The Petzl Fixed Pulley is lightweight, compact, & quick to install on the rope. It offers a good balance between weight & strength. Lightweight, compact pulley Designed for hauling systems & deviations Fixed side plates allow quick installation & coupling with a rope clamp Sheave mounted on self-lubricating bushings for efficiency ...

This brilliant device works on all dynamic single ropes from 8.9 – 11mm, but is optimised for 9.4 – 10.3mm ropes.  The unique design feature of the Grigri is its assisted braking, giving confidence to beginners & experienced climbers alike.  The Grigri 2 has a new design that improves control on descents, eliminating rope jam & sudden release to allow a very gradual release of the rope especially when abseiling or lowering a partner.  The Grigri 2 is 25% smaller & 20% lighter than the original.    Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots & pinches the rope, increasing the braking action until the rope stops sliding The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope & the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling The GRIGRI 2 is compact & ultra-light at 185 g (25 % smaller & 20 % lighter than the GRIGRI) Built with a stainless steel friction plate & cam to ensure a long life for the product For 8.9 to 11 mm single ropes (optimised for 9.4 mm to 10.3 mm ropes) Diagrams for rope installation engraved on belay device (interior & exterior) ...

This brilliant device works on all dynamic single ropes from 8.9 – 11mm, but is optimised for 9.4 – 10.3mm ropes.  The unique design feature of the Grigri is its assisted braking, giving confidence to beginners & experienced climbers alike.  The Grigri 2 has a new design that improves control on descents, eliminating rope jam & sudden release to allow a very gradual release of the rope especially when abseiling or lowering a partner.  The Grigri 2 is 25% smaller & 20% lighter than the original.    Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots & pinches the rope, increasing the braking action until the rope stops sliding The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope & the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling The GRIGRI 2 is compact & ultra-light at 185 g (25 % smaller & 20 % lighter than the GRIGRI) Built with a stainless steel friction plate & cam to ensure a long life for the product For 8.9 to 11 mm single ropes (optimised for 9.4 mm to 10.3 mm ropes) Diagrams for rope installation engraved on belay device (interior & exterior) ...

The Petzl Gym Harness is a simple, adjustable harness. Usually used for group programs or beginners the Gym Harness is one size fits all & easy to adjust. Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn, & allow the harness to be put on when wearing skis or crampons Double Back buckles for easy adjustability They help prevent incorrect manipulation. Single Dyneema-reinforced tie-in point for increased durability Detachable elastic leg loop straps Leg loops & waistbelt are color coded to facilitate donning ...

Petzl Myo RXP Grey.  A truly versatile headtorch for all activities & events that can be programmed to optimise power output & lighting modes. There are three lighting modes on offer, each with lumen outputs between 13 & 141.   You can programme which mode comes on first & how much light it chucks out.   You can even programme the strobe mode to be slow,  fast or SOS.   There is also a boost switch which bumps up the lumen output to 205 for those instances when you need all the light you can get.   On the front of the lens is a flip up diffuser which changes the light pattern from a flood to a spot.   With all this light output you will need to know how your batteries are coping, so the Myo RXP has a battery level indicator which warns when the batteries are 70% & then 90% depleted.   The 3 AA batteries sit on the back of the head & you can use lithium batteries to optimize performance in the cold.   An extra over the head elastic strap is included for when you need extra stability. Fully programmable lighting modes
- min power, max power & strobe Three lighting modes each with ten power settings 3 x AA batteries Compatable with alkaline, lithium, re-chargeable Ni-MH & re-chargeable Ni-Cd batteries. IPX 4 watertight Wide angle or spot focus beam patterns Reliable & durable construction
...

The Petzl Ouistiti is the classic kids full body harness. Designed with parents in mind when they put the adjustment buckles at the back of the harness, well out of the reach of small hands. Perfect first climbing harness for your child. Specifications: For children weighing less than 30kg (estimated age range 4-9 years) Two Double Back buckles adjust in the back of the harness to keep them out of the reach of the wearer Bicolour webbing (black inside, colours outside) makes fitting easier Leg loops to fit circumference less than 51 cm Torso length range 45
- 60 cm. 
...

