The LINDY Multilane Quad Drive features the latest high speed SAS interface (SFF-8470) which enables you to transfer data at up to 12 Gigabits per second (4 x 3 Gigabits) & can hold up 8 Terabytes of storage (4 x 2TB) using SATA Hard Drives (not supplied) making it the perfect storage addition to any computer or server. The LINDY Multilane Quad Drive can be connected to using standard SAS or SATA Multilane cables to any compatible computer, if your computer does not feature a compatible port you can simply add a SATA Multilane PCI card to add this functionality. When connected to a SATA or SAS controller with RAID functionality the LINDY Multilane Quad Drive will provide compatibility with all of the RAID levels supported by the controller. ...

The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system & is ideal for servers & workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs & requires less cooling
- so is quieter to run.
...

The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to six 2.5" SAS/SATA hard drives in a single 5.25" expansion bay. It can easily be installed into a case or expansion system & is ideal for servers & workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller. As the back plane system uses 2.5" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5" HDDs & requires less cooling
- so is quieter to run.
...

Allows 4 SATA drives to be connected to 1 external multilane connector Supports transfer speeds of up to 6 Gbps Metal bracket with mounting holes, SCSI-I (50 Way Centronics) form factor External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 year warranty This multilane adapter board can be used with an external drive enclosure to allow up to four SATA hard disks to be connected. A single multilane cable links the board to your host system. Mounted on a metal bracket, the SCSI-I (50 Way Centronics) form factor makes it absolutely ideal for upgrading older drive enclosures to use new high speed SAS/SATA drives. ...

Converts 4 internal SATA ports to 1 external multilane connector Supports transfer speeds of up to 6 Gbps Supplied with standard & low profile mounting brackets External multilane Mini-SAS SFF8088 connector for connecting to an external SAS/SATA storage system 2 Year warranty ...

Gives you better access to SATA ports Connectors: Latched 90 SATA 7 pin male, SATA 7 pin female Can be used with standard non-latching ports Use to redirect ports & connecting cables for a neater installation Provides a degree of stain relief on ports Dimensions: 16 x 34 x 7mm (Wx Dx H) Projects 8mm from ports when connected Ideal for situations where space or access is limited such as inside small form factor computers.
Colour: Black 10 Year Warranty
...

Plugs directly into an IDE drive 40 Way IDC Female (drive) to Serial ATA Male (controller) Serial ATA & Power Adaptor Cable included SATA & power adapter cable included Supports Serial ATA Generation 1 transfer rate of 1.5 G Byte/s Fully compliant with Serial ATA 1.0 specification 2 Year warranty ...

Plugs directly into an IDE hard drive (not suitable for use with CD/DVD drives) 40 Way IDC Female (drive) to Serial ATA Male (controller) 4 Pin power connector (3.5") Supports SATA speeds of up to 1.5 Gbps Fully compliant with SATA 1.0 specification Compatible with Ultra ATA 33/66/100/133 Plug & Play installation, no software required Chipset: JMicron JM20330 2 Year warranty HDD jumper must be set to Master ...

Change the gender of SATA connections Connectors: SATA 7 pin female, SATA 7 pin female Can be used as a gender changer or port extender Ideal for situations where space or access is limited such as inside small form factor computers Provides a degree of strain relief on ports Dimensions: 16 x 37 x 7mm (Wx Dx H)
Colour: Black 10 Year Warranty
...

The LINDY Modular AV Face Plate System means that you can create your own custom face plates by using a combination of Snap-in Blocks & Keystone modules. Install this SC Duplex Multimode face plate along side other Keystone & Snap-in modules. These modules provide a full range of solutions for AV, networking, voice & audio installations. The wide selection of modules & face plates can be custom configured giving you greater control & flexibility. Additional required products... Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Face Plates. Single Gang Face Plateor Double Gang Face Plate are also available. ...