Extremely lightweight 100% stainless construction. For the travel light/no fuss angler. Adjustable caps on all head fittings to achieve perfect alignment of alarms/rear rest & allow maximum clamping of alarms for security. Three sizes allow tight/normal/fanned set up options. 100% designed & manufactured in Engl&. 4.75” Code: FC-JAG-BUZZ2-4.75 5.75” Code: FC-JAG-BUZZ2-5.75 6.75” Code: FC-JAG-BUZZ2-6.75 ...

Non-retractable thumb screw (never lose a screw again) Large diameter precision machined thumbscrew to achieve superior locking. Large diameter tubular extension arms, very stable when fully extended. Adjustable caps on all head fittings to achieve perfect alignment of alarms/rear rest & allow maximum clamping of alarms for security. The extension arms allow rods to be fished very tight to each other or more comfortably spaced or by setting rear tight & front open a wide fan set up can be achieved. Although 100% stainless they are surprisingly lightweight. 100% designed & manufactured in Engl&. Front Code: FC-JAG-BUZZ-3F Rear Code: FC-JAG-BUZZ-3R ...

Designed for use with Buzzbars & Snagbars. Non-retractable thumb screw (never lose a screw again) Large diameter precision machined thumbscrew to achieve superior locking. Large diameter inner tubular section, very stable when fully extended. Second point on inner section, perfect for lightweight stalking, also very useful when on hard ground, use this thinner section to make a pilot hole to then place outer section in hole just created. Tommy bar & adjustable cap – perfect for maximum clamping on buzzbars & the adjustable cap allows tommy bar to be aligned out of the way. Although 100% stainless they are surprisingly lightweight. 100% designed & manufactured in Engl&. Adjustable head 10"
- CODE: FC-JAG-BANK10 Adjustable head 14"
- CODE: FC-JAG-BANK-14 Adjustable head 18"
- CODE: FC-JAG-BANK-18


...

Non-retractable thumb screw (never lose a screw again) Two stabilizing points for maximum rigidity. Large diameter precision machined thumbscrew to achieve superior locking. Main body CNC machined from solid stock for superior strength. Although 100% stainless they are surprisingly lightweight. 100% designed & manufactured in Engl&. Code: FC-JAG-STAB ...

When snagbar clamps are in upright position they are in full snag mode thanks to 2 small locking flats, the clamps can however be rotated a full 360 degrees which allows alarms to be kept square to rod blank no matter what angle rods are fished at. Non-retractable thumb screw (never lose a screw again) 4 places. Large diameter precision machined thumbscrew to achieve superior locking. Large diameter tubular extension arms, very stable when fully extended. Adjustable caps on all head fittings to achieve perfect alignment of alarms/rear rest & allow maximum clamping of alarms for security. The extension arms allows rods to be fished very tight to each other or more comfortably spaced or by setting rear tight & front open a wide fan set up can be achieved. Although 100% stainless they are surprisingly lightweight. 100% designed & manufactured in Engl&. Front: Code: FC-JAG-SNAG-3F Rear: Code: FC-JAG-SNAG-3R ...

Introducing the new SP Max File to the range, in testing sharpening time has been reduced by up to 75% due to the increased metal removal. Use the SP Max File to sharpen the three sides of the hook point before a final hone with the SP Stones. The SP Max File has been developed with Jason Hayward & has been purposely designed for precision hook sharpening with a specific “cut” grade, compact size & special safety edges to avoid damaging the SP Vice. The SP Max File has been manufactured to Jag’s exact

Specification by a world leading Swiss jewellery file manufacturer, enough said! Code: FC-JAG-FILE

...

The SP Vice has been purpose designed to aid precision hook sharpening. It allows for very secure clamping of any hook pattern & size. The SP Vice is totally unique because it has been designed with a large top surface to act as a guide/steady which enables perfectly honed faces of the hook point. It also allows the hook to be clamped very low which greatly reduces “push off” when filing/honing hook points. The SP Vice has been precision machined by JAG in Engl&, the entire head assembly is manufactured from high grade stainless steel for ultimate durability, the handle is machined from light weight aluminium which has been designed to house a set of SP Stones to keep them safe & at hand whilst saving space. In field testing the vice has allowed anglers to achieve incredibly sharp hooks that had previously struggled to master the technique. Code: FC-JAG-VICE ...

Bursting with innovation. Supplied as a pair! Complete compact adjustable system, additional banksticks are not required. NO screw driver required, place supplied driver bit in end of inner section of rear Stage Bite & use to fix supplied screw. Stage Bite! machined teeth on the base bite into wood for amazing rigidity & zero twist. Once fixed down the Stage Bites are going nowhere. Replace internal section with any Jag Bankstick for extra height & total flexibility if required. The thumb Screw that cannot be lost, Jag’s totally unique no-loss system. CNC machined from solid high grade Stainless Steel delivering a super strong construction. Rear Stage Bite with magnetic DRIVER system. (Torque head driver supplied. Titanium coated.) Front Stage Bite shorter to accommodate alarm height. Supplied with four Teflon coated SPAX screws with torque driver head (2 spares). These screws really are awesome, no slippage of driver, no rounding of screw head & virtually no downward pressure needed when fixing screw. Code: FC-JAG-STAGE ...

The most aggressive hard ground bankstick available. The outer section of the Xcavator has been CNC machined from a single piece of stainless steel to deliver an almost indestructible construction. The real magic is in the fine taper, high pitch auger. Two large machined cutting teeth & 43 machined mini cutting teeth plough, cut & smash their way through the very hardest ground. The Xcavator Standard is a fully adjustable bankstick with double knurled head, Jag’s unique no-loss thumb screw & comes complete with a solid stainless two handed tommy bar. Outer diameter of the Xcavators is 17mm (the same as our Stage Bites). Any JAG bankstick can be inserted for full flexibility. Simply Ground Breaking! Code: FC-JAG-XCAV ...

The JAG Ultra Eye gives 20x magnification, extremely important in sharpening truly perfect hook points. When trying to master the art of precision hook sharpening, the ability to see the results up close makes a huge difference. Compact design for storage & lens protection. Code: FC-JAG-EYE ...