This clever little LED light looks like a bug with its bendy legs & beetle like body.  The high quality Innova Micro Light has four light options providing output from 1 to 6 lumens including a strobe & signal mode.   Battery life on max power is 10 hours & in low power it will run for 22 hours. The body is pink & the legs are pink with black feet. The Gear Tie Technology used for the strong rubber shelled wire ties (legs) will not snap and will grip onto your kit without causing damage.  It is also supplied with a size 0 S-Biner for additional attachment opportunities.   Powered by 2 x CR2016 lithium batteries & IPX4 water resistant, it will cope with rain but not immersion. High visibility Red LED. High Power, Low Power, Strobe, & Signal Mode. Lumen Output:  HIGH
- 6 lumens; LOW
- 1 Lumen Run Time:  HIGH
- 10 hours; LOW 22 Hours Batteries: 2 x 2016 3V Lithium Fully bendable legs can be bent, wrapped, or twisted allowing the  Bug Lit to sit, st&, stay, or shine wherever you need it. Gear Tie Technology
- Tough rubber shell provides excellent grip virtually anywhere, but wont scratch or mark. Gear Tie Technology
- Strong internal wire that holds its shape. Gear Tie Technology
- Quick & easy to securely attach & detach. Gear Tie Technology
- UV resistant
- will not be damaged by extended sun exposure. Size 0 S-Biner is a durable, lightweight double gated karabiner clip
- attach or store nearly anywhere








...

This is a clever little bit of kit that does away with the need to tie fiddly knots in thin cord when securing loads or tensioning tarps & flys-heets. In fact the list of uses is only limited by your imagination. The strong & durable plastic clip carabiner has a sprung steel gate & a built in cam. To operate simply thread thin cord (2mm - 5mm) though the carabiner & around the cam & pull to tighten. The cam works against the cord preventing it from slipping, & you can adjust the tension easily if required. To release the cord simply twist the cam & hey presto, the cord is released. Twin hook pack that

Includes:: 2 x 240cm of 3.5mm cord Two attachment methods for ultimate versatility
- loop system & fixed end system made from sturdy, durable plastic Stainless Steel sprung gate Lightweight, strong construction


...

This heavy duty & high quality tie down strap is perfect for securing heavy & bulky loads to car roof bars, in the back of vans & around the home. The one inch wide polypropylene strap is bar tacked four times for extra security onto a sturdy zinc alloy camming buckle mechanism. Simply feed the strap through the buckle as instructed & pull tight, the self locking buckle will grip the strap tightly ensuring a secure load. A great feature of the buckle is the smooth release mechanism which stops the buckle from flying up when released. You can configure the strap in two different ways to suit your requirements: Loop Configuration: Simply create an adjustable loop by threading the free end of the webbing through the Cam Jam mechanism to secure your load. This configuration is the default method & is similar to those produced by other general purpose cam-lock devices. Lockout Configuration: This method makes the system more versatile by enabling the selective positioning of the Cam Jam mechanism along the webbing loop. The lockout configuration also allows the Cam Jam Tie Down Strap to anchored without the engagement of the Cam Jam mechanism. For example you can secure the Cam Jam strap to a roof rack before you secure the load onto the rack & it prevents the strap sliding around while you set up the load, or while tensioning the strap. Lockout configuration enables locking tension to be applied to the webbing with up to a 3-to-1 mechanical tensioning advantage; this is similar to the effectiveness of ratchet type devices. Please watch the video which explains the two options far better that I can here. These incredibly useful straps are available in three different sizes, each with its own colour coded sewn in label for easy identification. High strength: 2.54cm wide waterproof, high density weave, polypropylene webbing Sewn-in colour coded & numerically labelled tags allows for easy identification of strap length Premium quality die-cast zinc alloy Cam Jam tensioning mechanism with nickel plate finish Cam Jam mechanism features a die-cast zinc alloy housing & centre pivot pin with a stainless steel torsion spring that activates the centre hub with integrated webbing capture ring. The webbing capture ring on the cam mechanism enables the controlled release of tension to any applied load. This is very important when high load force has been applied to the webbing & is a significant improvement over the webbing release behaviour of more conventional cam-lock devices that have a tendency to suddenly & dangerously release tension. Easy to achieve high tension, adjust & control the release without sudden, dangerous unloading Multiple Tie-Down configurations for versatility
- Loop Configuration & Lockout Configuration Working Load Limit: 318kg Break Strength: 953kg
...

