Power Traveller have come up with a compact & practical solution to providing power to your outdoor tech when in remote places away from power sources. The Solarmonkey Adventurer combines a powerful solar panel with a built in 2500m Ah lithium polymer battery so you can charge your devices directly from the power of the sun during the day, & then utilise the stored power in the battery at night. With good sunlight the panel will completely charge the internal battery in about 8
- 12 hours, which is pretty damn quick! To access the power simply plug your device into the USB (Universal Serial Bus) port & the auto-load self sensing switching technology will optimise the charging parameters required; basically it knows how much power & for how long each device needs. MPPT (Maximum Power Point Tracker) technology allows the panels to carry on charging in low light conditions, & when the sun goes down the internal battery will keep your device powered all night. The Solarmonkey Adventurer can simultaneously charge the internal battery & your device via the USB (Universal Serial Bus) port, which is easily accessed through a port in the robust travel case. This clever bit of kit has been designed for the rigours of outdoor life, the panels are water resistant, the battery is thermally insulated giving an operating range of -10ºC to 90º & your devices are protected by short circuit, overload & low voltage protection. All this clever technology is protected by a robust storage case that can be clipped to your pack to maximise daylight charging. The Solarmonkey  Adventurer is designed to work with: H&-held Cameras/ Action Cameras iPads/ Tablets PDAs iPhones/ Smart Phones Mobile Phone iPods/MP3/MP4 PSP/H&-held/ Games Consoles Sat-Navs/GPS Head Torch Number of charges: iPad/tablet
- 25% iPhone/smartphone 1
- 2 times GPS 1
- 2 times iPod/MP3 player 2
- 6 times Mobile phone 2
- 3 times What you get in the box Solarmonkey  Adventurer portable charger Mobile connector tips USB (Universal Serial Bus) connection cable Monkeytail USB (Universal Serial Bus) to Apple sync/charging cable (not lightning connector) Carabiner Protective storage Pouch Connector tips for: Nokia Blackberry HTC Sony Ericsson Samsung LG Motorola    





...

Buy this for 1p!!! When you have a Powergorilla or Minigorilla in your basket. While stocks last!!! The Spidermonkey is a sleek, compact hub compatible with all your devices that can be recharged via USB (Universal Serial Bus). The first two at the top of the unit are specifically for your Apple devices such as iPad, iPhone or iPod, as they feature self-sensing technology which means they automatically detect which device is attached & change the charging parameters accordingly. The third port has been designed primarily for Samsung, iPhone & HTC smartphones whilst the fourth port is primarily for Nokia devices & 5V devices with a low power draw.   Port 4 is not suitable for iPhones.  The Spidermonkey has three input options;
- via 5V AC transformer socket
- via micro USB (Universal Serial Bus) socket
- via 5V-30V socket Please Note: It Is prohibited to connect a 9V DC-in & a 5V DC-in simultaneously as all inputs are in parallel connection & could damage your devices Ready to use straight out of the box, we have included a universal AC mains charger which works in over 150 countries worldwide, but there are several other charging options. You can power the Spidermonkey via our gorilla range of chargers through the 5V-30V socket or via the Powermonkey extreme through the 5V AC socket. Charging via the Powergorilla means that you can use the gorillas multi-voltage settings to increase the power to the USB (Universal Serial Bus) sockets dependent on your needs. The Spidermonkey can also be powered from your computers USB (Universal Serial Bus) port, making it the perfect desktop product for those needing to keep gadgets charged throughout the day. Housed in a tough, aluminium shell that keeps the internals of the Spidermonkey cool, the product has a 4-light display to show individually when all 4 USB (Universal Serial Bus) ports are working & gadgets can be charged. H&-held Cameras/ Action Cameras iPads/ Tablets iPhones/ Smart Phones Mobile Phone iPods/MP3/MP4 PSP/H&-held/ Games Consoles Sat-Navs/GPS Head Torches H&-held Cameras/ Action Cameras Sat-Navs/GPS Head Torches    


...

