This high quality cable means that you can connect a computer with a DVI-I analogue output to a VGA monitor with a 15 Way VGA Female connector (i.e. a monitor with a removable VGA cable). Many modern graphics cards feature both DVI-I (digital & analogue) & VGA (analogue) connectors. This cable is useful when you want to connect two VGA monitors to a computer equipped with one of these cards
- simply connect the first monitor to the VGA port & the second, using this cable, to the DVI port!
...

DVI-D Dual Link Cable Ideal for use as an LCD monitor cable or DVI projector cable Dual Link connection supports resolutions of up to 2560 x 1600 Connectors: DVI-D Dual Link Male to DVI-D Dual Link Male 10 Year Warranty ...

DVI-D Single Link Cable For use as an LCD monitor cable or DVI projector cable Single Link connection supports resolutions of up to 1920 x 1200 Connectors: DVI-D Single Link Male to DVI-D Single Link Male 10 Year Warranty ...

Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

Features of the RF-BLOK shielded design: Reduced interference from one piece EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) shield Increased insulation resistance up to 25% No soldering requirements as interconnect design needs no 360 degree soldering
- eliminating the possibility of human error and/or cracking of the solder that causes grounding intermittence & the use of the most hazardous waste material
- soldering flux Tight fit of internal wires as there is no inner mould No requirement of ferrite cores as signal loss & degradation are greatly reduced giving enhanced signal sharpness. Without the ferrite cores the cable is less stressed & more flexible Smaller overall

Dimensions which allows more room behind the host or peripheral Increased connector & mating strength
- the 4 point reinforcement tabs on the RF-BLOK, attached to the connector, strengthens the pair as one




...

25 Way D Male to 36 Way Centronics Male IEEE 1284 compliant Fully moulded 10 year warranty ...

e SATA 7 Pin Male to e SATA 7 Pin Male Supports SATA II speeds of up to 3 Gbit/sec ...

This external cable integrates power, SATA & USB (Universal Serial Bus) data signals into a single cable. This means that you can use just one cable when being used with a compatible computer port & an external power over e SATA device. ideal to be used with our 1 Port Power e SATA & USB (Universal Serial Bus) 2.0 Backplate Adapter & 1 Port Power e SATA & USB (Universal Serial Bus) 2.0 Backplate Adapter. ...

European Mains Plug to IEC C7 Figure 8 Connector Socket 100% electrical & mechanical inspection Fully moulded 10 year warranty ...

This external e SATAp cable integrates both data & power signals into a single lead. It connects an external SATA hard disk or similar device to an e SATAp port. It can connect both 2.5" & 3.5" hard disks as it provides both +5VDC & +12V DC so can be used with both desktop & laptop computers (see note below). This cable is compatible with the latest generation of computers & interface cards that support power over e SATA. The cable may be used in conjunction with our 2 Port Power over e SATAp +USB PCI Express card & Power e SATA & USB (Universal Serial Bus) 2.0 Adapter Card. Note: Laptops typically supply up to 5V from the e SATA port, which is suitable for use with most 2.5" HDDs & SSDs; desktop computers typically supply up to 12V, which is suitable for both 2.5" & 3.5" drives. Please check that your computer's e SATA interface port supports power before using this cable. ...