The Arriba 2 GTX is a new model greatly enhanced to offer a much more comfortable fit and enhanced cushioning & support.   Using a new AKU last for a wider forefoot & narrower heel the Arriba 2 feels instantly comfortable straight out the box.   Comfort is further enhanced by the IMS 2 system, a 3D midsole cradles the foot providing stability & a layer of EVA foam on top of the midsole provides instant comfort. A further layer of moulded PU beneath the midsole takes care of impact forces enhancing wearer comfort. IMS really does make a massive difference to your comfort & support, your foot is held securely even under testing conditions reducing fatigue & stress. The uppers are made from a Suede & nylon 3D Airmesh fabric to provide durability & breathability & are backed with a Gore-Tex lining for complete waterproofing. Traction & security is provided by a unique Vibram sole unit which is both hard wearing & grippy in all conditions. A superb lightweight shoe with unique technologies & components providing superb comfort, stability & support. ...

The Arriba II Mid GTX is a new model offering greatly enhanced to offer a much more comfortable fit and enhanced cushioning & support.   Using a new AKU last for a wider forefoot & narrower heel the Arriba 2 feels instantly comfortable straight out the box.   Comfort is further enhanced by the IMS 2 system, a 3D midsole cradles the foot providing stability & a layer of EVA foam on top of the midsole provides instant comfort. A further layer of moulded PU beneath the midsole takes care of impact forces enhancing wearer comfort. IMS really does make a massive difference to your comfort & support, your foot is held securely even under testing conditions reducing fatigue & stress. The uppers are made from a Suede & nylon 3D Airmesh fabric to provide durability & breathability & are backed with a Gore-Tex lining for complete waterproofing. Traction & security is provided by a unique Vibram sole unit which is both hard wearing & grippy in all conditions. A superb lightweight mid shoe with unique technologies & components providing superb comfort, stability & support. ...

The key to the Ereras comfortable & supportive feel is the innovative PU injected Exoskeleton which wraps the heel area without compromising the lightweight & breathability of the upper. This makes the boot feel very stable & supportive without being heavy. The uppers are made from split leather & AKUs amazing Air 8000 fabric. Air 8000 is a lightweight nylon fabric that due to its clever construction breathes 11 times better than traditionally constructed fabric boots. Backed up by a full Gore-Tex bootie lining for complete waterproofing the Arera is ready to tackle all conditions.  Vibram have produced the unique Arera sole unit which is durable, lightweight & offers plenty of grip on mixed ground. The internal shape of the boot is dictated by the last, a solid form that the boot is built around & AKU have used an anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction.   Flex & stability is provided by the midsole, a nylon board that allows completely natural flexing & an intuitive walking action without being too soft or too stiff. PU injected Exoskeleton Air 8000 uppers Gore-Tex lining Vibram sole ...

The Fastalpina GTX is a well designed & proper walking & trekking shoe that has been designed to be used for longer walks & treks. The key to the Fastalpinas comfort & support is the ingenious IMS 3 system. IMS 3 combines the outersole, an exoskeleton support structure & a 3D anatomical fit midsole. The outsole is exclusive to AKU & is a lightweight deep lugged Vibram unit combining durability with traction & stability. Cushioning & support is provided by the internal PU & EVA midsole which then extends up & around the heel to provide additional support & pronation control. The IMS 3D midsole provides a natural rolling flex to the boot without it being too soft or too stiff.   The design of the midsole itself mimics the foot shape to cradle the foot in a natural position reducing fatigue & internal movement. The internal shape of the boot is dictated by the last, a solid form that the boot is built around, & AKU use a special anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction. AKU are one of very few manufacturers to make their boots with the last inside the shoe throughout the production process. Whilst this may take longer, & increase cost, it does ensure the shoe retains its shape integrity, resulting in a fit that remains true for the life of the shoe. To further enhance your comfort & security the lacing system uses rollers to allow an even & smooth lace pull eliminating tight spots. The uppers are a mixture of leather & synthetic materials to provide durability & breathability. The synthetic material is a 3D Air Mesh, an incredibly breathable material that helps to keep your feet cool, this is then fully Gore-Tex lined for complete waterproofness. All together the Fastalpina is a supremely comfortable & high performance walking & trekking shoe suitable for walking in varied terrain & for longer treks in the mountains. Custom Vibram sole unit Suede & 3D Air Mesh uppers Gore-Tex lined PU Exoskeleton IMS 3 support system ...

