United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
Belay and Protection
Available
-
The DMM Alloy Offset is
the development of the
original HB offset
designed and made by the
legendary Hugh Banner who
founded HB Climbing
Equipment. Hugh realised
that conventional nuts
don’t sit well in
flared cracks, so he
designed the Offset. HB
Climbing Equipment closed
in 2005, so DMM have
taken up the mantle and
produced a new version of
the old classic. The DMM
Offset is forged from a
solid bar of aluminium
alloy to produce the
asymmetrical shape with
side recesses to provide
different and varied
placement options. The
wire has been fully
recessed into the head to
make it smoother, safer
and stronger. On the two
largest sizes the sides
have even been drilled to
reduce weight. Colour
coded to compliment the
rest of the DMM
protection range and
designed to follow on
from where the Brass
Offsets end. When you are
struggling to get your
Wallnuts to sit nicely in
uneven and flared cracks,
shove in an Offset and
relax.
Availability: In Stock
£9.00
Available
-
The Black Diamond twin
axle design used on the
Camalot C4 range allows
retraction of larger cam
lobes to give a
much wider expansion
range than normal single
axle cams. So you need
to carry fewer cams to
cover a wider size of
cracks and placements.
The C4s are lightweight
and very slick to use,
even with gloves on,
making them the worlds
number one
camming device. Go on,
treat yourself.
Double-axle design offers
widest range for each cam
unit C-Loop continuous
cable stem design is
strong and durable
Color-coded for easy
identification and wide
range of sizes
Availability: In Stock
£54.00
Available
-
An incredibly lightweight
and versatile belay
device that suits just
about any rope and
climbing situation. The
V-shaped friction
channels give smooth and
effective braking from
thin to thick ropes and
the asymmetrically
grooved sidewalls
increase braking power
during a fall or when
abseiling yet still allow
smooth rope slide during
belaying. With the
Reverso in normal mode
you can belay the leader,
one or two seconding
climbers and also abseil.
In Reverso mode (or
remote belay) you bring
up one or two second
climbers in comfort and
safety on multi pitch
routes then simply switch
to normal mode on the
changeover to belay the
leader. The smaller
karabiner hole allows for
easy for and smooth
release of rope when
heavily loaded in Reverso
mode. The Reverso is very
kind to your rope, it
will not kink or twist
even when using two
different diameter ropes
and it separates the
strands nicely when
belaying and abseiling.
Ultra-light design: -
minimalist construction -
hot-forged aluminum -
Weight: 59 g A single
device for all rope
types: - effective
braking on half and twin
ropes ≥ 7.5 mm -
effective braking on
single ropes ≥ 8.9 mm
- can belay the leader,
one or two seconding
climbers and can be used
for rappelling -
independent and
simultaneous belaying of
one or two seconding
climbers in Reverso mode
- quick changeovers from
Reverso mode to belaying
the leader when climbing
multi-pitch routes
V-shaped friction
channels: - increased
friction on thin ropes -
friction is adapted for
larger diameter ropes -
increases the locking
pressure on the ropes in
Reverso mode
Asymmetrically grooved
sidewalls: - increased
braking power during a
leader or top rope fall
or while rappelling -
rope slides smoothly
through device when
taking up slack Carabiner
hole allows the loaded
device in Reverso mode to
be easily and gradually
released with only a
carabiner Rope friendly,
allows for smooth
belaying and rope
handling: - will not kink
the ropes regardless of
the mode used - separates
the two strands of rope
when belaying and
rappelling Intuitive use:
- Reverso mode aluminum
attachment point is easy
to identify - keeper
cable keeps the device
from moving up the rope
when belaying and reduces
chances of losing the
device - usage diagrams
(standard belay and
Reverso modes) engraved
on device
Availability: In Stock
£25.20
Available
-
Beal Antipodes
10.5mm Static
Rope 50m. This is a
popular rope for caving
and abseiling.A popular
rope for caving
and abseiling. The
10.5mm diameter makes
for easy rope handling
and longevity. 38% of the
diameter of the rope is
comprised of sheath. This
rope is not suitable for
climbing or any
activity where it can be
shock loaded!
