This Primus windshield features a sprung construction that allows it to clip directly onto virtually all self sealing gas canisters. The windscreen not only screens the wind, but also improves your stoves efficiency by directing heat up the sides of the pot, so you use less fuel, so you dont need to carry as much, so your pack is lighter. When your done cooking the windscreen can be stored over the top of the canister. An awful lot of design genius has gone into something so simple. ...

A tough 400ml leak/spill proof mug that will keep your beverage of choice hot or cold for hours.   Made from stainless steel with a double wall insulated construction & then powder coated to give it a nice grippy non-slip finish. The easy to use click & pour lid system means your drink wont end up in your lap & the tapered design fits just about all cup holders. We have tried several similar products & have stuck with this one; why?   Because it just works! Stainless Steel construction Powder coated for increased grip & durability Silicone sealed click & pour lid system Will fit most cup holders   ...

The key to the ETA Power efficiency is the heat exchanger on the base of the large pan & the integrated design of the whole cook set.  The base forms a stable platform, houses the burner unit & acts as a 360 degree windshield.  Simply slot the burner unit into place, attach a gas canister, unfold the pan supports & away you go.  The pot sits inside the base unit to ensure all the heat is directed onto the bottom of the pan where the heat exchanger boosts the efficiency rate to an amazing 80% compared with a conventional stove rate of 40%.  Basically all the heat is directed to where it’s needed & not lost up the sides of the pot. The 1.8 litre cooking pot is made from lightweight aluminium & features a non-stick ceramic coating, silicone gripper, strainer lid & fold out handles.  You also get a BPA-Free plastic bowl & to keep the whole set up as compact as possible you can store 2 x small gas canisters inside the cooking pot. The whole lot, burner, pot, gas canisters, lid, bowl & base fit into an insulated storage bag for easy transportation & storage.  Because of the superb fuel efficiency of the ETA Power set you will need to carry less fuel making the overall package lighter than a traditional set up. Eta Power gas stove with Piezo ignition Eta Power cooking pot with heat exchanger Lid with strainer & silicone gripper Integrated windshield & system support Plastic bowl ...

This brilliant tiny little featherweight stove is capable of punching well above its weight thanks to the superbly designed pan supports & clever ignition system. It is perfectly capable of handling large heavy pans despite its miniscule weight of only 82 grams. The integrated Piezo ignition system does away with the need to carry lighters or matches & works in all conditions. Strong pan supports Tiny pack size Minimal weight Piezo ignition system Nylon storage bag ...

As you would expect from these Swedish kit junkies, the finish & quality of this flask is exceptional. The outside of this stainless steel flask is powder coated to give it a grippy & durable finish. The compact design holds 0.25 litres of liquid & the double walled & silver lined vacuum will keep liquids hot (95ºC) for 5 hours, reducing to 30ºC after 24 hours. This versatile flask will keep ice cold drinks chilled for up to 24 hours at below 20º. This flask comes with a standard screw in stopper & a push button opening stopper. The push button stopper, as the name implies, opens with a push of a button to allow you to pour without letting out any heat, the standard stopper has grooves to pour once it’s been unscrewed a bit. Trekitt top tip: Prime the flask before pouring your drink. For hot drinks fill with hot water (95ºC) & let stand for 5 minutes before filling, & for cold drinks fill with iced water & let stand for 5 minutes before filling. Stainless Steel construction Double wall & silver lined vacuum Keeps drinks hot or cold Powder coated Supplied with two stopper Lid acts as a mug ...

The fully adjustable Adjama harness is designed for mountaineering & winter climbing where adjustable leg loops are a must.   However it is also perfectly suitable for trad & sport climbs. The new Endoframe waist & leg loop construction splits the internal webbing to improve load distribution & comfort.   The waist belt has been re-shaped, wider at the sides & narrower at the back to put padding exactly where it is needed.   Buckles have been enhanced & lightened & the two front gear loops are rigid for trad racks whilst the rear ones are flexible as not to interfere with packs.   All tie in points, which are susceptible to intense wear, have been reinforced with dyneema. All in all a brilliant all round harness. ...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...

The  Corax is just such a good all-rounder, it is lightweight & comfortable & will cope with all climbing & mountaineering disciplines.  If you want a light simple harness to do just about everything then look no further.   The double buckle on the waist band makes it easy to get on & off making it perfect for a range of uses from climbing & winter mountaineering to via ferrata. Versatile & easy to use harness Durable construction for summer & winter activities Waistbelt equipped with two Double Back buckles which easily adjust & center the harness, keeping the equipment loops in optimal position Adjustable leg loops allow the harness to be donned while wearing mountaineering or ski boots, or to easily adjust the size for different clothing Designed for greater comfort Allows the weight to be distributed between the waistbelt & the leg loops Ventilated waistbelt, & pressure points lined with soft mesh Facilitates carrying equipment Two rigid equipment loops in front & two flexible ones in back for carrying all necessary equipment without interfering with a backpack ...

The Corax kit contains a Corax harness, Universo belay system, Bandi chalkbag & a bag of Power Crunch chalk. If you are purchasing your first harness or upgrading from an old one, this kit offers the perfect combination of gear. The Corax harness offers maximum versatility & comfort with excellent performance. It comes with the Universo belay system which can handle any diameter of rope, a Bandi chalkbag & 25 g of chalk. ...