The LINDY ODD Caddy for 2.5" SATA HDD means that you can install a second internal hard drive in your notebook using the optical drive bay. This in turn can be used to add extra storage or additional dual boot capabilities to you computer. Package contents 1 x ODD Caddy for SATA HDD 4 x attachment screws ...

This sturdy slimline bracket means that you can mount your LCD or plasma TV to a wall. It consists of all the required fittings for mounting to timber uprights or a masonry wall. The design allows the TV to be mounted from only 3.2cm up to 53.8cm from the wall while it can also be adjusted up & down as well as left & right. Package Contents 1 x Wall Bracket with arms 1 x Back Plate 2 x Plasma/LCD TV upright brackets 6 x Wall Mount fixing bolts 1 x bag of fixing screws, washers, spring washers, spacers & tools 1 x Instruction Leaflet ...

Please note: Please check your TV is under the maximum supported weight before ordering ...

This sturdy bracket kit means that you can mount your LCD or plasma TV to a wall. It consists of two heavy gauge steel brackets & all required fittings for mounting to timber uprights or a masonry wall. The design also allows the TV to be tilted downwards up to 15for your viewing pleasure. Package Contents Slimline Plasma Bracket Wall fixing bolts Display fixing bolts Instruction leaflet ...

This kit is ideally suited for use on displays up to 20" in size, whilst the LINDY Large Screen Cleaning Kit with Brush is more suitable for bigger displays, keyboards & accessories. Ideal kit for keeping your TV, monitor, iPad or tablet displays clean. The spray on cleaning fluid is neatly stored within the specially designed handle of the cleaning pad. The soft micro-fibre cleaning pad is ergonomically designed to prevent scratching whilst removing dust & fingerprints from surfaces. How to use... Important: shut off power to all devices before cleaning! First remove the cleaning fluid spray by pushing it free from the handle of the kit... Spray adequate liquid onto the screen & replace the bottle back into the handle... Remove the clear protective cover from the cleaning pad & gently wipe over the surface... Use the same procedure when cleaning laptops... Clean your CDs, DVDs, Blu-ray discs using the same method... ...

These snap in blanking plates are designed to be used with the LINDY Modular AV Extender Wall Plate System which employs Balun technology to extend a combination of audio & video signals over low cost Cat 5e/6 cable. Choose from a range of snap in modules, including VGA, RCA/ Phono & S-Video modules including face plates, back boxes & bulk cable for a total extender solution. The blank plates may be customised by fitting your own adapter or connector. ...

The LINDY Modular AV Face Plate System means that you can create your own custom face plates by using a combination of Snap-in Blocks & Keystone modules. Use this VGA Snap-in Block to install a LINDY Premium Gold VGA cable or VGA Mini Gender Changer into a face plate along side other Keystone & Snap-in modules. These modules provide a full range of solutions for AV, networking, voice & audio installations. The wide selection of modules & face plates can be custom configured giving you greater control & flexibility. Additional required products... Please Note: The LINDY Modular AV Face Plate System must be used in conjunction with LINDY Face Plates. Single Gang Face Plateor Double Gang Face Plate are also available. Assembling a LINDY VGA Face Plate This guide shows you how to assemble a LINDY VGA Face Plate using our Premium Gold VGA cables & Holding Posts & Nuts. Parts you will need: This LINDY VGA Snap-in Blank Block A Single Gang or Double Gang Snap-in Face Plate A LINDY Premium Gold VGA cable according to your requirements Pack of Holding Posts & Nuts, Part No. 66025 (50 Pack) or Part No. 66026 (10 Pack) A Snap in Blanking Plate (optional) ...

This very useful device can convert either digital optical Tos Link or coaxial SPDIF signals to an analogue stereo 3.5mm output port. Both optical & coaxial cables can be connected at the same time & a simple switch determines which signal is active. This headphone version features amplification, with volume control, & allows higher sampling rates, up to 192 K Hz, for clearer audio output. ...

This very useful device can convert either digital optical Tos Link or coaxial SPDIF signals to analogue stereo left & right phono output ports. Both optical & coaxial cables can be connected at the same time & a simple switch determines which signal is active. This professional version allows higher sampling rates, up to 192 K Hz, for clearer audio output. Please note: This converter supports uncompressed digital audio stereo input signals such as PCM audio. It does not support compressed audio formats such as Dolby Digital, DTS, 5.1, etc. If you want to use it on your TV or digital home theatre set the digital audio output format on your device to PCM or any other uncompressed audio format. ...

Compact device for converting digital coax or optical to analogue stereo audio Input ports: 1 x Tos Link (Optical Fibre), 1 x Digital Coaxial (Phono) Input format: SPDIF, LPCM 2 Ch Output ports: 2 x Analogue Phono Ports (Left & Right) Supports uncompressed digital stereo audio input only (see below for more info) 2 year warranty This very useful device can convert either digital optical Tos Link or coaxial SPDIF signals to analogue stereo left & right phono output ports. Both optical & coaxial cables can be connected at the same time & a simple switch determines which signal is active. ...