimizing down time Special ' No-Scratch' connector protects the hard drive contacts & is tested to exceed over 10, 000 insertions/ejections Sturdy, metal frame with shock absorbing silicon rubber mounts to reduce noise & vibration Lockable drive eject handle with automatic drive release system ...
Archived Product
SATA 90 Degree Down Male to Female, L-Adapter
SATA 90 Degree Down
Male To Female,
L-Adapter
£4.98
Gives you better access to SATA ports Connectors: Latched 90 SATA 7 pin male, SATA 7 pin female Can be used with standard non-latching ports Use to redirect ports & connecting cables for a neater installation Provides a degree of stain relief on ports Dimensions: 16 x 34 x 7mm (Wx Dx H) Projects 8mm from ports when connected Ideal for situations where space or access is limited such as inside small form factor computers.
Colour: Black 10 Year Warranty
...
Archived Product
SATA Converter for IDE Drives
SATA Converter For IDE
Drives
£15.78
Plugs directly into an IDE drive 40 Way IDC Female (drive) to Serial ATA Male (controller) Serial ATA & Power Adaptor Cable included SATA & power adapter cable included Supports Serial ATA Generation 1 transfer rate of 1.5 G Byte/s Fully compliant with Serial ATA 1.0 specification 2 Year warranty ...
Archived Product
SATA Converter for IDE Hard Drives
SATA Converter For IDE
Hard Drives
£11.08
Plugs directly into an IDE hard drive (not suitable for use with CD/DVD drives) 40 Way IDC Female (drive) to Serial ATA Male (controller) 4 Pin power connector (3.5") Supports SATA speeds of up to 1.5 Gbps Fully compliant with SATA 1.0 specification Compatible with Ultra ATA 33/66/100/133 Plug & Play installation, no software required Chipset: JMicron JM20330 2 Year warranty HDD jumper must be set to Master ...
Archived Product

SAS/SATA Multilane Adapter Board For SATA Storage

Allows 4 SATA drives to be connected to 1 external multilane connector Supports transfer speeds of up to 6Gbps Metal bracket with mounting holes, SCSI-I (50 Way Centronics) form factor External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 year warranty This multilane adapter board can be used with an external drive enclosure to allow up to four SATA hard disks to be connected. A single multilane cable links the board to your host system. Mounted on a metal bracket, the SCSI-I (50 Way Centronics) form factor makes it ideal for upgrading older drive enclosures to use new high speed SAS/SATA drives.
RIP - This product is no longer available on our network. It was last seen on 13.02.2012

This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.

Use our search facility to see if it is available from an alternative contributor.
Availability: In Stock
£34.98
adapters | power cables Accessories > Plugs & Cables > Power Cables
Description Reviews / Comments Add New

Product Description

Allows 4 SATA drives to be connected to 1 external multilane connector Supports transfer speeds of up to 6 Gbps Metal bracket with mounting holes, SCSI-I (50 Way Centronics) form factor External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 year warranty This multilane adapter board can be used with an external drive enclosure to allow up to four SATA hard disks to be connected. A single multilane cable links the board to your host system. Mounted on a metal bracket, the SCSI-I (50 Way Centronics) form factor makes it absolutely ideal for upgrading older drive enclosures to use new high speed SAS/SATA drives.

Reviews/Comments

Add New

Intelligent Comparison

Oooops!
We couldn't find anything!
Perhaps this product's unique.... Or perhaps we are still looking for comparisons!
Click to bump this page and we'll hurry up.

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

SATA - Serial Advanced Technology Attachment - a connection type for additional drives
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Cable - A series of wires bonded to form a single thread
speed - A measurement of how fast an object travels between two points
Year - The time it takes the planet earth to orbit the sun. This takes around 365.25 days.
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Year - 365 days (366 days in a leap year), the time taken for planet earth to make one full revolution around the sun.
Ideal - Something that satisfies a perfect criteria.

Supplier Information

LINDY Electronics
Page Updated: 2023-02-01 10:31:11

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu