This brand new boot from AKU is absolutely gorgeous, both to look at & to wear. Virtually all the components were sourced from Italian suppliers & the boots themselves were designed & hand made by AKU in their Montebelluna factory in northern Italy. They just ooze quality. The key to the comfort & stability of AKU boots is their IMS system. Normally the midsole (the boots backbone) is made from a flat stiff board or plate, but IMS uses a 3D anatomically shaped midsole that cradles the foot in a natural position reducing internal movement & encouraging a naturally relaxed foot. What this means is that your feet feel less tired as they are not constantly working to provide support, the IMS is doing all that. The sole unit of the Superalp has been constructed using the new Exoskeleton construction which provides protection & stability without compromising the weight of the boot. The Exoskeleton is made up of a softer material to absorb impact shock & a more rigid material to provide stability, lateral retention & the perfect torsional rigidity. A Vibram self-cleaning outer sole supplies oodles of grip on a loose ground & has a reinforced toe area for secure grip on rock, if you fancy a bit of scrambling. The Nubuk leather is supplied by an Italian tannery that guarantees a sustainable & environmentally friendly production process resulting in the best quality 2.6mm leather. These sublime leather uppers are then backed by a 3D Gore-Tex lining for complete waterproofing & breathability. Stretch zones have been built into the ankle area to allow full movement without compromising support. In fact your ankle is superbly protected & cossetted by padding which becomes apparent as you slide your foot in. A full rubber rand finishes off the uppers to provide abrasion resistance. An even lacing tension is guaranteed by the use of roller eyelets that allow a smooth lace pull from the toe to the ankle, & you can separate the upper & lower lacing tension with a 45 degree lace lock. I really cannot convey in words how fantastically comfortable these boots are, your feet feel completely relaxed & cosseted, yet secure & stable at all times. Nubuk leather uppers Gore-Tex lining Flex zones Padded ankle IMS midsole Exoskeleton support system Vibram sole unit     ...

This fabulous high quality boot is perfect for high treks & classic mountaineering. The lightweight construction & sensitive feel make it perfect for scrambling & crampon compatibility introduces winter capability. The Terrealte GTX is a brand new model from AKU & uses the new EXO-skeleton construction that provides superb stability & comfort with minimal weight. This gorgeous boot has been designed & produced in AKUs Italian factory & is perfect for work & play in the high mountains in all conditions. It is comfortable enough for long treks & technical adventures & has the strength & support to accept semi-automatic crampons for winter activities, a true all mountain boot. The key to the comfort & stability of AKU boots is their IMS system. Normally the midsole (the boots backbone) is made from a flat stiff board or plate, but IMS uses a 3D anatomically shaped carbon midsole that cradles the foot in a natural position reducing internal movement & encouraging a naturally relaxed foot. What this means is that your feet feel less tired as they are not constantly working to provide support, the IMS is doing all that. The modular sole unit of the Terrealte has been constructed using the new Exoskeleton construction which provides protection & stability without compromising the weight of the boot. The Exoskeleton is made up of a softer material to absorb impact shock & a more rigid material to provide stability, lateral retention & the perfect torsional rigidity. A Vibram Mulaz low profile outer sole has a dedicated climbing area for secure grip on rock with enough tread for trekking duties. Robust & high quality suede uppers combined with the superb Air 8000 technology provide support & very high levels of breathability. Air 8000 technology is used to laminate the Gore-Tex membrane with the uppers to provide breathability levels 11 times greater than traditionally constructed boots. Flex zones at the ankle provide freedom of movement for trekking without compromising support for more technical use & an integrated gaiter keeps snow & debris out of the boots. Lacing is controlled through steel roller eyelets that allow an even lace pull right form the toe to the ankle. Lace tension can be separated between ankle & lower foot with a locking cleat. A full rubber rand protects the uppers form abrasion & is thicker on the instep where most contact occurs. A brilliant & superbly comfortable B2 rated boot for all mountain adventures. Suede & Air 8000n uppers Vibram Mulaz sole unit IMS 3 comfort & support Gore-Tex lined Performance fit Exoskeleton support system ...

The key to the Transalpinas comfort & support is the ingenious IMS 3 system.  IMS 3 combines the outersole, an exoskeleton support structure & a 3D anatomical fit midsole. The outsole is exclusive to AKU & is a lightweight deep lugged Vibram unit combining durability with traction & stability. Cushioning & support is provided by the internal PU & EVA midsole which then extends up & around the heel to provide additional support & pronation control.   The IMS 3D midsole provides a natural rolling flex to the boot without it being too soft or too stiff.   The shape of the midsole itself mimics the natural foot shape to cradle the foot in a natural position reducing fatigue & internal movement. The internal shape of the boot is dictated by the last, a solid form that the boot is built around.  AKU use an anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction. The uppers are a mixture of leather & synthetic materials to provide durability & breathability.   The synthetic material is made from Air 8000, an incredibly breathable material that breathes 11 times better than traditionally made fabric boots.   Fully Gore-Tex lined for complete waterproofness. All together the Transalpina is a supremely comfortable & high performance trekking boot suitable for walking in varied terrain & for longer treks in the mountains. ...