This heavy duty & high quality tie down strap is perfect for securing heavy & bulky loads to car roof bars, in the back of vans & around the home. The one inch wide polypropylene strap is bar tacked four times for extra security onto a sturdy zinc alloy camming buckle mechanism. Simply feed the strap through the buckle as instructed & pull tight, the self locking buckle will grip the strap tightly ensuring a secure load. A great feature of the buckle is the smooth release mechanism which stops the buckle from flying up when released. You can configure the strap in two different ways to suit your requirements: Loop Configuration: Simply create an adjustable loop by threading the free end of the webbing through the Cam Jam mechanism to secure your load. This configuration is the default method & is similar to those produced by other general purpose cam-lock devices. Lockout Configuration: This method makes the system more versatile by enabling the selective positioning of the Cam Jam mechanism along the webbing loop. The lockout configuration also allows the Cam Jam Tie Down Strap to anchored without the engagement of the Cam Jam mechanism. For example you can secure the Cam Jam strap to a roof rack before you secure the load onto the rack & it prevents the strap sliding around while you set up the load, or while tensioning the strap. Lockout configuration enables locking tension to be applied to the webbing with up to a 3-to-1 mechanical tensioning advantage; this is similar to the effectiveness of ratchet type devices. Please watch the video which explains the two options far better that I can here. These incredibly useful straps are available in three different sizes, each with its own colour coded sewn in label for easy identification. High strength: 2.54cm wide waterproof, high density weave, polypropylene webbing Sewn-in colour coded & numerically labelled tags allows for easy identification of strap length Premium quality die-cast zinc alloy Cam Jam tensioning mechanism with nickel plate finish Cam Jam mechanism features a die-cast zinc alloy housing & centre pivot pin with a stainless steel torsion spring that activates the centre hub with integrated webbing capture ring. The webbing capture ring on the cam mechanism enables the controlled release of tension to any applied load. This is very important when high load force has been applied to the webbing & is a significant improvement over the webbing release behaviour of more conventional cam-lock devices that have a tendency to suddenly & dangerously release tension. Easy to achieve high tension, adjust & control the release without sudden, dangerous unloading Multiple Tie-Down configurations for versatility
- Loop Configuration & Lockout Configuration Working Load Limit: 318kg Break Strength: 953kg
...

This heavy duty & high quality tie down strap is perfect for securing heavy & bulky loads to car roof bars, in the back of vans & around the home. The one inch wide polypropylene strap is bar tacked four times for extra security onto a sturdy zinc alloy camming buckle mechanism. Simply feed the strap through the buckle as instructed & pull tight, the self locking buckle will grip the strap tightly ensuring a secure load. A great feature of the buckle is the smooth release mechanism which stops the buckle from flying up when released. You can configure the strap in two different ways to suit your requirements: Loop Configuration: Simply create an adjustable loop by threading the free end of the webbing through the Cam Jam mechanism to secure your load. This configuration is the default method & is similar to those produced by other general purpose cam-lock devices. Lockout Configuration: This method makes the system more versatile by enabling the selective positioning of the Cam Jam mechanism along the webbing loop. The lockout configuration also allows the Cam Jam Tie Down Strap to anchored without the engagement of the Cam Jam mechanism. For example you can secure the Cam Jam strap to a roof rack before you secure the load onto the rack & it prevents the strap sliding around while you set up the load, or while tensioning the strap. Lockout configuration enables locking tension to be applied to the webbing with up to a 3-to-1 mechanical tensioning advantage; this is similar to the effectiveness of ratchet type devices. Please watch the video which explains the two options far better that I can here. These incredibly useful straps are available in three different sizes, each with its own colour coded sewn in label for easy identification. High strength: 2.54cm wide waterproof, high density weave, polypropylene webbing Sewn-in colour coded & numerically labelled tags allows for easy identification of strap length Premium quality die-cast zinc alloy Cam Jam tensioning mechanism with nickel plate finish Cam Jam mechanism features a die-cast zinc alloy housing & centre pivot pin with a stainless steel torsion spring that activates the centre hub with integrated webbing capture ring. The webbing capture ring on the cam mechanism enables the controlled release of tension to any applied load. This is very important when high load force has been applied to the webbing & is a significant improvement over the webbing release behaviour of more conventional cam-lock devices that have a tendency to suddenly & dangerously release tension. Easy to achieve high tension, adjust & control the release without sudden, dangerous unloading Multiple Tie-Down configurations for versatility
- Loop Configuration & Lockout Configuration Working Load Limit: 318kg Break Strength: 953kg
...

