The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system & is ideal for servers & workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs & requires less cooling
- so is quieter to run.
...

The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to six 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system & is ideal for servers & workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs & requires less cooling
- so is quieter to run.
...

Allows 4 SATA drives to be connected to 1 external multilane connector Supports transfer speeds of up to 6 Gbps Metal bracket with mounting holes, SCSI-I (50 Way Centronics) form factor External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 year warranty This multilane adapter board can be used with an external drive enclosure to allow up to four SATA hard disks to be connected. A single multilane cable links the board to your host system. Mounted on a metal bracket, the SCSI-I (50 Way Centronics) form factor makes it absolutely ideal for upgrading older drive enclosures to use new high speed SAS/SATA drives. ...

Converts 4 internal SATA ports to 1 external multilane connector Supports transfer speeds of up to 6 Gbps Supplied with standard & low profile mounting brackets External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 Year warranty ...

Supports 3.5" SATA drives of any capacity SATA 1.5/3/6 Gbps compatible Fits into a standard 5.25" expansion bay Hard drive mounts directly into the back plane module without the need for a separate caddy Innovative hot-plug design allows extremely quick drive swaps, minimizing down time Special ' No-Scratch' connector protects the hard drive contacts & is tested to exceed over 10, 000 insertions/ejections Sturdy, metal frame with shock absorbing silicon rubber mounts to reduce noise & vibration Lockable drive eject handle with automatic drive release system ...

Plugs directly into an IDE drive 40 Way IDC Female (drive) to Serial ATA Male (controller) Serial ATA & Power Adaptor Cable included SATA & power adapter cable included Supports Serial ATA Generation 1 transfer rate of 1.5 G Byte/s Fully compliant with Serial ATA 1.0 specification 2 Year warranty ...

Plugs directly into an IDE hard drive (not suitable for use with CD/DVD drives) 40 Way IDC Female (drive) to Serial ATA Male (controller) 4 Pin power connector (3.5") Supports SATA speeds of up to 1.5 Gbps Fully compliant with SATA 1.0 specification Compatible with Ultra ATA 33/66/100/133 Plug & Play installation, no software required Chipset: JMicron JM20330 2 Year warranty HDD jumper must be set to Master ...

Change the gender of SATA connections Connectors: SATA 7 pin female, SATA 7 pin female Can be used as a gender changer or port extender Ideal for situations where space or access is limited such as inside small form factor computers Provides a degree of strain relief on ports Dimensions: 16 x 37 x 7mm (Wx Dx H)
Colour: Black 10 Year Warranty
...

The LINDY Modular AV Face Plate System means that you can create your own custom face plates by using a combination of Snap-in Blocks & Keystone modules. Install this SC Duplex Multimode face plate along side other Keystone & Snap-in modules. These modules provide a full range of solutions for AV, networking, voice & audio installations. The wide selection of modules & face plates can be custom configured giving you greater control & flexibility. Additional required products... Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Face Plates. Single Gang Face Plateor Double Gang Face Plate are also available. ...

This Fast Ethernet Fibre Optic Converter means that you can convert & extend the distance of your Fast Ethernet network by up to 2km over fibre optic cable. The fibre optic signal is totally immune to electromagnetic & radio frequency interference, & electrically isolated
- ideal for high speed inter-connections up to 200 Mbps (Full-duplex) between buildings & floors. Package Contents SC Media Converter Multi Country PSU 5V 2.5 Amp User Manual
...