The Transalpina is designed to be used for longer walks & treks & to reduce wearer fatigue & foot stress. The key to the Transalpinas comfort & support is the ingenious IMS 3 system. IMS 3 combines the outersole, an exoskeleton support structure & a 3D anatomical fit midsole. The outsole is exclusive to AKU & is a lightweight deep lugged Vibram unit combining durability with traction & stability. Cushioning & support is provided by the internal PU & EVA midsole which then extends up & around the heel to provide additional support & pronation control. The IMS 3D midsole provides a natural rolling flex to the boot without it being too soft or too stiff.   The design of the midsole itself mimics the foot shape to cradle the foot in a natural position reducing fatigue & internal movement. The internal shape of the boot is dictated by the last, a solid form that the boot is built around, & AKU use a special anatomical last which gives room around the metatarsal heads  (toe joints) & control & support in the heel area minimising slippage & friction. AKU are one of very few manufacturers to make their boots with the last inside the boot throughout the production process. Whilst this may take longer, & increase cost, it does ensure the boot retains its shape integrity, resulting in a fit that remains true for the life of the boot. To further enhance your comfort & security the lacing system uses rollers to allow an even & smooth lace pull eliminating tight spots. The uppers are a mixture of leather & synthetic materials to provide durability & breathability.   The synthetic material is made from Air 8000, an incredibly breathable material that breathes 11 times better than traditionally made fabric boots, & is fully Gore-Tex lined for complete waterproofness. All together the Transalpina is a supremely comfortable & high performance trekking boot suitable for walking in varied terrain & for longer treks in the mountains. Custom Vibram sole unit Suede & Air 8000 uppers Gore-Tex lined PU Exoskeleton IMS 3 support system ...

The Tribute 2 GTX builds on its predecessors success with a new injection moulded PU midsole & Exoskeleton. This clever construction technique provides cushioning & support & extends up & around the heel to provide additional support & pronation control. The Tribute 2 GTX has genuine straight out of the box comfort & wearability. They are so light & easy to wear you just want to stick them on & go for a walk.   AKU are about the only manufacturer to keep the last (the solid form that dictates the boots shape) inside the boot throughout the whole production process. By doing this the Tribute memorizes its shape through the most critical stages of production. Whilst this may be a more costly operation it ensures the integrity of shape & ultimately your comfort. This process also a more accurate sizing as the boots don’t shrink when they cool off after the moulding process. A TPU lasting board provides structural support & a natural rolling walking action. Grip & support are provided by a deeply lugged Vibram sole unit with a positive heel brake to provide additional security when descending. Uppers are 2.0mm full grain leather backed up by a Gore-Tex membrane to provide a real belt & braces approach to keeping out the wet. However please take care of the leather with Nikwax products to keep it supple & in good condition.  Full grain leather uppers Gore-Tex lining PU Exoskeleton & midsole Vibram out sole ...

The Navy Seal Spider is built around a technical last to provide a superb sensitive feel making it perfect for rapid movements ...

AKU Pilgrim DS Black.   Exclusive to Trekitt & developed from the hugely successful AKU Navy Seal the Pilgrim DS offers the same unparalleled breathability & quick drying but with added impact absorption.   Increased ankle height provides stability & support & a new sole unit with a deeper tread provides traction on varying terrain. This DS model is perfect for demanding duties in hot climates where ultimate breathability & quick drying are critical.   The uppers are made from Air 8000, making the Pilgrim DS 11 times more breathable than traditionally constructed fabric boots.   IMS
- internal Midsole System is designed to reduce injury & enhance impact absorption when load carrying over uneven ground.   Featuring 3mm of EVA cushioning above the 3D midsole ensuring your foot is directly in contact with cushioning rather than a hard midsole.  5mm EVA forefoot, & 17mm EVA heel cushioning take care of impact forces from hard ground. Developed with a new last for enhanced forefoot width & secure heel grip the Pilgrim DS is definitely capable of long tours & extended duties.   The heavier duty Vibram outsole features deeper lugs for enhanced grip on a variety of terrain & has a built in rocker to produce a stable & progressive walking platform. A hugely capable boot designed for purpose & with the addition of the Pilgrim GTX to the range you can have boots suitable for hot, dry, temperate and wet conditions with assurance of a consistent fit wherever you are operating. VAT free sales for qualifying customers outside of the EU please contact us by email (sales@trekitt.co.uk) for prices & delivery charges.
...