Availability: In Stock
£74.43
Available
-
The Black Diamond twin
axle design used on the
Camalot C4 range allows
retraction of larger cam
lobes to give a
much wider expansion
range than normal single
axle cams. So you need
to carry fewer cams to
cover a wider size of
cracks and placements.
The C4s are lightweight
and very slick to use,
even with gloves on,
making them the worlds
number one
camming device. Go on,
treat yourself.
Double-axle design offers
widest range for each cam
unit C-Loop continuous
cable stem design is
strong and durable
Color-coded for easy
identification and wide
range of sizes
Availability: In Stock
£47.70
Available
-
The Black Diamond twin
axle design used on the
Camalot C4 range allows
retraction of larger cam
lobes to give a
much wider expansion
range than normal single
axle cams. So you need
to carry fewer cams to
cover a wider size of
cracks and placements.
The C4s are lightweight
and very slick to use,
even with gloves on,
making them the worlds
number one
camming device. Go on,
treat yourself.
Double-axle design offers
widest range for each cam
unit C-Loop continuous
cable stem design is
strong and durable
Color-coded for easy
identification and wide
range of sizes
Availability: In Stock
£49.50
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£9.90
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£8.10
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£10.80
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£9.90
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£38.70
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£8.10
Available
-
This versatile
lightweight belaying and
abseiling device is now
30% lighter than the
original ATC (Air Traffic
Controller) thanks to
improved construction and
cut outs in the sides.
The variable friction
modes allow a wide range
of rope diameters from
7.7 to 11mm and the high
friction mode is
especially useful in
desperate situations or
when belaying heavier
partners. The
stiff cable keeps the
ATC XP where it should be
and avoids rope tangling
making this slick device
completely intuitive to
use. 30% lighter than the
original High-friction
mode offers 3 times
greater hold and stopping
power than
regular-friction mode
Machined windows through
device for weight savings
Durable cable holds its
shape and resists getting
caught up between ropes
Hot-forged construction
Versatile design accepts
ropes from 7.7 to 11 mm
Availability: In Stock
£18.00
Available
-
An incredibly lightweight
and versatile belay
device that suits just
about any rope and
climbing situation. The
V-shaped friction
channels give smooth and
effective braking from
thin to thick ropes and
the asymmetrically
grooved sidewalls
increase braking power
during a fall or when
abseiling yet still allow
smooth rope slide during
belaying. With the
Reverso in normal mode
you can belay the leader,
one or two seconding
climbers and also
abseil. In Reverso mode
(or remote belay) you
bring up one or two
second climbers in
comfort and safety on
multi pitch routes then
simply switch to normal
mode on the changeover to
belay the leader. The
smaller karabiner hole
allows for easy for and
smooth release of rope
when heavily loaded in
Reverso mode. The Reverso
is very kind to your
rope, it will not kink
or twist even when using
two different diameter
ropes and it separates
the strands nicely when
belaying and abseiling.
Ultra-light design: -
minimalist construction -
hot-forged aluminium -
Weight: 59 g A single
device for all rope
types: - effective
braking on half and twin
ropes ≥ 7.5 mm -
effective braking on
single ropes ≥ 8.9 mm -
can belay the leader,
one or two seconding
climbers and can be used
for rappelling -
independent and
simultaneous belaying of
one or two seconding
climbers in Reverso mode
- quick changeovers from
Reverso mode to belaying
the leader when climbing
multi-pitch routes
V-shaped friction
channels: - increased
friction on thin ropes -
friction is adapted for
larger diameter ropes -
increases the locking
pressure on the ropes in
Reverso mode
Asymmetrically grooved
sidewalls: - increased
braking power during a
leader or top rope fall
or while rappelling -
rope slides smoothly
through device when
taking up slack Karabiner
hole allows the loaded
device in Reverso mode to
be easily and gradually
released with only a
karabiner Rope friendly,
allows for smooth
belaying and rope
handling: - will not kink
the ropes regardless of
the mode used - separates
the two strands of rope
when belaying and
rappelling Intuitive use:
- Reverso mode aluminium
attachment point is easy
to identify - keeper
cable keeps the device
from moving up the rope
when belaying and reduces
chances of losing the
device - usage diagrams
(standard belay and
Reverso modes) engraved
on device
Availability: In Stock
£25.20
Available
-
This brilliant device
