The key to the Ereras comfortable & supportive feel is the innovative PU injected Exoskeleton which wraps the heel area without compromising the lightweight & breathability of the upper. This makes the boot feel very stable & supportive without being heavy. The uppers are made from split leather & AKUs amazing Air 8000 fabric. Air 8000 is a lightweight nylon fabric that due to its clever construction breathes 11 times better than traditionally constructed fabric boots. Backed up by a full Gore-Tex bootie lining for complete waterproofing the Arera is ready to tackle all conditions.  Vibram have produced the unique Arera sole unit which is durable, lightweight & offers plenty of grip on mixed ground. The internal shape of the boot is dictated by the last, a solid form that the boot is built around & AKU have used an anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction.   Flex & stability is provided by the midsole, a nylon board that allows completely natural flexing & an intuitive walking action without being too soft or too stiff. PU injected Exoskeleton Air 8000 uppers Gore-Tex lining Vibram sole ...

The key to the Transalpinas comfort & support is the ingenious IMS 3 system.  IMS 3 combines the outersole, an exoskeleton support structure & a 3D anatomical fit midsole. The outsole is exclusive to AKU & is a lightweight deep lugged Vibram unit combining durability with traction & stability. Cushioning & support is provided by the internal PU & EVA midsole which then extends up & around the heel to provide additional support & pronation control.   The IMS 3D midsole provides a natural rolling flex to the boot without it being too soft or too stiff.   The shape of the midsole itself mimics the natural foot shape to cradle the foot in a natural position reducing fatigue & internal movement. The internal shape of the boot is dictated by the last, a solid form that the boot is built around.  AKU use an anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction. The uppers are a mixture of leather & synthetic materials to provide durability & breathability.   The synthetic material is made from Air 8000, an incredibly breathable material that breathes 11 times better than traditionally made fabric boots.   Fully Gore-Tex lined for complete waterproofness. All together the Transalpina is a supremely comfortable & high performance trekking boot suitable for walking in varied terrain & for longer treks in the mountains. ...

The Womens Tribute 2 GTX builds on its predecessors success with a new injection moulded PU midsole & Exoskeleton. This clever construction technique provides cushioning & support & extends up & around the heel to provide additional support & pronation control. The Tribute 2 GTX has genuine straight out of the box comfort & wearability. They are so light & easy to wear you just want to stick them on & go for a walk.   AKU are about the only manufacturer to keep the last (the solid form that dictates the boots shape) inside the boot throughout the whole production process. By doing this the Tribute memorizes its shape through the most critical stages of production. Whilst this may be a more costly operation it ensures the integrity of shape & ultimately your comfort. This process also a more accurate sizing as the boots don’t shrink when they cool off after the moulding process. A TPU lasting board provides structural support & a natural rolling walking action. Grip & support are provided by a deeply lugged Vibram sole unit with a positive heel brake to provide additional security when descending. Uppers are 2.0mm full grain leather backed up by a Gore-Tex membrane to provide a real belt & braces approach to keeping out the wet. However please take care of the leather with Nikwax products to keep it supple & in good condition.  Full grain leather uppers Gore-Tex lining PU Exoskeleton & midsole Vibram out sole ...

The uppers are made from split leather & AKUs amazing Air 8000 fabric.   Air 8000 is a lightweight nylon fabric that due to its clever construction breathes 11 times better than traditionally constructed fabric boots.   Backed up by a full Gore-Tex bootie lining for complete waterproofing the Slope GTX is ready to tackle all conditions.   Vibram have produced the sole unit, an aggressive multi directional lugged pattern offers outstanding grip on a variety of terrain.   Cushioning is provided by the lightweight exclusive dual density EVA midsole. Walking support is provided by a lightweight Texon & TPU lasting board that encourages a natural rolling action & flex point. The Slope then is perfect for just about anything from daily use, light work & general mountain walking & trekking. ...

