Ideal for medium to large equipment & accessories that are not designed for rackmounting Ventilated design ensuring continued airflow through the enclosure For use with 19 Rackmount enclosures
Colour: Black 2 year warranty Note:due to the unique design of our direct mount shelves, this item will only fit the LINDY range of floor standing network & server cabinets.
...

The LINDY Display Port to Mini Display Port Adapter is designed for use with Display Port video cards. Simply connect the adapter to the Display Port connection of the source device & the Mini Display Port end of the connector on your Mini DP display. ...

Allows Display Port signals to be transmitted at distances of up to 30m Supports resolutions of up to 2560 x 1600 Supports DP++/ Display Port Dual Mode HDCP signal support Dimensions: 53 x 55 x 20mm (Wx Dx H) 2 year warranty When used in conjunction withour Display Port Cables, this extender module allows Display Port video signals to be sent over distances of up to 30m. It supports connections of up to 15m to the display & up to 15m from the source at a resolution of up to 2560 x 1600 (1600p). ...

The LINDY Display Port to DVI Adapter is designed for use with newer PCs & Laptops. Connect the adapter to the Display Port of the source device & the DVI end of the adapter to an external monitor or projector. ...

The LINDY Display Port to HDMI Adapter means that you can connect newer PCs & Laptops with Display Port connections to HDMI equipped monitors or displays. Simply connect the adapter to the Display Port of the source device & the HDMI end of the adapter to an external HDMI monitor or projector. Information regarding audio support: Audio output over HDMI is only supported when the graphics card of the notebook or desktop computer supports audio output over Display Port. Several on-board graphics adapters such as Mobile Intel 4 Series Express Chipset in Notebooks (i.e. Dell E6400) do NOT support audio output over Display Port, even when HDMI support (Intel High Definition Audio HDMI Service) is installed for audio controllers. In such instances a separate audio connection has to be set up. ...

Enables a computer, which supports dual video output via its DMS output port, to be connected to two separate VGA monitors Connectors: DMS 59 Single Link Male to 2 x 15 Way VGA Female Length: 160mm 10 year warranty Note: Before purchasing this cable, please ensure that your video card can output via a DMS 59 port. You may need to check your system documentation or contact your computer manufacturer for clarification. ...

Brush Plates are perfect for hiding cables behind walls & giving an installation a clean appearance. Rather than bundles of cables hanging down or trailing around the floor Brush Plates allow only the necessary amount of cable length to show. ideal to be used during AV installations they reduce the need for additional interface connections that you would find on traditional face plates. Two plates are usually installed, one for entrance & the other for the exit of cables & usually at the top & bottom of the wall where the equipment resides. ...

This single gang face plate is designed to be used with the LINDY Modular AV Extender Wall Plate System or AV Face Plate System which are designed to extend a combination of audio & video signals over low cost Cat 5e/6 cable. Choose from a range of snap in modules, including VGA, RCA/ Phono & S-Video combinations. Up to 4 modules can be installed in this face plate. If installing less than 4 modules, blanking plates can be used for a tidier installation. Also available are a range of accessories including face plates, back boxes & bulk cable for a total extender solution. ...

This double gang face plate is designed for use with the LINDY Modular AV Extender Wall Plate System or AV Face Plate System which are designed to extend a combination of audio & video signals over low cost Cat 5e/6 cable. Choose from a range of snap in modules, including VGA, RCA/ Phono & S-Video combinations. Also available are a range of accessories including face plates, back boxes & bulk cable for a total extender solution. ...

This sturdy bracket kit means that you can mount two LCD or plasma TV's securely to a ceiling. The kit consists of two heavy gauge steel poles & all required fittings for mounting to timber or masonry. The design allows the TV's to be tilted downwards up to 25and rotated up to 30to give you great flexibility when positioning your displays. Package Contents Double Display Bracket Ceiling fixing bolts Display fixing bolts Instruction leaflet ...