works on all dynamic
single ropes from 8.9 –
11mm, but is optimised
for 9.4 – 10.3mm
ropes. The unique
design feature of the
Grigri is its assisted
braking, giving
confidence to beginners
and experienced climbers
alike. The Grigri 2 has
a new design that
improves control on
descents, eliminating
rope jam and sudden
release to allow a very
gradual release of the
rope especially when
abseiling or lowering a
partner. The Grigri 2
is 25% smaller and 20%
lighter than the
original. Belay
technique identical to
classic belay systems:
both hands on the rope. A
fall is stopped by
tightening the hand on
the free end of the rope
Assisted braking: during
fall arrest, the belayer
holds the free end of the
rope, the cam pivots and
pinches the rope,
increasing the braking
action until the rope
stops sliding The GRIGRI
2 has a new design that
allows excellent control
during the descent. One
hand holds the rope and
the other uses the handle
to unlock the cam. The
patented handle design
allows a very gradual
release of the rope. In
combination with the
strong braking action of
the cam, it gives a
great feeling of security
when lowering a partner
or rappelling The GRIGRI
2 is compact and
ultra-light at 185 g (25
% smaller and 20 %
lighter than the GRIGRI)
Built with a stainless
steel friction plate and
cam to ensure a long life
for the product For 8.9
to 11 mm single ropes
(optimised for 9.4 mm to
10.3 mm ropes) Diagrams
for rope installation
engraved on belay device
(interior and exterior)
Availability: In Stock
£60.30
Available
-
The Lyon
60cm Dyneema Sling. These
Slings are great value
for money without
any compromise on
strength. Great for
rigging up belay anchors,
and even though they
are a bit thinner than
the Nylon slings, this
makes them great for
those tricking thin
threads that make a
bomber gear placement
just when you need that
extra reassurance.
Width: 15mm
Strength: 22kN
Certification: EN 566
Availability: In Stock
£5.40
Available
-
Lyon 240cm Nylon
(Polymide) Sling 18mm.
These Slings are great
value for money without
any compromise on
strength. Great for
rigging up belay anchors.
Nylon sling are wider and
heavier than
their Dyneema counter
parts but if anything
they provide great visual
reassurance to help boost
confidence in gear
placements. Conform
with EN566 Breaking
Load: 25kN
Availability: In Stock
£8.10
Available
-
Lyon 480cm Nylon
(Polymide) Sling 18mm.
These Slings are great
value for money without
any compromise on
strength. Great for
rigging up belay anchors.
Nylon sling are wider and
heavier than
their Dyneema counter
parts but if anything
they provide great visual
reassurance to help boost
confidence in gear
placements. Conform
with EN566 Breaking
Load: 25kN
Availability: In Stock
£14.18
Available
-
Lyon 120cm Nylon
(Polymide) Sling 18mm.
These Slings are great
value for money without
any compromise on
strength. Great for
rigging up belay anchors.
Nylon sling are wider and
heavier than their
Dyneema counter parts
but if anything they
provide great visual
reassurance to help boost
confidence in gear
placements. Conform
with EN566 Breaking
Load: 25kN
Availability: In Stock
£5.40
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£9.90
Available
-
This brilliant device
works on all dynamic
single ropes from 8.9 –
11mm, but is optimised
for 9.4 – 10.3mm
ropes. The unique
design feature of the
Grigri is its assisted
braking, giving
confidence to beginners
and experienced climbers
alike. The Grigri 2 has
a new design that
improves control on
descents, eliminating
rope jam and sudden
release to allow a very
gradual release of the
rope especially when
abseiling or lowering a
partner. The Grigri 2
is 25% smaller and 20%
lighter than the
original. Belay
technique identical to
classic belay systems:
both hands on the rope. A
fall is stopped by
tightening the hand on
the free end of the rope
Assisted braking: during
fall arrest, the belayer
holds the free end of the
rope, the cam pivots and
pinches the rope,
increasing the braking
action until the rope
stops sliding The GRIGRI
2 has a new design that
allows excellent control
during the descent. One
hand holds the rope and
the other uses the handle
to unlock the cam. The
patented handle design
allows a very gradual
release of the rope. In
combination with the
strong braking action of
the cam, it gives a
great feeling of security
when lowering a partner
or rappelling The GRIGRI
2 is compact and
ultra-light at 185 g (25
% smaller and 20 %
lighter than the GRIGRI)
Built with a stainless
steel friction plate and
cam to ensure a long life
for the product For 8.9
to 11 mm single ropes
(optimised for 9.4 mm to
10.3 mm ropes) Diagrams
for rope installation
engraved on belay device
(interior and exterior)
Availability: In Stock
£60.30
Available
-
The Beal Booster 9.7mm x
60m. A slick free running
top end, lightweight,
do it all single rope.
