The Ansmann Mini Stylus 2-in-1 is designed for touchscreens on a practical key chain. It has two functions, one being a conductive stylus for using devices with a capacitive touchscreen like iPad, iPhone, iPod Touch & other smartphones, tablets, ebooks etc., & the second is a mini flashlight. The soft rubber tip prevents fingerprints or scratches on the display. It is compact, lightweight, solid & stylish. Inclusive 4x LR41 cells. Features Mini Stylus For Touchscreens With A Practical Key Chain Two Functions: Conductive Stylus & Mini Flashlight Inclusive 4x LR41 Cells Compact, Lightweight, Solid & Stylish Soft Rubber Tip Prevents Fingerprints Or Scratches On The Display ...

The Ansmann Penlight Clip is a handy pen styled pocket torch that runs on two included AAA batteries. made from high-quality aluminium with a silver finish the Ansmann Penlight Clip torch features an extra strong clip switch with a self-cleaning surface. Power: x 2 AA Batteries Dimensions: 121 x 12mm ...

The Ansmann Penlight Clip is a handy pen styled pocket torch that runs on two included AAA batteries. made from high-quality aluminium with a silver finish the Ansmann Penlight Clip torch features an extra strong clip switch with a self-cleaning surface. Power: x 2 AA Batteries Dimensions: 121 x 12mm ...

The Ansmann Photo Cam III is a microcontrolled, negative delta V contolled battery charger. Complete with x 4 Ansmann AA 2700m Ah Ni MH fast rechargeable batteries this Ansmann Photo Cam III battery charger is suitable for charging two or four AA / AAA rechargeable batteries.
- Plug-in charger for 2-4 Micro AAA or Mignon AA cells
- Microprocessor control guarantee best charging results independent of capacity, charge status & type of batteries
- Fast charge
- Protection against reverse polarity
- Trickle charge avoids discharge of cells after fast charge
- Charging status indicators Charging currents are as follows: AA / AAA = 400m A





...

The Ansmann Photo Cam III comes complete with 4 x AA 2850m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 8 hours for 2850m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA- Charging currents: Micro AAA 500m A, Mignon AA 500m A- Charging time for Mignon 1000m Ah is 2.4h- Charging status indicator via LED- Over charging protection by Delta peak detection & safety timer- Faulty cell detection- Alkaline insertion error detection- Reverse connect protection- Trickle charging- Wide range input 100-240V AC- Including 4x Mignon AA 2850m Ah Digital or 4x Mignon AA 2100m Ah max E- Dimension: 120x 68x 72mm- Weight: 280g- 3 years warranty

...

The Ansmann Photo Cam III comes complete with 4x max E AA 2100m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The AA max E battery has a capacity of 2100m Ah & is delivered pre-charged with the very low self-discharge max E characteristics. This means that it can be used in most applications even up to one year after charging. This charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 5 hours for 2100m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA- Charging currents: Micro AAA 500m A, Mignon AA 500m A- Charging time for Mignon 1000m Ah is 2.4h- Charging status indicator via LED- Over charging protection by Delta peak detection & safety timer- Faulty cell detection- Alkaline insertion error detection- Reverse connect protection- Trickle charging- Wide range input 100-240V AC- Including 4x Mignon AA 2100m Ah max E- Dimension: 120x 68x 72mm- Weight: 280g- 3 years warranty

...

The Ansmann Photo Cam III comes complete with 4x max E AA 2100m Ah rechargeable batteries & can charge 2 or 4, AA or AAA batteries. The AA max E battery has a capacity of 2100m Ah & is delivered pre-charged with the very low self-discharge max E characteristics. This means that it can be used in most applications even up to one year after charging. This charger will not only fast charge fully discharged cells, but also top-up partially used cells back to full capacity. It has a fast, intelligent Charge
- 500m A charge current. Charging is Approx. 5 hours for 2100m Ah cells when fully discharged, but proportionally lower depending on each battery's charge status. A microprocessor controller monitors each set of cells inserted. Suitable for Ni MH or Ni Cd batteries. Comes with compact & lightweight UK plug top housing for 230V mains operation.
- For 2x/4x Micro AAA, Mignon AA
- Charging currents: Micro AAA 500m A, Mignon AA 500m A
- Charging time for Mignon 1000m Ah is 2.4h
- Charging status indicator via LED
- Over charging protection by Delta peak detection & safety timer
- Faulty cell detection
- Alkaline insertion error detection
- Reverse connect protection
- Trickle charging
- Wide range input 100-240V AC
- Including 4x Mignon AA 2100m Ah max E
- Dimension: 120x 68x 72mm
- Weight: 280g
- 3 years warranty














...

The Ansmann Photocam III Battery Charger

Includes:: 4x max E Ni MH AA 2100 m Ah is a plug-in charger for 2

...

The Ansmann Photo Cam V is a fast, intelligent charger with the following charging currents: 800m A for 1-2 AA, C or D; 400m A for 3-4 AA, C or D; 400m A for 1-2 AAA; 200m A for 3-4 AAA; 15m A for 1 9V block. There is a capacity test for Approx. 5 seconds after the insertion of the cells & a microprocessor controller monitors each set of cells inserted & individual charging of each cell position. This Charger can tell if you have accidentally inserted an Alkaline battery & has Delta Peak detection to ensure the batteries do not get overcharged. It is available for worldwide use due to the 100-240V AC power supply.
- For charging up to 4x Micro AAA, Mignon AA, Baby C, Mono D, 1x 9V E-Block- Charging currents: Micro AAA 400/200m A, Mignon AA 800/400m A, Baby C 800/400m A, Mono D 800/400m A, 9V E-Block 15m A- Charging time for Mignon AA 1000m Ah 1.5h (1.2)/3h (3-4)- Charging status indicator via LED- Individual charging of each cell position- Reverse polarity protection- Worldwide use (100-240V AC / 50-60 Hz)- Capacity quick test for approx. 5 seconds after inserting the cells- Microprocessor controlled charging- Automatic charging current adjustment- Multiple over-charging protection- Trickle charging- Faulty cell detection / accidental Alkaline insertion detection- Dimension: 170x 155x 50mm- Weight: 430g- 3 year warranty
...

The Ansmann Photo Cam V is a fast, intelligent charger with the following charging currents: 800m A for 1-2 AA, C or D; 400m A for 3-4 AA, C or D; 400m A for 1-2 AAA; 200m A for 3-4 AAA; 15m A for 1 9V block. There is a capacity test for Approx. 5 seconds after the insertion of the cells & a microprocessor controller monitors each set of cells inserted & individual charging of each cell position. This Charger can tell if you have accidentally inserted an Alkaline battery & has Delta Peak detection to ensure the batteries do not get overcharged. It is available for worldwide use due to the 100-240V AC power supply.
- For charging up to 4x Micro AAA, Mignon AA, Baby C, Mono D, 1x 9V E-Block
- Charging currents: Micro AAA 400/200m A, Mignon AA 800/400m A, Baby C 800/400m A, Mono D 800/400m A, 9V E-Block 15m A
- Charging time for Mignon AA 1000m Ah 1.5h (1.2)/3h (3-4)
- Charging status indicator via LED
- Individual charging of each cell position
- Reverse polarity protection
- Worldwide use (100-240V AC / 50-60 Hz)
- Capacity quick test for approx. 5 seconds after inserting the cells
- Microprocessor controlled charging
- Automatic charging current adjustment
- Multiple over-charging protection
- Trickle charging
- Faulty cell detection / accidental Alkaline insertion detection
- Dimension: 170x 155x 50mm
- Weight: 430g
- 3 year warranty















...