An ingenious folding device which clips to the bottom of most gas cartridges to provide extra stability; it is particularly useful when using tall stoves systems. Simply unfold the footrest & clip it directly to the base of your gas canister, the clever clip system will fit most widely available screw on cartridges. ...

This Primus windshield features a sprung construction that allows it to clip directly onto virtually all self sealing gas canisters. The windscreen not only screens the wind, but also improves your stoves efficiency by directing heat up the sides of the pot, so you use less fuel, so you dont need to carry as much, so your pack is lighter. When your done cooking the windscreen can be stored over the top of the canister. An awful lot of design genius has gone into something so simple. ...

A tough 400ml leak/spill proof mug that will keep your beverage of choice hot or cold for hours.   Made from stainless steel with a double wall insulated construction & then powder coated to give it a nice grippy non-slip finish. The easy to use click & pour lid system means your drink wont end up in your lap & the tapered design fits just about all cup holders. We have tried several similar products & have stuck with this one; why?   Because it just works! Stainless Steel construction Powder coated for increased grip & durability Silicone sealed click & pour lid system Will fit most cup holders   ...

This brilliant tiny little featherweight stove is capable of punching well above its weight thanks to the superbly designed pan supports & clever ignition system. It is perfectly capable of handling large heavy pans despite its miniscule weight of only 82 grams. The integrated Piezo ignition system does away with the need to carry lighters or matches & works in all conditions. Strong pan supports Tiny pack size Minimal weight Piezo ignition system Nylon storage bag ...

As you would expect from these Swedish kit junkies, the finish & quality of this flask is exceptional. The outside of this stainless steel flask is powder coated to give it a grippy & durable finish. The compact design holds 0.25 litres of liquid & the double walled & silver lined vacuum will keep liquids hot (95ºC) for 5 hours, reducing to 30ºC after 24 hours. This versatile flask will keep ice cold drinks chilled for up to 24 hours at below 20º. This flask comes with a standard screw in stopper & a push button opening stopper. The push button stopper, as the name implies, opens with a push of a button to allow you to pour without letting out any heat, the standard stopper has grooves to pour once it’s been unscrewed a bit. Trekitt top tip: Prime the flask before pouring your drink. For hot drinks fill with hot water (95ºC) & let stand for 5 minutes before filling, & for cold drinks fill with iced water & let stand for 5 minutes before filling. Stainless Steel construction Double wall & silver lined vacuum Keeps drinks hot or cold Powder coated Supplied with two stopper Lid acts as a mug ...

As you would expect from these Swedish kit junkies, the finish & quality of this lunch jug is exceptional. The outside of this stainless steel flask is powder coated to give it a grippy & durable finish. The compact design holds 0.5 litres of food & the double walled & silver lined vacuum will keep hot food at 95ºC for 5 hours, reducing to 25ºC after 24 hours. This versatile flask will keep ice cold food & drinks chilled for up to 24 hours at below 20º. The wide opening makes filling easy so you can always have your favourite grub wherever you are, & its a breeze to wash out afterwards. Trekitt top tip: Prime the lunch jug before filling with your grub. For hot food fill with hot water (95ºC) & let stand for 5 minutes before filling, & for cold food fill with iced water & let stand for 5 minutes before filling. Stainless Steel construction Double wall & silver lined vacuum Keeps food hot or cold Powder coated Wide opening ...

The fully adjustable Adjama harness is designed for mountaineering & winter climbing where adjustable leg loops are a must.   However it is also perfectly suitable for trad & sport climbs. The new Endoframe waist & leg loop construction splits the internal webbing to improve load distribution & comfort.   The waist belt has been re-shaped, wider at the sides & narrower at the back to put padding exactly where it is needed.   Buckles have been enhanced & lightened & the two front gear loops are rigid for trad racks whilst the rear ones are flexible as not to interfere with packs.   All tie in points, which are susceptible to intense wear, have been reinforced with dyneema. All in all a brilliant all round harness. ...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...