With excellent strength
and a low impact force
for hard use and
experienced climbers.
This top end rope
features some clever
technologies to prolong
life, enhance
performance and safety.
Dry cover is a water
repellant treatment that
is added to every fibre
of
the sheath of the rope
prior to manufacturing.
This covering is then
polymerised at high
temepratures to ensure it
stays put and resists
wear. The durable and
tightly woven sheath
resists wear over sharp
edges and the centre of
the rope is marked with
an indelible ink so it is
easily spotted. Dry cover
water repellency Tightly
woven sheath Wear
resistant A good
compromise between
weight, free-running,
grip and strength Low
impact force Increased
number of falls held
Supplied with handy
carry/storage bag
Availability: In Stock
£156.60
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£7.65
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£7.65
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£38.70
Available
-
Beal Edlinger 10.2mm
Dynamic rope X 60m. A
classic do it all
climbing rope, with all
the quality and safety
you would expect from
Beal manufacturing but
without the surface
treatments found on the
rest of the Beal range.
Perfect
for trad climbing,
outdoors and indoors,
the occasional sport
route and winter routes.
Please note
that colours may vary
from the picture shown
due to availability.
Availability: In Stock
£86.40
Available
-
The
Bug will happily handle
ropes from 8.5 to 11mm.
Medium to fat ropes will
run through the Bug super
smoothly, when chucking
out for the leader or
bringing up a second. But
it is secure enough to
grab a big whipper! The
Bug can be used as an
abseil device and even
works well on wet
ropes...perfect for the
UK then! Its hot
forged, rumbled and
anodised to give a kind
rope bearing surfaces and
has a hard wearing nylon
coated wire to stop it
escaping. Classic belay
device Ideal with medium
to ‘fat’ ropes (8.5mm
– 11mm) Solid holding
power Smooth rope feeding
action Anodised for
corrosion resistance
Please note the that
colour supplied may not
match the picture shown.
If you require a
specific colour then
please contact us and
well see what weve got.
Availability: In Stock
£10.80
Available
-
The Lyon
120cm Dyneema Sling. These
Slings are great value
for money without
any compromise on
strength. Great for
rigging up belay anchors,
and even though they
are a bit thinner than
the Nylon slings, this
makes them great for
those tricking thin
threads that make a
bomber gear placement
just when you need that
extra reassurance.
Width: 15mm
Strength: 22kN
Certification: EN 566
Availability: In Stock
£8.10
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£7.65
Available
-
The absolute classic
design from Black Diamond
that is perfect for all
belaying and abseiling
duties. The ATC (Air
Traffic Controller) has a
large heat dissipating
surface area that
protects it from over
heating during long
abseils or lowers. Smooth
internal geometry handles
ropes from 7.7 mm to 11
mm and a good stiff
keeper wire stops it from
getting jammed up in your
belay carabiner.
Minimalist, easy-to-use
design is well suited for
a wide variety of
climbing situations Large
surface area dissipates
heat while lowering or
rappelling Durable cable
holds its shape and
resists getting caught
between ropes Hot-forged
construction Handles
ropes from 7.7 mm to 11
mm
Availability: In Stock
£13.50
Available
-
A really useful set of
the most popular sizes of
the brilliant Black
Diamond Hexentrics. The
asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£67.50
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£8.55
Available
-
Beal 10.5mm Antipodes
Static Rope Made to
Measure.Charged
per metre, simply alter
the quantity in your
basket to achieve the
desired length. This is a
popular rope for caving
and abseiling. This is
sold by the metre and
we cut this rope in the
shop using a hot knife
which seals the ends to
avoid fraying and sheath
slippage. This rope is
not suitable for climbing
or any activity where it
can be shock loaded!