The Mantis is the largest model of Alite chairs that we stock, it has an extremely comfortable sling with an extended back for some serious lounging. Four strong contact points provide a very stable platform, even on uneven ground & lift you slightly higher for a more natural seated position. Assembly is easy as the aluminium frame is all shock-corded so you can’t lose any of the sections & the ends of the frame & the corresponding seat pockets are colour coded. The feet are made from a soft compound, yet hard wearing, rubber for added traction on slippery surfaces. My first ever go was on a shiny wooden floor & I didn’t make a fool of myself! Four legs for maximum stability Extremely comfortable sling Packs down to fit inside your bag, tote, or trunk Super easy to assemble, colour coded for simplicity Stuff sack included with assembly instructions Patent pending innovative design ...

The Mayfly is made with a high grade 7000 series aluminium frame & a ripstop nylon seat with breathable mesh panels. The Mayfly is a low sitting chair with a front bar which adds stability, or when the front bar is removed the Mayfly can be used as a lightweight rocker. With the front bar fitted the Mayfly works best on more even ground, but when removed it will cope with just about any terrain.  Assembly is easy as the aluminium frame is all shock-corded so you can’t lose any of the sections & the ends of the frame & the corresponding seat pockets are colour coded.  The feet are made from a soft compound, yet hard wearing, rubber for added traction on slippery surfaces. My first ever go was on a shiny wooden floor & I didn’t make a fool of myself! The whole lot packs into a neat stuff sack measuring 30 x 12 x 12cm & weights only 635g 3-legged stable or 2-legged rocker Large sling for more comfort Durable for everyday use Packs down small to fit inside your bag, closet, or car Extremely easy to assemble, color coded for simplicity Patent pending innovative design ...

The Monarch is made with a high grade 7000 series aluminium frame & a ripstop nylon seat with breathable mesh panels. The Monarch is best described as a balance chair, in as much that it only has two points of contact with the ground. This enables the Monarch to be placed on virtually any surface, including uneven hillsides.  The Monarch is incredibly comfortable as it means that you can rock & move to the perfect sitting position, just keep your feet on the ground & lean back. Assembly is easy as the aluminium frame is all shock-corded so you can’t lose any of the sections & the ends of the frame & the corresponding seat pockets are colour coded. The feet are made from a soft compound, yet hard wearing, rubber for added traction on slippery surfaces. My first ever go was on a shiny wooden floor & I didn’t make a fool of myself! Innovative, 2-legged design for rocking Extremely comfortable sling Packs down to fit inside your bag, tote, or trunk Super easy to assemble, colour coded for simplicity Stuff sack included with assembly instructions Patent pending innovative design ...

The Altberg Desert Microlite is a well made ultra light weight desert boot. The boot provides excellent underfoot support & protection with enhanced shock absorption. A micro midsole combination gives some resistance to heat transfer from the ground. The heel & ankle are padded for comfort & protection
- other than this the boot is unlined to enhance maximum breathability & minimise moisture retention. The leather used to make these boots is 2.2mm whole butt suede & the padding around the ankle is made form Cambrelle. The boots weigh 680 grams with a leg height of 20cms.
...

Alt-berg Leder Gris Black is a mixture of 70% wax & 30% oil. It has been developed for everyday use in average UK conditions. The wax provides waterproofing, as it dries it remains on or just below the surface as the oil penetrates deeper into the leather to condition & main the leathers suppleness. Reducing the chances of the leather drying out & cracking. ...

The  Mens Sneeker Microlite is a high leg, ultra lightweight tabbing boot (630gms, size 9).  The boot has a non waterproof Cambrelle lining around the foot, heel & ankle.  The leg is unlined. The boot uses the Tri-flex 3 season midsole, which gives medium flex with excellent torsional resistance & support on moderate/rough terrain.  The upper is made from soft, supple, lightweight, water repellent Nappone leather – 1.8mm thickness. ...