Overview: Bi-Directional converter for serial & parllel ATASATA Bilateral IDEIDE to SATA or SATA to IDE Adapter Bi-Directional converter for serial & parllel ATA This Adapter Does-it-All, SATA Hard Drive To IDE Converter or IDE Drive to SATA Host Converter This is a bi-direction converter for serial & parallel ATA translation. It

Includes:: the Serial ATA PHY, Link, Transport, & Parallel ATA (application layer) controller. the Serial ATA Physical, link & trnasport layers are compliant to Serial ATA 1.0. This converter supports a 1.5 G Hz data rate. Parallel & Serial ATA Bi-Directional Converter
Features: With LED Indicated power Easy install amp; No driver Needed Serial ATA 1.0

Specification compliant Automatic Serial ATA 1.5 Gbps speed negotiation ATA/ATAPI PIO mode 0 to 4 ATA/ATAPIPIUltra DMA of transfer rate 16.7/25, 33, 48, 66, 100, 133, & 150MB/S.ATA/ATAPIPI LBA48 addressing mode associated with 2-byte sector count Support Serial ATA hot-plug Uitr low power consumption Work for both AC abd DC couple between the transmitter & the receiver Provide specified OOB signal detection & transmission Support Spread Spectrum Clocking to reduce EMISupport Partial / Slumber power management Provide adjustable TX signal amplitude & pre-emphasis level Siave support Specification: Dimensions: 52 X 50 X 17 mm Weight:




...

Overview: Hot swap Antivibration rubber foot stand Fit 3.5in serial ATA hard drive Working without driver Security key lock Specifications: Dimensions: 6.77 in x 5.83 in x 1.65 in Weight: 13.58 ...

Overview:2 Bay 2.5inch internal enclosure Fit in any floppy bay Tool-less & driver-less for hard disk installation Compatible with hot swap, RAID SATA II, LED indicators for activity & power
Features:1. Hot swap 2. Stylish Front Panel Design With Excellent Ventilation 3. Sata/3.0GB/s High Speed Transfer 4. Fit floppy drive standard Bay 5. Working W/O any Driver or software 6. Tool Free Hard Disk Installation Specification: Fit 2.5inch serial ATA hard drive Hot Swap Interface: Standard SATA IIMin Hardware requirement:M/B With SATA Ports One Free Floppy Drive inside the case One SATAII (15PIN) Power cable One SATAII (7PIN) DATA cable Note: If the color out of our stock, we will ship the item in random. Specification: Weight Approx:410g Size Approx:16.5 x 12.5 x 4.5
...

Specifications: Dimensions: 2.56 in x 1.25 in x 0.24 in Weight: 0.35 ...

Highlights: Allows you to power your SATA devices such as SATA hard drives High quality SATA power cable ensures your SATA devices always have enough power Specification: Connector type: SATADimensions: 0.39 in x 0.94 in x 0.31 in Weight: 0.39 oz Package Contents:1 x SATA Power ...

Model: Hz M-3.5-USB; Connection Type: Adapter Cable; Plug Type: Universal; Certification:CCC; Port Gender: Male
- Female; Max Output
...

Overview:SATA Card Bus 32bit PC Card PCMCIA to serial ATA card Notebook Adapter Card Bus Card Operation is subject to the following two conditions: This device may not cause harmful interference, & this device must accept any interference that may cause undesired operation. Brand New, High Quality 32bit Card Bus compatible interface. Offer two high-speed SATA port connections to your notebook to allow two SATA devices that operate & transfer date at same time. Supports the over 137G capacity hard disk connection. There is perfect technology, it allows to insert & remove SATA port device without close system Data transfer rate of up to 3 Gbps Note: A random color will be dispatched if this product color becomes out of stock. Package Contents: 1x PCMCIA Card 1x CD1x SATA cable Specification: Weight Approx:95g Size Approx:8.5 x 5.5 x 0.5 ...

Specifications: Dimensions: 2.32 in x 2.05 in x 0.28 in Weight: 0.53 ...

Specifications: Dimensions: 2.2 in x 1.42 in x 0.36 in Weight: 0.46 ...

Overview: Pacakge content:1 x Dual e SATA Port PCI Bracket (connected two 7pin SATA cable & one power adapter cable)1 x 15 pin SATA adaptor cable 1 x e SATA to 7pin SATA cable Specification: Weight Approx:147.5g Size Approx:14 x 8 x 2 ...