This superb Display Port cable benefits from advanced design & construction to provide the best possible performance & reliability. ...

Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

This stylish cable has been specially designed to complement your modern home cinemaor streaming media installation. Its flat design allows it to be easily routed underneath carpets, along walls & behind equipment whilst the advanced, high quality cable construction & gold plated connectors ensure maximum reliability as well as perfect image & sound reproduction. ...

Note: Cables with IEC C13 sockets such as this are sometimes known by the generic term 'kettle lead'. Even though this term is commonly used, technically it is incorrect as a kettle requires special IEC C15/16 connectors rated at 120 degrees. So, although they look similar, a 'real' kettle lead features a connector with a cut out on the top. Standard IEC C13 cables cannot be plugged into kettles! ...

3.5mm Stereo Jack Male to 2 x Phono Male Moulded, Gold Plated Connectors Cable

Colour: Black 10 year warranty

...

3.5mm Stereo Jack Male to 3.5mm Stereo Jack Male Moulded, Gold Plated Connectors Cable

Colour: Black 10

...

3.5mm Stereo Jack Male to 3.5mm Stereo Jack Female Moulded, Gold Plated Connectors Cable

Colour: Black 10

...

Gold Plated connectors to prevent oxidisation for maximum reliability IEEE 1394b compliant Fully moulded 4 pin connector also known as i. Link or DV connector
Colour: Transparent Length: 7.5m 10 year warranty
...

Gold Plated connectors to prevent oxidisation for maximum reliability IEEE 1394b compliant Fully moulded
Colour: Transparent
...