The Montagnard is a brand new mountaineering boot from AKU which features a fully insulated Gore-Tex comfort lining for true winter capabilities. The Montagnard is perfect for winter mountaineering & for those who work hard in the mountains in winter such as guides & rescue personnel. We would rate the Montagnard as a B2+ boot, its flexible enough for mountain walking & glacier travel, yet has enough stiffness to accept step in crampons for mixed climbing. Despite its heavy weight performance these fabulous boots have a lightweight construction & sensitive feel. Constructed using the highest quality 3mm silicone impregnated Perwanger leather with a special Gore-Tex insulated comfort lining these boots will be perfectly at home in the harshest of conditions & environments. Further insulation is provided by Primaloft inserts over the tongue & toe area which are more prone to ice & snow accumulations. The custom footbed features a special heat reflective material to reduce radiant heat loss from your feet. The key to the comfort & stability of AKU boots is their IMS system. Normally the midsole (the boots backbone) is made from a flat stiff board or plate, but IMS uses a 3D anatomically shaped carbon midsole that cradles the foot in a natural position reducing internal movement & encouraging a naturally relaxed foot. What this means is that your feet feel less tired as they are not constantly working to provide support, the IMS is doing all that. The modular sole unit of the Montagnard has been constructed using the new Exoskeleton which provides protection & stability without compromising the weight of the boot. The Exoskeleton is made up of a softer material to absorb impact shock & a more rigid material to provide stability, lateral retention & the perfect torsional rigidity. A Vibram Nepal outer sole has aggressive lugs for grip & security on loose ground & a dedicated climbing area for secure grip on rock. The Montagnard is designed with a higher ankle to provide full support & protection & features Flex zones to provide freedom of movement for long walk ins & trekking; an integrated microfibre gaiter keeps snow & debris out of the top of the boots. Lacing is controlled through steel roller eyelets that allow an even lace pull right form the toe to the ankle. Lace tension can be separated between ankle & lower foot with a locking cleat. A full rubber rand protects the uppers form abrasion & is thicker on the instep where most contact occurs. An insulated & high performance B2+ mountaineering boot. 3mm Perwanger leather uppers Vibram Nepal sole unit IMS 3 comfort & support Insulated Gore-Tex comfort lining Performance fit Exoskeleton support system ...

The Slope is an absolute classic boot, it has been around for years, proving that good design never goes out of fashion. The uppers are made from split leather & AKUs amazing Air 8000 fabric.   Air 8000 is a lightweight nylon fabric that due to its clever construction breathes 11 times better than traditionally constructed fabric boots. These amazingly breathable uppers are backed up by a full Gore-Tex bootie lining for complete waterproofing so the Slope GTX is ready to tackle all conditions. Grip & stability are provided by a Vibram sole unit which has an aggressive multi directional lugged pattern for outstanding grip on a variety of terrain. Comfort & cushioning is provided by the lightweight, & exclusive, dual density EVA midsole. Walking support is provided by a lightweight Texon & TPU lasting board that encourages a natural rolling action & flex point. The Slope is perfect for just about anything from daily use, light work & general hill walking & trekking. Spilt leather uppers Air 8000 breathable nylon fabric Waterproof Gore-Tex lining Vibram multi-directional sole unit Exclusive dual density EVA midsole Texon & TPU lasting board ...

This brand new boot from AKU is absolutely gorgeous, both to look at & to wear. Virtually all the components were sourced from Italian suppliers & the boots themselves were designed & hand made by AKU in their Montebelluna factory in northern Italy. They just ooze quality. The key to the comfort & stability of AKU boots is their IMS system. Normally the midsole (the boots backbone) is made from a flat stiff board or plate, but IMS uses a 3D anatomically shaped midsole that cradles the foot in a natural position reducing internal movement & encouraging a naturally relaxed foot. What this means is that your feet feel less tired as they are not constantly working to provide support, the IMS is doing all that. The sole unit of the Superalp has been constructed using the new Exoskeleton construction which provides protection & stability without compromising the weight of the boot. The Exoskeleton is made up of a softer material to absorb impact shock & a more rigid material to provide stability, lateral retention & the perfect torsional rigidity. A Vibram self-cleaning outer sole supplies oodles of grip on a loose ground & has a reinforced toe area for secure grip on rock, if you fancy a bit of scrambling. The Nubuk leather is supplied by an Italian tannery that guarantees a sustainable & environmentally friendly production process resulting in the best quality 2.6mm leather. These sublime leather uppers are then backed by a 3D Gore-Tex lining for complete waterproofing & breathability. Stretch zones have been built into the ankle area to allow full movement without compromising support. In fact your ankle is superbly protected & cossetted by padding which becomes apparent as you slide your foot in. A full rubber rand finishes off the uppers to provide abrasion resistance. An even lacing tension is guaranteed by the use of roller eyelets that allow a smooth lace pull from the toe to the ankle, & you can separate the upper & lower lacing tension with a 45 degree lace lock. I really cannot convey in words how fantastically comfortable these boots are, your feet feel completely relaxed & cosseted, yet secure & stable at all times. Nubuk leather uppers Gore-Tex lining Flex zones Padded ankle IMS midsole Exoskeleton support system Vibram sole unit     ...

