The DMM  Dyneema slings are strong & lightweight & are an essential part of the modern climbers rack. This 11mm Dyneema quickdraw has been asymmetrically sewn & features a rubber tadpole captor to keep the rope biner secure.   The other end has a larger loop to allow the pro biner to move freely reducing the drag on your gear.  Dyneema is stronger, lighter & more abrasion resistant than Nylon & is less susceptible to UV degradation. Please note that the colour supplied may differ from the photo shown online. ...

The Aero  Quickdraw 12cm combines the robustness & functionality of the Aero carabiners with a tough 12cm/16mm  Nylon tape. This QD comes with a straight gate Aero for clipping gear & a bent gate for easy rope clipping. The Aero carabiners used in this quickdraw are the work horse of the DMM range, but dont think that they are a bit rough & ready, they are made with all the usual DMM precision & quality offering reliable performance. Hot forged & with a solid gate these tough biners are built to withstand the rigours of sport climbing & feature a clean keylock nose to prevent snagging when clipping bolts or more traditional protection   The Aero is perfectly capable of coping with all climbing disciplines from pumpy sport routes to gnarly trad mountain epics. Large gate opening Clean nose design to reduce snagging Deep gate bend for easy rope clipping ...

The Aero  Quickdraw 12cm 5 Pack combines the robustness & functionality of the Aero carabiners with a tough 12cm/16mm  Nylon tape. This QD comes with a straight gate Aero for clipping gear & a bent gate for easy rope clipping. The Aero carabiners used in this quickdraw are the work horse of the DMM range, but dont think that they are a bit rough & ready, they are made with all the usual DMM precision & quality offering reliable performance. Hot forged & with a solid gate these tough biners are built to withstand the rigours of sport climbing & feature a clean keylock nose to prevent snagging when clipping bolts or more traditional protection   The Aero is perfectly capable of coping with all climbing disciplines from pumpy sport routes to gnarly trad mountain epics. 5 Pack Large gate opening Clean nose design to reduce snagging Deep gate bend for easy rope clipping ...

The Aero  Quickdraw 18cm combines the robustness & functionality of the Aero carabiners with a tough 18cm/16mm  Nylon tape. This QD comes with a straight gate Aero for clipping gear & a bent gate for easy rope clipping. The Aero carabiners used in this quickdraw are the work horse of the DMM range, but dont think that they are a bit rough & ready, they are made with all the usual DMM precision & quality offering reliable performance. Hot forged & with a solid gate these tough biners are built to withstand the rigours of sport climbing & feature a clean keylock nose to prevent snagging when clipping bolts or more traditional protection   The Aero is perfectly capable of coping with all climbing disciplines from pumpy sport routes to gnarly trad mountain epics. Large gate opening Clean nose design to reduce snagging Deep gate bend for easy rope clipping ...

The Aero is a high quality, hot-forged solid gate carabiner with a strong gate open strength for extra safety. It features a shrouded keylock nose to reduce snagging when clipping & a rope groove to help direct any loads against the spine. This bent gate version is designed for the rope end of a quickdraw.   The carabiner is a good size for all-round use & has a nice wide gate opening, so that even clipping thick webbing is easy. The gate itself contains a deep bend that rolls into the nose to make clipping very easy
- even when you are pumped stupid miles above the last gear; at the same time the gate/nose intersection has been carefully designed so that the chances of the rope unclipping itself are minimised.  DMM also use a relatively strong spring pressure both to reduce the chances of gate flutter happening & also to reduce the chances of the rope unclipping itself when backclipped.
...

A good value, core offset D locking carabiner with a keylock nose that is snag free & sets the new standard for entry level ...

The Aero is a high quality, hot-forged solid gate carabiner with a strong gate open strength for extra safety. It features a shrouded keylock nose to reduce snagging when clipping bolts or traditional protection & a rope groove to help direct any loads against the spine. This straight gate version is designed for the bolt/pro clipping end of a quickdraw.   The carabiner is a good size for all-round use & has a nice wide gate opening, so that even clipping thick webbing is easy. ...

The DMM Alloy Offset is the development of the original HB offset designed & made by the legendary Hugh Banner who founded HB Climbing Equipment. Hugh realised that conventional nuts don’t sit well in flared cracks, so he designed the Offset. HB Climbing Equipment closed in 2005, so DMM have taken up the mantle & produced a new version of the old classic. The DMM Offset is forged from a solid bar of aluminium alloy to produce the asymmetrical shape with side recesses to provide different & varied placement options. The wire has been fully recessed into the head to make it smoother, safer & stronger. On the two largest sizes the sides have even been drilled to reduce weight. Colour coded to compliment the rest of the DMM protection range & designed to follow on from where the Brass Offsets end. When you are struggling to get your Wallnuts to sit nicely in uneven & flared cracks, shove in an Offset & relax. ...

The DMM Alloy Offset is the development of the original HB offset designed & made by the legendary Hugh Banner who founded HB Climbing Equipment. Hugh realised that conventional nuts don’t sit well in flared cracks, so he designed the Offset. HB Climbing Equipment closed in 2005, so DMM have taken up the mantle & produced a new version of the old classic. The DMM Offset is forged from a solid bar of aluminium alloy to produce the asymmetrical shape with side recesses to provide different & varied placement options. The wire has been fully recessed into the head to make it smoother, safer & stronger. On the two largest sizes the sides have even been drilled to reduce weight. Colour coded to compliment the rest of the DMM protection range & designed to follow on from where the Brass Offsets end. When you are struggling to get your Wallnuts to sit nicely in uneven & flared cracks, shove in an Offset & relax.     ...