SAFETY GUIDELINES1. Always use a charger specially designed for Li Po batteries.2. Always charge batteries in a fire proof container. Do not charge batteries on wood, cloth, carpet, in your model, or on any other flammable material.3. Never leave batteries unattended while charging.4. If a battery is deformed, swollen or appears damaged. DO NOT CHARGE. Follow the disposal instructions bellow to properly & safety steps:a. immediately remove the battery pack from your model or charger.b. place the battery in a non-flammable, well ventilated area.c. observe the battery for 30min from a safe distance.d. after 30min, if the pack appears stable, is not swollen & does not show any signs of damage, return the battery pack to normal use with caution.6. Do not let exposed battery wires touch each other.7. Store your batteries in a cool, dry place between 0-26℃.8. Do not assemble unmatched or dissimilar Lipo cells.9. Store battery packs out of the reach of children & pets. CHARGING INSTRUCTIONS1. Li Po cells feature a separate balancing plug that isolates each cell in pack & chargers it independently.2. Charge each battery pack individually. Never charge battery packs in series.3. Always check to make sure that your charger settings match those listed on the battery pack label.4. Make sure the battery connections are connected in the correct polarity.5. Always check battery pack voltage before charging. Do not discharge LIPO cells below 3.0V per cell.6. Do not charge at over 1C current.7. Do not peak charge to more than 4.2V per cell.8. Battery temperature is critical: a. charge temp. range: 0-43℃ b. discharge temp. range: 0-60℃ c. storage temp. range: 0-26℃ DISCHARGING INSTRUCTIONSNever discharge a LIPO battery pack at more than the recommended discharge rate. BATTERY DISPOSAL INSTRUCTIONS1. Discharge battery pack to 2.5V per cell or less.2. Fill a bucket with enough water to submerge the battery pack completely.3. Add salt to the water until no more salt will dissolve; the water is now saturated with salt. 4. Place the battery pack in the bucket & leave submerged in the salt water solution for 24 hours.5. Remove the battery pack from the salt water & test the voltage.6. If the voltage does not reach 0.0V, re-submerge & re-test until the voltage reach 0.0V.7. Once the battery pack has been discharged to 0.0V, it is safety dispose. In order to provide high quality & stable Li Po battery to you, we test each one carefully & circularly.