This fabulous high quality boot is perfect for high treks & classic mountaineering. The lightweight construction & sensitive feel make it perfect for scrambling & crampon compatibility introduces winter capability. The Terrealte GTX is a brand new model from AKU & uses the new EXO-skeleton construction that provides superb stability & comfort with minimal weight. This gorgeous boot has been designed & produced in AKUs Italian factory & is perfect for work & play in the high mountains in all conditions. It is comfortable enough for long treks & technical adventures & has the strength & support to accept semi-automatic crampons for winter activities, a true all mountain boot. The key to the comfort & stability of AKU boots is their IMS system. Normally the midsole (the boots backbone) is made from a flat stiff board or plate, but IMS uses a 3D anatomically shaped carbon midsole that cradles the foot in a natural position reducing internal movement & encouraging a naturally relaxed foot. What this means is that your feet feel less tired as they are not constantly working to provide support, the IMS is doing all that. The modular sole unit of the Terrealte has been constructed using the new Exoskeleton construction which provides protection & stability without compromising the weight of the boot. The Exoskeleton is made up of a softer material to absorb impact shock & a more rigid material to provide stability, lateral retention & the perfect torsional rigidity. A Vibram Mulaz low profile outer sole has a dedicated climbing area for secure grip on rock with enough tread for trekking duties. Robust & high quality suede uppers combined with the superb Air 8000 technology provide support & very high levels of breathability. Air 8000 technology is used to laminate the Gore-Tex membrane with the uppers to provide breathability levels 11 times greater than traditionally constructed boots. Flex zones at the ankle provide freedom of movement for trekking without compromising support for more technical use & an integrated gaiter keeps snow & debris out of the boots. Lacing is controlled through steel roller eyelets that allow an even lace pull right form the toe to the ankle. Lace tension can be separated between ankle & lower foot with a locking cleat. A full rubber rand protects the uppers form abrasion & is thicker on the instep where most contact occurs. A brilliant & superbly comfortable B2 rated boot for all mountain adventures. Suede & Air 8000n uppers Vibram Mulaz sole unit IMS 3 comfort & support Gore-Tex lined Performance fit Exoskeleton support system ...

The key to the Transalpinas comfort & support is the ingenious IMS 3 system.  IMS 3 combines the outersole, an exoskeleton support structure & a 3D anatomical fit midsole. The outsole is exclusive to AKU & is a lightweight deep lugged Vibram unit combining durability with traction & stability. Cushioning & support is provided by the internal PU & EVA midsole which then extends up & around the heel to provide additional support & pronation control.   The IMS 3D midsole provides a natural rolling flex to the boot without it being too soft or too stiff.   The shape of the midsole itself mimics the natural foot shape to cradle the foot in a natural position reducing fatigue & internal movement. The internal shape of the boot is dictated by the last, a solid form that the boot is built around.  AKU use an anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction. The uppers are a mixture of leather & synthetic materials to provide durability & breathability.   The synthetic material is made from Air 8000, an incredibly breathable material that breathes 11 times better than traditionally made fabric boots.   Fully Gore-Tex lined for complete waterproofness. All together the Transalpina is a supremely comfortable & high performance trekking boot suitable for walking in varied terrain & for longer treks in the mountains. ...

The Transalpina is designed to be used for longer walks & treks & to reduce wearer fatigue & foot stress. The key to the Transalpinas comfort & support is the ingenious IMS 3 system. IMS 3 combines the outersole, an exoskeleton support structure & a 3D anatomical fit midsole. The outsole is exclusive to AKU & is a lightweight deep lugged Vibram unit combining durability with traction & stability. Cushioning & support is provided by the internal PU & EVA midsole which then extends up & around the heel to provide additional support & pronation control. The IMS 3D midsole provides a natural rolling flex to the boot without it being too soft or too stiff.   The design of the midsole itself mimics the foot shape to cradle the foot in a natural position reducing fatigue & internal movement. The internal shape of the boot is dictated by the last, a solid form that the boot is built around, & AKU use a special anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction. AKU are one of very few manufacturers to make their boots with the last inside the boot throughout the production process. Whilst this may take longer, & increase cost, it does ensure the boot retains its shape integrity, resulting in a fit that remains true for the life of the boot. To further enhance your comfort & security the lacing system uses rollers to allow an even & smooth lace pull eliminating tight spots. The uppers are a mixture of leather & synthetic materials to provide durability & breathability.   The synthetic material is made from Air 8000, an incredibly breathable material that breathes 11 times better than traditionally made fabric boots, & is fully Gore-Tex lined for complete waterproofness. All together the Transalpina is a supremely comfortable & high performance trekking boot suitable for walking in varied terrain & for longer treks in the mountains. Custom Vibram sole unit Suede & Air 8000 uppers Gore-Tex lined PU Exoskeleton IMS 3 support system ...