Please note
that colours may vary
from the picture shown
due to availability.
Availability: In Stock
£1.58
Available
-
The Black Diamond twin
axle design used on the
Camalot C4 range allows
retraction of larger cam
lobes to give a
much wider expansion
range than normal single
axle cams. So you need
to carry fewer cams to
cover a wider size of
cracks and placements.
The C4s are lightweight
and very slick to use,
even with gloves on,
making them the worlds
number one
camming device. Go on,
treat yourself.
Double-axle design offers
widest range for each cam
unit C-Loop continuous
cable stem design is
strong and durable
Color-coded for easy
identification and wide
range of sizes
Availability: In Stock
£49.50
Available
-
The Black Diamond twin
axle design used on the
Camalot C4 range allows
retraction of larger cam
lobes to give a
much wider expansion
range than normal single
axle cams. So you need
to carry fewer cams to
cover a wider size of
cracks and placements.
The C4s are lightweight
and very slick to use,
even with gloves on,
making them the worlds
number one
camming device. Go on,
treat yourself.
Double-axle design offers
widest range for each cam
unit C-Loop continuous
cable stem design is
strong and durable
Color-coded for easy
identification and wide
range of sizes
Availability: In Stock
£47.70
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£7.65
Available
-
The DMM Alloy Offset is
the development of the
original HB offset
designed and made by the
legendary Hugh Banner who
founded HB Climbing
Equipment. Hugh realised
that conventional nuts
don’t sit well in
flared cracks, so he
designed the Offset. HB
Climbing Equipment closed
in 2005, so DMM have
taken up the mantle and
produced a new version of
the old classic. The DMM
Offset is forged from a
solid bar of aluminium
alloy to produce the
asymmetrical shape with
side recesses to provide
different and varied
placement options. The
wire has been fully
recessed into the head to
make it smoother, safer
and stronger. On the two
largest sizes the sides
have even been drilled to
reduce weight. Colour
coded to compliment the
rest of the DMM
protection range and
designed to follow on
from where the Brass
Offsets end. When you are
struggling to get your
Wallnuts to sit nicely in
uneven and flared cracks,
shove in an Offset and
relax.
Availability: In Stock
£9.00
Available
-
Beal Edlinger
10.2mm Drum Per Metre.
A classic do it all
climbing rope with all
the quality and safety
you would expect from
Beal quality
manufacturing but without
the surface treatments
found on the rest of the
Beal range. Perfect for
trad climbing, outdoors
and indoors, the
occasional sport route
and winter routes. This
is sold by the metre and
we cut this rope in the
shop using a hot knife
which seals the ends to
avoid fraying and sheath
slippage.
Please adjust the quantity on
the product page
before adding to your basket.
Please note that colours
may vary from the picture
shown due to
availability.
Availability: In Stock
£1.44
Available
-
This classic DMM figure
of 8 is nicely made with
smooth faces and is ideal
for groups and centre use,
or for those who prefer
to keep things simple.
This sturdy belay and
abseil device is made
from alloy and is heat
treated to make it
extremely durable and
resistant to constant use
and abuse. Classic abseil
device Budget price
Anodised for corrosion
resistance Combination of
alloy and heat treatment
make the Figure 8 durable
Availability: In Stock
£10.80
Available
-
The DMM Alloy Offset is
the development of the
original HB offset
designed and made by the
legendary Hugh Banner who
founded HB Climbing
Equipment. Hugh realised
that conventional nuts
don’t sit well in
flared cracks, so he
designed the Offset. HB
Climbing Equipment closed
in 2005, so DMM have
taken up the mantle and
produced a new version of
the old classic. The DMM
Offset is forged from a
solid bar of aluminium
alloy to produce the
asymmetrical shape with
side recesses to provide
different and varied
placement options. The
wire has been fully
recessed into the head to
make it smoother, safer
and stronger. On the two
largest sizes the sides
have even been drilled to
reduce weight. Colour
coded to compliment the
rest of the DMM
protection range and
designed to follow on
from where the Brass
Offsets end. When you are
struggling to get your
Wallnuts to sit nicely in
uneven and flared cracks,
shove in an Offset and
relax.
