As you would expect from these Swedish kit junkies, the finish & quality of this flask is exceptional. The outside of this stainless steel flask is powder coated to give it a grippy & durable finish. The compact design holds 0.25 litres of liquid & the double walled & silver lined vacuum will keep liquids hot (95ºC) for 5 hours, reducing to 30ºC after 24 hours. This versatile flask will keep ice cold drinks chilled for up to 24 hours at below 20º. This flask comes with a standard screw in stopper & a push button opening stopper. The push button stopper, as the name implies, opens with a push of a button to allow you to pour without letting out any heat, the standard stopper has grooves to pour once it’s been unscrewed a bit. Trekitt top tip: Prime the flask before pouring your drink. For hot drinks fill with hot water (95ºC) & let stand for 5 minutes before filling, & for cold drinks fill with iced water & let stand for 5 minutes before filling. Stainless Steel construction Double wall & silver lined vacuum Keeps drinks hot or cold Powder coated Supplied with two stopper Lid acts as a mug ...

As you would expect from these Swedish kit junkies, the finish & quality of this lunch jug is exceptional. The outside of this stainless steel flask is powder coated to give it a grippy & durable finish. The compact design holds 0.5 litres of food & the double walled & silver lined vacuum will keep hot food at 95ºC for 5 hours, reducing to 25ºC after 24 hours. This versatile flask will keep ice cold food & drinks chilled for up to 24 hours at below 20º. The wide opening makes filling easy so you can always have your favourite grub wherever you are, & its a breeze to wash out afterwards. Trekitt top tip: Prime the lunch jug before filling with your grub. For hot food fill with hot water (95ºC) & let stand for 5 minutes before filling, & for cold food fill with iced water & let stand for 5 minutes before filling. Stainless Steel construction Double wall & silver lined vacuum Keeps food hot or cold Powder coated Wide opening ...

The fully adjustable Adjama harness is designed for mountaineering & winter climbing where adjustable leg loops are a must.   However it is also perfectly suitable for trad & sport climbs. The new Endoframe waist & leg loop construction splits the internal webbing to improve load distribution & comfort.   The waist belt has been re-shaped, wider at the sides & narrower at the back to put padding exactly where it is needed.   Buckles have been enhanced & lightened & the two front gear loops are rigid for trad racks whilst the rear ones are flexible as not to interfere with packs.   All tie in points, which are susceptible to intense wear, have been reinforced with dyneema. All in all a brilliant all round harness. ...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...

The Corax kit contains a Corax harness, Universo belay system, Bandi chalkbag & a bag of Power Crunch chalk. If you are purchasing your first harness or upgrading from an old one, this kit offers the perfect combination of gear. The Corax harness offers maximum versatility & comfort with excellent performance. It comes with the Universo belay system which can handle any diameter of rope, a Bandi chalkbag & 25 g of chalk. ...

This emergency torch really is super small, less than 5cm long & weighing only 27g, but has several light modes accessed via an easy to use switch.   The switch can be used with gloved hands & has a lock mode to stop it being accidentally switched on in your pack, & thats just as well as the E-Lite can be stored with its batteries for up to 10 years.   The white LED functions are low power, hig power & strobe & the red LED functions are strobe & high power.   In emergency situations the red LED can be seen for up to 30 hours 300 metres away.   Nasty weather is no match for this cockroach like resilient torch, resisting temperatures from minus 30 to plus 60 degrees celsius, & can be immersed in water up to 1 metre for 30 minutes, so heavy rain is no threat. The retractable ZIP cord offers a multitude of attachment options, from on your head, wrist, bike handlebars, tent pole, trekking pole, dog...well pretty much anything really. ...

The Petzl Fixed Pulley is lightweight, compact, & quick to install on the rope. It offers a good balance between weight & strength. Lightweight, compact pulley Designed for hauling systems & deviations Fixed side plates allow quick installation & coupling with a rope clamp Sheave mounted on self-lubricating bushings for efficiency ...

This brilliant device works on all dynamic single ropes from 8.9 – 11mm, but is optimised for 9.4 – 10.3mm ropes.  The unique design feature of the Grigri is its assisted braking, giving confidence to beginners & experienced climbers alike.  The Grigri 2 has a new design that improves control on descents, eliminating rope jam & sudden release to allow a very gradual release of the rope especially when abseiling or lowering a partner.  The Grigri 2 is 25% smaller & 20% lighter than the original.    Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots & pinches the rope, increasing the braking action until the rope stops sliding The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope & the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling The GRIGRI 2 is compact & ultra-light at 185 g (25 % smaller & 20 % lighter than the GRIGRI) Built with a stainless steel friction plate & cam to ensure a long life for the product For 8.9 to 11 mm single ropes (optimised for 9.4 mm to 10.3 mm ropes) Diagrams for rope installation engraved on belay device (interior & exterior) ...

This brilliant device works on all dynamic single ropes from 8.9 – 11mm, but is optimised for 9.4 – 10.3mm ropes.  The unique design feature of the Grigri is its assisted braking, giving confidence to beginners & experienced climbers alike.  The Grigri 2 has a new design that improves control on descents, eliminating rope jam & sudden release to allow a very gradual release of the rope especially when abseiling or lowering a partner.  The Grigri 2 is 25% smaller & 20% lighter than the original.    Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots & pinches the rope, increasing the braking action until the rope stops sliding The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope & the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling The GRIGRI 2 is compact & ultra-light at 185 g (25 % smaller & 20 % lighter than the GRIGRI) Built with a stainless steel friction plate & cam to ensure a long life for the product For 8.9 to 11 mm single ropes (optimised for 9.4 mm to 10.3 mm ropes) Diagrams for rope installation engraved on belay device (interior & exterior) ...