Supports Video-Mirroring & Extended desktop modes Display Port Male to DVI-D Male connectors Compliant with Display Port 1.1



...

The LINDY Display Port to VGA cable converts the digital signal from the your Display Port connection on your computer into an analogue VGA signal for use with monitors or projectors. Simply connect the male Display Port connector in to the Display Port socket on your PC & the VGA connector to the VGA connection on your display. ...

This high-quality cable means that you can connect a computer with a DVI-I analogue output to a VGA monitor with a built-in VGA cable (i.e. 15 Way VGA Male) Many modern graphics cards feature both DVI-I (digital & analogue) & VGA (analogue) connectors. This cable is useful when you want to connect two VGA monitors to a computer equipped with one of these cards
- simply connect the first monitor to the VGA port & the second, using this cable, to the DVI port!
...

This high quality cable means that you can connect a computer with a DVI-I analogue output to a VGA monitor with a 15 Way VGA Female connector (i.e. a monitor with a removable VGA cable). Many modern graphics cards feature both DVI-I (digital & analogue) & VGA (analogue) connectors. This cable is useful when you want to connect two VGA monitors to a computer equipped with one of these cards
- simply connect the first monitor to the VGA port & the second, using this cable, to the DVI port!
...

DVI-D Dual Link Cable Ideal for use as an LCD monitor cable or DVI projector cable Dual Link connection supports resolutions of up to 2560 x 1600 Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male 10 Year Warranty ...

Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

DVI-I Single Link Digital + Analogue Cable For use with all standard digital TFT (Thin Film Transistor)/LCD (Liquid Crystal Display) Flat Panel Displays Single Link connection supports resolutions of up to 1920 x 1200 Connectors: DVI-I Single Link Male to DVI-I Single Link Male Also available in lengths of 1, 3 & 5m. 10 year warranty ...

25 Way D Male to 36 Way Centronics Male IEEE 1284 compliant Fully moulded 10 year warranty ...

e SATA 7 Pin Male to e SATA 7 Pin Male Supports SATA II speeds of up to 3 Gbit/sec ...