Simultaneously connect two RS-232 serial devices to your USB (Universal Serial Bus) ready PC or Mac with this hard-wearing converter Supports standard serial devices USB 1.1 Compliant Easy plug & play installation Connectors: USB (Universal Serial Bus) Mini-B Female to 2 x 9 Way D Serial Male, supplied with 80cm USB (Universal Serial Bus) A/ Mini-B Cable ESD Protection up to 15k V LED Status Indicators High Quality FTDI Chipset Powered from USB (Universal Serial Bus) Bus with no external power supply required Compatible with Windows XP/ Vista/ Server 2003/ Server 2008/7 (32 & 64 Bit), Mac OS X & Linux 2.4 & higher Warranty: 2 years ...

For use with the LINDY 4 Port VGA + Audio Switch 32647
Includes: Infrared remote & cable with IR receiver Remote control
...

Allows IR device (s) to be controlled from up to 3km away using our 700m Fibre Optic HDMI 4K UHD Extenderor our 300m Fibre Optic HDMI 4K UHD Extender Separate modules must be connected to the corresponding units of the Fibre Optic Extender Use with SC/SC Fibre Optic 50/125m OM2 Cables Transmitter/ Receiver Cables length: 1m Note: For use with LINDY Fibre Optic HDMI Extenders 38003, 38063 ...

This simple to use plug & play extender means that you can control up to 4 AV source devices* via IR remote control over distances of up to 450m, without direct line of sight. Perfect for use with concealed AV installations & in combination with CAT5/ Fibre AV extenders which do not offer IR extension. Using low cost CAT5/6/7 cabling the IR over CAT5 Extender Kit delivers full control of your AV equipment, overcoming CEC limitations or incompatibilities. It is perfect for use with non-CEC equipped HDMI AV products. The IR Receiver is small enough to be discreetly attached to a TV via its adhesive base, whilst the IR Emitter features an adhesive front, allowing it to be positioned directly over an IR port. The IR Receiver & Emitter can easily be extended using standard 3.5mm audio extension cables. Please Note: 1 x IR Emitter included, additional IR Emitters required to operate extra devices. Package Contents IR over CAT5 Extender IR over CAT5 Receiver IR Receiver, 1.4m IR Emitter, 1.4m 5V 1.2A Multi-Country Power Supply
- 5.5/2.5mm Outer/ Inner User Manual
...

This simple to use plug & play extender means that you can control up to 4 AV source devices* via IR remote control over distances of up to 30m, without direct line of sight. Perfect for use with concealed AV installations & for use with non-CEC equipped HDMI AV products. Using existing HDMI cabling, including LINDYs Active HDMI Extension Cables & Fibre Optic Hybrid HDMI Cables, the IR over HDMI Extender Kit sends IR signals in place of CEC commands, whilst continuing to deliver the original HDMI signal. The Infrared over HDMI Extender delivers full control of your AV equipment & helps overcome CEC limitations or incompatibilities. The IR Receiver is also small enough to be discreetly attached to a TV via its adhesive base, whilst the IR Emitter features an adhesive front, allowing it to be positioned directly over an IR port. The IR Receiver & Emitter can easily be extended using standard 3.5mm audio extension cables. * Please Note: 1 x IR Emitter included, additional IR Emitters are required to operate extra devices. Package Contents IR over HDMI Injector IR over HDMI Splitter IR Receiver, 1.4m x 1 IR Emitter, 1.4m x 1 User Manual ...

Internal LVD/SE Terminator, HPD68 Female Single Ended (SE)/ Low Voltage Differential (LVD) autosensing Up to 320 M Byte/sec & downward compatible
Size: 51 x 16 x 11mm
...

Access your U Series KVM switches in your offices or at your customers offices worldwide via IP or via the Internet. Simply install this IP Module in to the expansion port of our Modular U Series KVM switch, UC Series KVM Switch or LCD Console with integrated Modular KVM Switch. Once installed the KVM switch may be accessed either through the integrated 10/100 Base-T port via LAN or via the integrated serial interface via modem for dial connections. ...

Simply install this IP Module in to the expansion port of our KVM Switch CAT-32 IP to access your KVM Switch CAT-32 IP in your offices or at any of your customers offices worldwide via IP or the Internet. Once installed the KVM switch may be accessed either through the integrated 10/100 Base-T port via LAN or via the integrated serial interface via modem for dial connections. ...

Easily inserted into the expansion slot of the KVM Switch Classic Remote 8 or KVM Switch Classic Remote 16 10/100 Base T RJ45 LAN port RS232 port for remote dial up access via modem or RS232 output USB Virtual Media Support
- provides remote drives on a local computer via IP available Password secure https & http remote IP access, at the same time for multiple remote users IP V.6 protocol not supported Remote access via browser with Java support
...

The KVM IP Access Switch Classic USB (Universal Serial Bus) allows administrators to monitor & access their computers from remote locations. It connects to the internet, an intranet, LAN or Wan using standard CAT5 or higher cable, or to an analogue telephone line (requires modem), & then uses a supplied KVM cable to connect to a local KVM switch or server. The IP Access Switch Classic's remote access & control software runs on its embedded processor
- so there's no interference with server operation, or impact on network performance. Package Contents IP Access Switch Classic 1m 3-in-1 PS/2 & VGA KVM cable 1.8m RS-232 serial cable (for connecting to a terminal) 1m USB (Universal Serial Bus) A to Mini-B cable External multi country power supply: 100-240VAC-0.3A/DC 12V-1A regulated with standard 2.5/5.5mm connector Multi country adapters for use in US, EURO, UK, AUS/ China
...