Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
Port Doublers must be used in pairs by connecting one to the patch panel & the other to the wall outlet. ...
Connects 2 devices in parallel
Bridges all pairs
Existing installations can be expanded quickly & easily allowing additional telephones to be added temporarily or permanently
Saves adding additional cable runs
2 year warranty
'Y' Adaptors allows two telephones to be connected in parallel at different locations. Please note: this device does not give two individual lines but allows two connection points to share one line. Ideal for existing installations where additional cables cannot be installed easily. ...
Allows four telephones to be connected in parallel at different locations
Connects 4 devices in parallel
Only for analogue telephone lines, not Vo IP, LAN
Bridges all pairs
Existing installations can be expanded quickly & easily allowing additional telephones to be added temporarily or permanently
Saves adding additional cable runs
Ideal for existing installations where additional cables cannot be installed easily
Please note:this device does not give four individual lines but allows four connection points to share one line. ...
Please note:these multipliers are sold as single units not pairs.
This handy UTP port multiplier allows four UTP/RJ45 connections to be connected to one UTP port of a structured cabling system. CAT5/5e/6 cables used in a conventional Fast Ethernet network are made up of 8 conductors. This port multiplier uses these 8 conductors to provide four separate connections over a single cable run, without any loss of performance. Its the perfect device for easily adding additional connections to an existing network.
Port Multipliers must be used in pairs by connecting one to a patch panel & the other to a wall outlet. ...
This PS/2 to USB (Universal Serial Bus) adapter allows modern PCs, which do not have PS/2 ports, to be connected to LINDY 'U' Series modular KVM switches. In use it connects to the KVM cable's PS/2 keyboard connector & then plugs into the PC's USB (Universal Serial Bus) port.
Important: Please note this adapter is for use with LINDY 'U' Series modular switches only. If you require a standard PS/2 to USB (Universal Serial Bus) adapter (e.g. for converting keyboards & mice) please order LINDY Part No. 42866 ...
Unswitched 4 way power strip
Power "ON" indicator
Fitted with a sleeved 13 Amp UK plug
Can be wall mounted using the fixing holes on the rear of the housing
2 year warranty ...
Unswitched 4 way power strip
Power "ON" indicator
Fitted with a sleeved 13 Amp UK plug
Can be wall mounted using the fixing holes on the rear of the housing
2 year warranty ...
Unswitched 4 way power strip
Power "ON" indicator
Fitted with a sleeved 13 Amp UK plug
Can be wall mounted using the fixing holes on the rear of the housing
2 Year warranty ...
Archived Product
UK 3 Pin Mains Extension Lead, 10m
13 Amp extension socket
Cable type: 1.25mm
Cable length:10m
Complies to BS 1363/A and plug to BS 1363
2 year warranty
RIP - This product is no longer available on our network. It was last seen on 13.02.2012
This page now acts as a permanent archive for this product. Add more information using the comments box below to ensure it can still be found by future generations.
Use our search facility to see if it is available from an alternative contributor.