These snap in blanking plates are designed to be used with the LINDY Modular AV Extender Wall Plate System which employs Balun technology to extend a combination of audio & video signals over low cost Cat 5e/6 cable. Choose from a range of snap in modules, including VGA, RCA/ Phono & S-Video modules including face plates, back boxes & bulk cable for a total extender solution. The blank plates may be customised by fitting your own adapter or connector. ...

The LINDY Modular AV Face Plate System means that you can create your own custom face plates by using a combination of Snap-in Blocks & Keystone modules. Use this VGA Snap-in Block to install a LINDY Premium Gold VGA cable or VGA Mini Gender Changer into a face plate along side other Keystone & Snap-in modules. These modules provide a full range of solutions for AV, networking, voice & audio installations. The wide selection of modules & face plates can be custom configured giving you greater control & flexibility. Additional required products... Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Face Plates. Single Gang Face Plateor Double Gang Face Plate are also available. Assembling a LINDY VGA Face Plate This guide shows you how to assemble a LINDY VGA Face Plate using our Premium Gold VGA cables & Holding Posts & Nuts. Parts you will need: This LINDY VGA Snap-in Blank Block A Single Gang or Double Gang Snap-in Face Plate A LINDY Premium Gold VGA cable according to your requirements Pack of Holding Posts & Nuts, Part No. 66025 (50 Pack) or Part No. 66026 (10 Pack) A Snap in Blanking Plate (optional) ...

This very useful device can convert either digital optical Tos Link or coaxial SPDIF signals to an analogue stereo 3.5mm output port. Both optical & coaxial cables can be connected at the same time & a simple switch determines which signal is active. This headphone version features amplification, with volume control, & allows higher sampling rates, up to 192 K Hz, for clearer audio output. ...

This very useful device can convert either digital optical Tos Link or coaxial SPDIF signals to analogue stereo left & right phono output ports. Both optical & coaxial cables can be connected at the same time & a simple switch determines which signal is active. This professional version allows higher sampling rates, up to 192 K Hz, for clearer audio output. Please note: This converter supports uncompressed digital audio stereo input signals such as PCM audio. It does not support compressed audio formats such as Dolby Digital, DTS, 5.1, etc. If you want to use it on your TV or digital home theatre set the digital audio output format on your device to PCM or any other uncompressed audio format. ...

Compact device for converting digital coax or optical to analogue stereo audio Input ports: 1 x Tos Link (Optical Fibre), 1 x Digital Coaxial (Phono) Input format: SPDIF, LPCM 2 Ch Output ports: 2 x Analogue Phono Ports (Left & Right) Supports uncompressed digital stereo audio input only (see below for more info) 2 year warranty This very useful device can convert either digital optical Tos Link or coaxial SPDIF signals to analogue stereo left & right phono output ports. Both optical & coaxial cables can be connected at the same time & a simple switch determines which signal is active. ...

The LINDY Modular AV Face Plate System means that you can create your own custom face plates by using a combination of Snap-in Blocks & Keystone modules. Fit this Speaker Terminal Keystone into a Keystone Snap-in Block & place into a face plate along side other Keystone & Snap-in modules. These modules provide a full range of solutions for AV, networking, voice & audio installations. The wide selection of modules & face plates can be custom configured giving you greater control & flexibility. Additional required products... Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Keystone Snap-in Blocks or Face Plates. Place this Keystone into either a Single Keystone Snap-in Blocks or Dual Keystone Snap-in Blocks which come in packs of four. Then use with a Single Gang Face Plateor Double Gang Face Plate. ...

For use with 90 degree keystone jacks Non impact operation Terminates & cuts eight conductors in a single operation Adjustable insertion, cutting depth via built in adjuster 2 Year warranty ...

Accidents caused by tripping & falling can cause severe personal injury as well as costly damage to sensitive electrical equipment. The danger of tripping over loose cables & the cost of liability claims, injury, compensation & absence of personnel can easily be avoided by using this simple but highly effective cable tidy. Additional information Halogen Free Operating Temperature: -50C to +85C Enables Cables to be led out at any point Follows any route taken by the cable Tensile Strength @ Break: 12 MPa Ultimate Elongation: 550% Dielectric Strength: 30 k V/mm ...

Accidents caused by tripping & falling can cause severe personal injury as well as costly damage to sensitive electrical equipment. The danger of tripping over loose cables & the cost of liability claims, injury, compensation & absence of personnel can easily be avoided by using this simple but highly effective cable tidy. Additional information Halogen Free Operating Temperature: -50C to +85C Enables Cables to be led out at any point Follows any route taken by the cable Tensile Strength @ Break: 12 MPa Ultimate Elongation: 550% Dielectric Strength: 30 k V/mm ...

Accidents caused by tripping & falling can cause severe personal injury as well as costly damage to sensitive electrical equipment. The danger of tripping over loose cables & the cost of liability claims, injury, compensation & absence of personnel can easily be avoided by using this simple but highly effective cable tidy. Additional information Halogen Free Operating Temperature: -50C to +85C Enables Cables to be led out at any point Follows any route taken by the cable Tensile Strength @ Break: 12 MPa Ultimate Elongation: 550% Dielectric Strength: 30 k V/mm ...