Please note that there is limited stock on this model as it is being replaced by the new Pilgrim DS MK2 with the new brown EVA & brown sole unit. See Other Items In The Range to the right of the main picture for links to the new MK2 models. AKU Pilgrim DS Desert Beige. Exclusive to Trekitt & developed from the hugely successful AKU Navy Seal the Pilgrim DS offers the same unparalleled breathability & quick drying but with added impact absorption.   Increased ankle height provides stability & support & a new sole unit with a deeper tread provides traction on varying terrain. This DS model is perfect for demanding duties in hot climates where ultimate breathability & quick drying are critical.   The uppers are made from Air 8000, making the Pilgrim DS 11 times more breathable than traditionally constructed fabric boots.   IMS
- internal Midsole System is designed to reduce injury & enhance impact absorption when load carrying over uneven ground.   Featuring 3mm of EVA cushioning above the 3D midsole ensuring your foot is directly in contact with cushioning rather than a hard midsole.  5mm EVA forefoot, & 17mm EVA heel cushioning take care of impact forces from hard ground. Developed with a new last for enhanced forefoot width & secure heel grip the Pilgrim DS is definitely capable of long tours & extended duties.   The heavier duty Vibram outsole features deeper lugs for enhanced grip on a variety of terrain & has a built in rocker to produce a stable & progressive walking platform. A hugely capable boot designed for purpose & with the addition of the Pilgrim GTX to the range you can have boots suitable for hot, dry, temperate and wet conditions with assurance of a consistent fit wherever you are operating. VAT free sales for qualifying customers outside of the EU please contact us by email (sales@trekitt.co.uk) for prices & delivery charges.
...

AKU Pilgrim GTX Black.   Exclusive to Trekitt & developed from the hugely successful AKU Navy Seal the Pilgrim GTX is completely waterproof with increased breathability & quick drying. EVA foam cushioning offers added impact absorption & the increased ankle height provides stability & support.  A brand new sole unit with a deeper tread provides traction on varying terrain.   This GTX model is perfect for any situation that demands total waterproofness & enhanced breathability.   With a 3D fully taped Gore Tex booty lining & Air 8000 uppers the Pilgrim GTX is 30% more breathable than conventional Gore Tex lined boots.   IMS
- internal Midsole System is designed to reduce injury & enhance impact absorption when load carrying over uneven ground.   Featuring 3mm of EVA cushioning above the 3D midsole ensuring your foot is directly in contact with cushioning rather than a hard midsole.  5mm EVA forefoot, & 17mm EVA heel cushioning take care of impact forces from hard ground. Developed with a new last for enhanced forefoot width & secure heel grip the Pilgrim GTX is definitely capable of long tours & extended duties.   The heavier duty Vibram outsole features deeper lugs for enhanced grip on a variety of terrain & has a built in rocker to produce a stable & progressive walking platform. A hugely capable boot designed for purpose & with the addition of the Pilgrim DS to the range you can be assured of a consistent fit whatever the conditions dem&. VAT free sales for qualifying customers outside of the EU please contact us by email (sales@trekitt.co.uk) for prices & delivery charges.
...

Please note that there is limited stock on this model as it is being replaced by the new Pilgrim GTX MK2 with the new brown EVA & brown sole unit. See Other Items In The Range to the right of the main picture for links to the new MK2 models. AKU Pilgrim GTX MTP Forest.   Exclusive to Trekitt & developed from the hugely successful AKU Navy Seal the Pilgrim GTX is completely waterproof with increased breathability & quick drying. EVA foam cushioning offers added impact absorption & the increased ankle height provides stability & support.  A brand new sole unit with a deeper tread provides traction on varying terrain. This GTX model is perfect for any situation that demands total waterproofness & enhanced breathability.   With a 3D fully taped Gore Tex booty lining & Air 8000 uppers the Pilgrim GTX is 30% more breathable than conventional Gore Tex lined boots.   IMS
- internal Midsole System is designed to reduce injury & enhance impact absorption when load carrying over uneven ground.   Featuring 3mm of EVA cushioning above the 3D midsole ensuring your foot is directly in contact with cushioning rather than a hard midsole.  5mm EVA forefoot, & 17mm EVA heel cushioning take care of impact forces from hard ground. Developed with a new last for enhanced forefoot width & secure heel grip the Pilgrim GTX is definitely capable of long tours & extended duties.   The heavier duty Vibram outsole features deeper lugs for enhanced grip on a variety of terrain & has a built in rocker to produce a stable & progressive walking platform. A hugely capable boot designed for purpose & with the addition of the Pilgrim DS to the range you can be assured of a consistent fit whatever the conditions dem&. VAT free sales for qualifying customers outside of the EU please contact us by email (sales@trekitt.co.uk) for prices & delivery charges.
...