The Soto  Muka 1000ml  Fuel Bottle.  This fuel bottle has been specifically designed to be used with the Soto  Muka stove. The  Muka  Fuel Bottles have a wider opening for easier pouring, cleaning & pump insertion.  The maximum amount of fuel that can be carried in this bottle is 480ml due to the room needed for the pump to pressurise the container.   ...

Soto Muka  Generator Unit. This is probably the most important part of the stove as it atomises the fuel before it is ignited (cool fact; Muka is Japanese for atmoiser.) This is why the Muka stove doesnt need to be primed like other, more traditional multi-fuel stoves. Soto testing has revealed that Muka stove performance will be reduced after continuous burning of 20 litres of fuel, so about 40 x 700ml bottles. That looks like a stupid bit of Maths but remember, the 700ml bottle holds 480ml of fuel. If flame output seems weak then replace the generator tube. ...

Soto maintenance kit for Muka stove. Just about everything you need to keep your pride & joy in tip top condition.
Includes::
...

The Soto Muka Stove with 700ml Bottle. This is a non-priming, no soot build up, low maintenance liquid-fuel stove. Great for when transporting gas cannisters is out of the question. The Soto Muka runs on kerosene & unleaded petrol. The pump has an emergency shut of button & a relatively long & flexible tube compared to other liquid-fuel stoves. It also has a cool Air setting on the control dial, so when you are done cooking, flick it over to Air; this releases all the air in the fuel bottle, the flame is extinguished and the fuel line is emptied all at the same time, reducing fuel residues leaking all over your kit.  On the side of the pump there is a pressure indicator so you know when the fuel bottle is at the optimum pressure which is indicated by a red line. Once lit, the stove only takes 10 seconds for the flame to stabilise and you are ready to cook. One of the most important parts on the Muka Stove is the  Muka  Generator Unit (That little pipe the runs over the top of the burner head). This part of the stove as it atomises the fuel before it is ignited (cool fact;  Muka is Japanese for atmoiser.) This is why the  Muka stove doesnt need to be primed like other, more traditional multi-fuel stoves. Soto testing has revealed that  Muka stove performance will be reduced after continuous burning of 20 litres of fuel, so about 40 x 700ml bottles. That looks like a stupid bit of  Maths but remember, the 700ml bottle holds 480ml of fuel. If flame output seems weak then replace the generator tube. The Soto  Muka 700ml  Fuel Bottle.  This fuel bottle has been specifically designed to be used with the Soto  Muka stove. The  Muka  Fuel Bottles have a wider opening for easier pouring, cleaning & pump insertion. The maximum amount of fuel that can be carried in this bottle is 480ml due to the room needed for the pump to pressurise the container. Uses Kerosene or unleaded petrol Comes with 700ml fuel bottle Muka  Generator atomises the liquid fuel prior to burning 10 seconds for flame to stabilise No priming wick No soot build-up Low maintenance & easy to maintain ...

Turn just about any screw top drinks bottle into a hands free hydration system with this fiendishly simple gizmo! The Convertube comes with four different adaptors, a flexible hose & the very excellent Helix bite valve.  The Helix valve has a 360º cylindrical valve with a soft bite that eliminates the need to get the valve in the right position fro drinking, just shove it in & hydrate! To stop annoying dripping the valve features a sprung retreat mechanism which is leak proof even under pressure, & the whole thing can be locked off by simply twisting. The Helix valve is supplied with a Dirt Shield to protect the bite valve from dust & dirt. Set on a angle the Helix valve is always readily placed for easy drinking. The Convertube works brilliantly with the Sawyer Mini Filter to create a world-wide versatile in line water purification system. ...

The Helix valve has a 360º cylindrical valve with a soft bite that eliminates the need to get the valve in the right position fro drinking, just shove it in & hydrate! To stop annoying dripping the valve features a sprung retreat mechanism which is leak proof even under pressure, & the whole thing can be locked off by simply twisting. The Helix valve is supplied with a Dirt Shield to protect the bite valve from dust & dirt. Set on a angle the Helix valve is always readily placed for easy drinking. Cylindrical shape requires no special mouth orientation. Bite valve
- Unique mechanism delivers full flow with just a soft bite. Retreat spring mechanism
- Will not leak even under pressure or with prolonged use. Build-in bayonet style shut off. Omni directional operation. Integral lock
- Integrated twist shut-off. Long wearing design. Dirt Shield – Valve cover Angled valve


...

It can be a real pain getting a standard bladder out of a pack to re-fill when the hose is threaded through the hydration port & shoulder straps. With Source Quick Connect you can simply detach the bladder from the hose, even when its partially full, to make re-filling much easier.  To convert your standard bladder hose to SQC follow these simple steps: Cut the tube 3cm from the bottom Attach the SQC female connector to the short tube that is still attached to the bladder Attach the SQC male connector to the long tube with the bite valve Click the parts together  ...

This handy hydration pack features the superb Widepac 1.5 litre bladder to provide hydration for all your activities. Made ...