Availability: In Stock
£9.00
Available
-
The Black Diamond twin
axle design used on the
Camalot C4 range allows
retraction of larger cam
lobes to give a
much wider expansion
range than normal single
axle cams. So you need to
carry fewer cams to cover
a wider size of cracks
and placements. The C4s
are lightweight and very
slick to use, even with
gloves on, making them
the worlds number one
camming device. Go on,
treat yourself.
Double-axle design offers
widest range for each cam
unit C-Loop continuous
cable stem design is
strong and durable
Color-coded for easy
identification and wide
range of sizes
Availability: In Stock
£49.50
Available
-
The absolute classic
design from Black Diamond
that is perfect for all
belaying and abseiling
duties. The ATC (Air
Traffic Controller) has a
large heat dissipating
surface area that
protects it from over
heating during long
abseils or lowers. Smooth
internal geometry handles
ropes from 7.7 mm to 11
mm and a good stiff
keeper wire stops it from
getting jammed up in your
belay carabiner.
Minimalist, easy-to-use
design is well suited for
a wide variety of
climbing situations Large
surface area dissipates
heat while lowering or
rappelling Durable cable
holds its shape and
resists getting caught
between ropes Hot-forged
construction Handles
ropes from 7.7 mm to 11
mm
Availability: In Stock
£13.50
Available
-
The DMM Alloy Offset is
the development of the
original HB offset
designed and made by the
legendary Hugh Banner who
founded HB Climbing
Equipment. Hugh realised
that conventional nuts
don’t sit well in
flared cracks, so he
designed the Offset. HB
Climbing Equipment closed
in 2005, so DMM have
taken up the mantle and
produced a new version of
the old classic. The DMM
Offset is forged from a
solid bar of aluminium
alloy to produce the
asymmetrical shape with
side recesses to provide
different and varied
placement options. The
wire has been fully
recessed into the head to
make it smoother, safer
and stronger. On the two
largest sizes the sides
have even been drilled to
reduce weight. Colour
coded to compliment the
rest of the DMM
protection range and
designed to follow on
from where the Brass
Offsets end. When you are
struggling to get your
Wallnuts to sit nicely in
uneven and flared cracks,
shove in an Offset and
relax.
Availability: In Stock
£9.00
Available
-
The DMM Dragon Cam is a
patented twin axle,
single stem camming
device that is the
perfect mainstream cam
for traditional climbing.
This set comprises of
sizes 2, 3 and 4 giving
you a wide range of
placement options for
trad climbing. Dragons
have been designed
without compromise to
produce a blend of
strength, lightness and
functionality. The cams
use a single stem with
hot forged cams mounted
on a dual axle. DMM have
kept Ray Jardines
original 13.75 degree
constant camming angle
that maximises holding
power without
compromising range. They
have also kept the
extendable, double
dyneema sling that saves
on quickdraws and reduces
the weight of your rack
even further. These are
the fundamentals around
which Dragons are
designed. Features: Hot
forged cams that combine
lightness with strength.
Twin axle design for
extended expansion range
and smooth action.
Constant 13.75 degrees
camming angle. Extendable
8mm dyneema sling. Strong
springs help create a
stable placement that
resists walking. Moulded
ergonomic trigger bar.
Replaceable trigger wire
system. Colour coded for
easy size recognition.
Anodised cams for
corrosion prevention.
Availability: In Stock
£144.00
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£11.70
Available
-
The absolute classic
design from Black Diamond
that is perfect for all
belaying and abseiling
duties. The ATC (Air
Traffic Controller) has a
large heat dissipating
surface area that
protects it from over
heating during long
abseils or lowers. Smooth
internal geometry handles
ropes from 7.7 mm to 11
mm and a good stiff
keeper wire stops it from
getting jammed up in your
belay carabiner.
Minimalist, easy-to-use
design is well suited for
a wide variety of
climbing situations Large
surface area dissipates
heat while lowering or
rappelling Durable cable
holds its shape and
resists getting caught
between ropes Hot-forged
construction Handles
ropes from 7.7 mm to 11
mm
Availability: In Stock
£13.50
Available
-
Beal Top Gun 10.5mm x 60m
Single Rope. A beast of
a rope with top
performance and great
strength. With an
impressive fall rating
for ropes of this class
and a low impact force
this rope will take a
beasting and come back
for more. This top end
rope features some clever
technologies to prolong
life, enhance
performance and safety.
