2 x LC Female to 2 x LC Female, Duplex Multi-mode Snap-in mounting Metal ferrule Plastic housing ...

2 x SC Female to 2 x SC Female, Duplex Multi-mode Snap-in mounting Metal ferrule Plastic housing ...

2 x SC Female to 2 x SC Female, Duplex Single-mode Snap-in mounting Ceramic ferrule Plastic housing ...

ST Female to ST Female, Simplex Multi-mode Mounts into a standard 3/8" 'D' Hole Ceramic ferrule Metal housing ...

The LINDY Fibre Optic Display Port Extender sends signals over standard LC duplex fibre optic cable with no loss of quality or signal degradation from compression artifacts or electromagnetic interference. This means it is highly suited to the demanding standards required from professional signal transmission in the medical, military & presentation industries. Note: For indoor use only
- in non-condensing humidity environments Package Contents 1 x Fibre Optic Display Port Extender Unit 1 x Fibre Optic Display Port Receiver Unit 2 x MC Wall Mount Power Supplies with UK, Euro, US & AUS adapters LINDY Manual
...

Easy to set up & install the compact LINDY LC Fibre Optic DVI-D Extender is the most cost effective, high quality solution on the market for sending DVI-D signals over incredible distances. Send DVI-D signals without compression or any degradation over standard LC duplex multimode (50/125m) fibre cable up to 500m (not included) or up to an incredible 1500m using a LC duplex singlemode (9/125m) fibre optic cable. Unlike other solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable to reach such great lengths, so no additional cables are required. DVI-D control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected directly to both the DVI-D source & display. The modules are then connected together using a single, standard 'off the shelf' LC Fibre cable fibre optic cable (not included). ...

* Remote control requires our Infra red kit (sold separately) The LINDY Fibre Optic DVI-D Extender is the most high performance solution on the market for sending DVI-D signals over incredible distances. Using a standard SC duplex multimode (50/125) fibre optic cable (not included) to make the long distance connection, the DVI-D Extender provides full support for computer DVI-D Single Link & HDTV DVI-D signals, RS-232 & IR remote control. Unlike other manufacturer's solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable
- no additional cables are required for RS-232 or IR remote control. DVI-D, RS-232 & IR remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the DVI-D source & display using standard DVI-D cables of up to 5m. The modules are then connected together using a single, standard 'off the shelf' SC 50/125mduplex multimode cable of up to 300m in length (fibre optic cable is not included) Additional Requirements Fibre Optic Patch cable: SC duplex multimode cable (50/125m) (of required length up to 300m) Two DVI-D cables for connecting to source & display: DVI-D Male to Maleor Premium Gold DVI-D (up to 5m in length) LINDY Infra red kit for using IR remote controls Package Contents 1 x Fibre Optic DVI-D Transmitter Unit 1 x Fibre Optic DVI-D Receiver Unit 2 x Multi Country Power Supplies 8 x Rubber Feet (if not installed) LINDY Manual
...

* Remote control requires our Infra red kit (sold separately) The LINDY Fibre Optic DVI-D Extender is the most high performance solution on the market for sending DVI-D signals over incredible distances. Using a standard SC duplex single mode (9/125* Remote control requires our Infrared Kit (sold separately)) fibre optic cable (not included) to make the long distance connection, the DVI-D Extender provides full support for computer DVI-D Single Link & HDTV DVI-D signals, RS-232 & IR remote control. Unlike other manufacturer's solutions, the LINDY Fibre Optic DVI-D Extender uses just one duplex fibre cable
- no additional cables are required for RS-232 or IR remote control. DVI-D, RS-232 & IR remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the DVI-D source & display using standard DVI-D cables of up to 5m. The modules are then connected together using a single, standard SC duplex single mode fibre cable of up to 5km in length (fibre optic cable is not included) Package Contents 1 x Transmitter Unit 1 x Receiver Unit 2 x multi-country PSU, 5VDC, 2.6A Manual 8 x rubber feet (if not installed)
...

The LINDY Fibre Optic HDMI 4K UHD Extender is the most cost effective, high performance solution on the market for sending HDMI signals over incredible distances. Using a standard SC duplex multimode (50/125) fibre optic cable (not included) to make the long distance connection, the HDMI Extender provides full support for HD 1080p, HDCP, multi channel audio, CEC & IR remote control. Unlike other manufacturer's solutions, the LINDY Fibre Optic HDMI Extender uses just one duplex fibre cable
- no additional Ethernet patch cables are required for DDC & remote control. HD1080p, multi channel audio, HDCP, CEC & remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the HDMI source & display using standard HDMI cablesof up to 3m. The modules are then connected together using a single, standard 'off the shelf' SC 50/125mduplex multimode cable of up to 300m in length (fibre optic cable is not included) Additional Requirements Fibre Optic Patch cable: SC duplex multimode cable (50/125m) (of required length up to 300m) Two HDMI cables for connecting to source & display: HDMI Male to Male or Premium Gold HDMI Male to Male (up to 3m in length) LINDY Infra red kit for using IR remote controls Package Contents 1 x Fibre Optic HDMI Transmitter Unit 1 x Fibre Optic HDMI Receiver Unit 2 x Multi Country Power Supplies 8 x Rubber Feet LINDY Manual
...

The LINDY Fibre Optic HDMI 4K UHD Extender is the most cost effective, high performance solution on the market for sending HDMI signals over incredible distances. Using a standard LC duplex single mode (9/125) fibre optic cable (not included) to make the long distance connection, the HDMI Extender provides full support for HD 1080p, HDCP, multi channel audio, CEC & infrared remote control. If your video content does not include HDCP protection it is possible to use this extender to reach distances of up to 3km. Unlike other manufacturer's solutions, the LINDY Fibre Optic HDMI Extender uses just one duplex fibre cable
- no additional Ethernet patch cables are required for DDC or remote control. HD 1080p, multi channel audio, HDCP, CEC & remote control over a single cable! The extender system comprises two modules, a transmitter & a receiver, which are connected to both the HDMI source & display using standard HDMI cablesof up to 5m. The modules are then connected together using a single, standard LC duplex single mode fibre cable of up to 700m (3km if without HDCP) in length (fibre optic cable is not included). Package Contents 1 x Transmitter Unit 1 x Receiver Unit 2 x multi-country PSU, 5VDC, 2.6A Manual 8 x rubber feet (if not installed)
...