An incredibly lightweight & versatile belay device that suits just about any rope & climbing situation.   The V-shaped friction channels give smooth & effective braking from thin to thick ropes & the asymmetrically grooved sidewalls increase braking power during a fall or when abseiling yet still allow smooth rope slide during belaying. With the Reverso in normal mode you can belay the leader, one or two seconding climbers & also abseil.   In Reverso mode (or remote belay) you bring up one or two second climbers in comfort & safety on multi pitch routes then simply switch to normal mode on the changeover to belay the leader. The smaller karabiner hole allows for easy for & smooth release of rope when heavily loaded in Reverso mode. The Reverso is very kind to your rope, it will not kink or twist even when using two different diameter ropes & it separates the strands nicely when belaying & abseiling. Ultra-light design:
- minimalist construction
- hot-forged aluminum
- Weight: 59 g A single device for all rope types:
- effective braking on half & twin ropes ≥ 7.5 mm
- effective braking on single ropes ≥ 8.9 mm
- can belay the leader, one or two seconding climbers & can be used for rappelling
- independent & simultaneous belaying of one or two seconding climbers in Reverso mode
- quick changeovers from Reverso mode to belaying the leader when climbing multi-pitch routes V-shaped friction channels:
- increased friction on thin ropes
- friction is adapted for larger diameter ropes
- increases the locking pressure on the ropes in Reverso mode Asymmetrically grooved sidewalls:
- increased braking power during a leader or top rope fall or while rappelling
- rope slides smoothly through device when taking up slack Carabiner hole allows the loaded device in Reverso mode to be easily & gradually released with only a carabiner Rope friendly, allows for smooth belaying & rope handling:
- will not kink the ropes regardless of the mode used
- separates the two strands of rope when belaying & rappelling Intuitive use:
- Reverso mode aluminum attachment point is easy to identify
- keeper cable keeps the device from moving up the rope when belaying & reduces chances of losing the device
- usage diagrams (standard belay & Reverso modes) engraved on device

















...

An incredibly lightweight & versatile belay device that suits just about any rope & climbing situation.  The V-shaped friction channels give smooth & effective braking from thin to thick ropes & the asymmetrically grooved sidewalls increase braking power during a fall or when abseiling yet still allow smooth rope slide during belaying. With the Reverso in normal mode you can belay the leader, one or two seconding climbers & also abseil.  In Reverso mode (or remote belay) you bring up one or two second climbers in comfort & safety on multi pitch routes then simply switch to normal mode on the changeover to belay the leader. The smaller karabiner hole allows for easy for & smooth release of rope when heavily loaded in Reverso mode. The Reverso is very kind to your rope, it will not kink or twist even when using two different diameter ropes & it separates the strands nicely when belaying & abseiling. Ultra-light design:
- minimalist construction
- hot-forged aluminium
- Weight: 59 g A single device for all rope types:
- effective braking on half & twin ropes ≥ 7.5 mm
- effective braking on single ropes ≥ 8.9 mm
- can belay the leader, one or two seconding climbers & can be used for rappelling
- independent & simultaneous belaying of one or two seconding climbers in Reverso mode
- quick changeovers from Reverso mode to belaying the leader when climbing multi-pitch routes V-shaped friction channels:
- increased friction on thin ropes
- friction is adapted for larger diameter ropes
- increases the locking pressure on the ropes in Reverso mode Asymmetrically grooved sidewalls:
- increased braking power during a leader or top rope fall or while rappelling
- rope slides smoothly through device when taking up slack Karabiner hole allows the loaded device in Reverso mode to be easily & gradually released with only a karabiner Rope friendly, allows for smooth belaying & rope handling:
- will not kink the ropes regardless of the mode used
- separates the two strands of rope when belaying & rappelling Intuitive use:
- Reverso mode aluminium attachment point is easy to identify
- keeper cable keeps the device from moving up the rope when belaying & reduces chances of losing the device
- usage diagrams (standard belay & Reverso modes) engraved on device

















...

The new Endoframe waist & leg loop construction splits the internal webbing to improve load distribution & comfort.   The waist belt has been re-shaped, wider at the sides & narrower at the back to put padding exactly where it is needed.   Buckles have been enhanced & lightened & the two front gear loops are rigid for trad racks whilst the rear ones are flexible as not to interfere with packs.   All tie in points, which are susceptible to intense wear, have been reinforced with dyneema. A superb lightweight & comfortable climbing harness. Endo Frame construction guarantees excellent weight distribution for highest comfort: ?- waistbelt & leg loops with doubled straps?
- waistbelt wider on the sides? Specific stitching on the waistbelt limit hard points & chafing? Double Back  Light buckle allows quick & easy adjustment of the waistbelt? Dyneema tie-in points for excellent resistance to rope friction? Elastic leg loops remain permanently adjusted without restricting movement Four equipment loops: two rigid ones in front for quick & easy access to equipment & two flexible ones in the rear to avoid creating pressure points with a backpack? Two slots for CARITOOL tool holder Rear loop for haul rope? Detachable elastic leg loop straps
...