Think of these as super strong robust pipe cleaners. A durable bendable wire is encased in grippy & sturdy rubber to provide thousands of practical uses from bundling to securing & hooking to knotting.   Completely reusable & and waterproof. Its one of those bits of kit that just becomes indispensable. This pack contains two 30cm  (12) black Gear Ties. Use Gear Ties in the garage, on the boat, in the home, & in countless other places where things need to be secured & organised. Waterproof & safe for use in fresh or salt water without damage UV resistant
- will not be damaged or destroyed by extended sun exposure Tough rubber shell provides excellent grip Use indoors & outdoors in any weather. Strong wire inside holds its shape Wont scratch or mark Twist it, tie it, re-use it
...

Think of these as super strong robust pipe cleaners. A durable bendable wire is encased in grippy & sturdy rubber to provide thousands of practical uses from bundling to securing & hooking to knotting.   Completely reusable & and waterproof. Its one of those bits of kit that just becomes indispensable. This pack contains two 30cm  (12) Coyote Gear Ties. Use Gear Ties in the garage, on the boat, in the home, & in countless other places where things need to be secured & organised. Waterproof & safe for use in fresh or salt water without damage UV resistant
- will not be damaged or destroyed by extended sun exposure Tough rubber shell provides excellent grip Use indoors & outdoors in any weather. Strong wire inside holds its shape Wont scratch or mark Twist it, tie it, re-use it
...

Think of these as super strong robust pipe cleaners. A durable bendable wire is encased in grippy & sturdy rubber to provide thousands of practical uses from bundling to securing & hooking to knotting.   Completely reusable & and waterproof. Its one of those bits of kit that just becomes indispensable. This pack contains two 30cm  (12) Orange Gear Ties. Use Gear Ties in the garage, on the boat, in the home, & in countless other places where things need to be secured & organised. Waterproof & safe for use in fresh or salt water without damage UV resistant
- will not be damaged or destroyed by extended sun exposure Tough rubber shell provides excellent grip Use indoors & outdoors in any weather. Strong wire inside holds its shape Wont scratch or mark Twist it, tie it, re-use it
...

This is an ingenious re-invention of the classic bungee strap that overcomes the problems of impractical hooks & custom adjustment. The Knot Bone adjustable Bungee has carabiner clips instead of open hooks at each end that, once attached, stay put & don’t ping off & thwack your hands. Instead of nasty cheap elastic that loses its stretch over time, the Knot Bone Bungee has a durable, high quality stretch cord that threads through each end & adjusts from 71cm to 15cm. Once you have it adjusted to the right length, secure it in place with a simple wrap-&-lock motion. There is even a small self-clipping plastic cap to the cord ends that keep them in place once youve got your load secured.  Carabiner clip ends for security & safety High quality stretch 5mm cord Adjustable from 15
- 71cm
...

This is an ingenious re-invention of the classic bungee strap that overcomes the problems of impractical hooks & custom adjustment. The Knot Bone adjustable Bungee has carabiner clips instead of open hooks at each end that, once attached, stay put & don’t ping off & thwack your hands. Instead of nasty cheap elastic that loses its stretch over time, the Knot Bone Bungee has a durable, high quality stretch cord that threads through each end & adjusts from 122cm to 25cm. Once you have it adjusted to the right length, secure it in place with a simple wrap-&-lock motion. There is even a small self-clipping plastic cap to the cord ends that keep them in place once youve got your load secured.  Carabiner clip ends for security & safety High quality 9mm stretch cord Adjustable from 25
- 122cm
...