Dry cover is a water
repellant treatment that
is added to every fibre
of
the sheath of the rope
prior to manufacturing.
This covering is then
polymerised at high
temepratures to ensure it
stays put and resists
wear. The durable and
tightly woven sheath
resists wear over sharp
edges and the centre of
the rope is marked with
an indelible ink so it is
easily spotted. Supplied
with handy carry/storage
bag. Colours may vary
from the picture shown
due to availability.
Availability: In Stock
£169.20
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£8.10
Available
-
The big hex is dead,
long live the big hex!
Torque nuts are a much
more sophisticated
replacement for the old
sea gull slayers. This
compact range of sizes
replaces the sizes
previously covered by 6
hex nuts and provides
protection in cracks from
finger to fist size. They
work well in all crack
situations especially
when placed in a camming
situation. They feature a
double dyneema sling
which when shortened
stops them smacking your
knees, but can be
extended once the nut is
placed reducing the
number of quickdraws
required. The Sling is
recessed into the head,
protecting it from wear
and tear and the drilled
holes have been enlarged
to make extending and
shortening the sling
quick and easy.
Availability: In Stock
£45.00
Available
-
The Lyon
240cm Dyneema Sling. These
Slings are great value
for money without
any compromise on
strength. Great for
rigging up belay anchors,
and even though they
are a bit thinner than
the Nylon slings, this
makes them great for
those tricking thin
threads that make a
bomber gear placement
just when you need that
extra reassurance.
Width: 15mm
Strength: 22kN
Certification: EN 566
Availability: In Stock
£13.50
Available
-
This versatile
lightweight belaying and
abseiling device is now
30% lighter than the
original ATC (Air Traffic
Controller) thanks to
improved construction and
cut outs in the sides.
The variable friction
modes allow a wide range
of rope diameters from
7.7 to 11mm and the high
friction mode is
especially useful in
desperate situations or
when belaying heavier
partners. The
stiff cable keeps the
ATC XP where it should be
and avoids rope tangling
making this slick device
completely intuitive to
use. 30% lighter than the
original High-friction
mode offers 3 times
greater hold and stopping
power than
regular-friction mode
Machined windows through
device for weight savings
Durable cable holds its
shape and resists getting
caught up between ropes
Hot-forged construction
Versatile design accepts
ropes from 7.7 to 11 mm
Availability: In Stock
£18.00
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£10.80
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£67.50
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£8.55
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£9.00
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£8.10
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£9.00
Available
-
The brilliant Wallnut
gives secure placements
even in difficult
situations and their
quality means that they
will do this time after
time, route after route.
When you are pumped and
scared the last thing you
need is to be fighting in
a basic, square nut that
wont seat properly or
worse, wont place at all
because the wire is too
floppy to allow an
accurate placement.
Wallnuts
instill confidence
meaning you can
concentrate on your
climbing. Their complex
3D shade is curved and
scalloped to allow a
variety of placement
options and bite
points...they just work
really well. The alloy
nut itself is held on a
fully swaged extremely
strong and durable wire
that is stiff enough to
aid placement yet
flexible enough not to
dislodge the nut when
climbing. A set of
Wallnuts, usually with
some double ups in the
small to medium sizes,
is the basis of any lead
climbers rack. All the
wallnuts are colour coded
for quick recognition and
the colours are
compatible with other
makes of nuts to avoid
confusion if you mix
brands. Classic shaped
alloy nuts on wire 11
sizes Lighter extruded
sizes 7–11 Colour coded
for easy recognition and
compatibility with other
brands
Availability: In Stock
£9.00
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£9.90
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£8.10
Available
-
The asymmetrical cross
section, flat sides and
end taper combine to
offer a variety of
placement options in
widening cracks where
cams may walk out. Made
from T-6 aluminium with
swaged galvanised steel
cables they are both
lightweight and durable.
These may not be the
latest and most
technologically advanced
piece of protection, but
when you are faced with a
flared crack which just
wont take a cam, or you
are looking for an
absolutely bomber piece
of gear, youll be glad
you racked up these bad
boys.
Availability: In Stock
£9.90
Denmark