This locking Pot Support & Stabilizer kit adapts the Jetboil PCS, Zip, Flash, Sol & Sol Ti burners for use with Jetboil Flux Ring cookware or your own pots & pans.   Simply twist clockwise to lock the support onto the burner.   The stabilizer clips onto the bottom of the gas canister to increase stability & safety. ...

The Jetboil Sol Aluminium is a lightweight, high performance & incredibly efficient camping stove that is perfect for lightweight trekkers. The original, & still pretty much the best, completely integrated cook system.   Weighing only 300 g, the Jetboil Sol Aluminium cooking system combines everything you need to heat up your nosh in one tiny compact package.   Weight is kept low by the use of premium quality Aluminium for the cooking pot making it ideal for fast & fuel efficient water boiling & cooking. The trick to Jetboils efficiency is the flux ring technology which drastically reduces boil times, saving fuel & gets nourishment into you quickly. The Flux ring protects the burner from the wind & hugely increases the surface area of the base of the cooking pot to make sure all the heat is directed there & not wasted up the sides.   Boil time for 1/2 a litre of water in good conditions is around 2 minutes & 15 seconds.   Thanks to the Thermo-Regulate Burner Technology the Sol provides a consistent heat output down to minus 6 degrees  Celsius from just about any self sealing externally threaded canister. Getting the Sol started couldnt be easier thanks to the integrated & reliable push button igniter, so no more worrying about soggy matches or empty lighters. A heat resistant neoprene sleeve covers the main pot enabling you to pick up the whole thing & get stuck in to your food & the lid features a drinking spout. The Sol burner unit & a 100 g gas canister can both be stored inside the pot for easy transportation.

Features: Jetboil Thermo-Regulate technology
- consistent heat down to -6


...

The Jetboil Sol Titanium is a mega lightweight, high performance & incredibly efficient camping stove that is perfect for lightweight trekkers. The original, & still pretty much the best, completely integrated cook system.   Weighing only 240 g, the Jetboil Sol Titanium cooking system combines everything you need to heat up your nosh in one tiny compact package.   Weight is kept to a minimum by the use of premium quality Titanium for the cooking pot making it ideal for fast & fuel efficient water boiling only. Do not use for cooking food to avoid potential damage to cooking  cup or Flux Ring. The trick to Jetboils efficiency is the flux ring technology which drastically reduces boil times, saving fuel & gets nourishment into you quickly. The Flux ring protects the burner from the wind & hugely increases the surface area of the base of the cooking pot to make sure all the heat is directed there & not wasted up the sides.   Boil time for 1/2 a litre of water in good conditions is around 2 minutes & 15 seconds.   Thanks to the Thermo-Regulate Burner Technology the Sol provides a consistent heat output down to minus 6 degrees  Celsius from just about any self sealing externally threaded canister. Getting the Sol started couldnt be easier thanks to the integrated & reliable push button igniter, so no more worrying about soggy matches or empty lighters. A heat resistant neoprene sleeve covers the main pot enabling you to pick up the whole thing & get stuck in to your food & the lid features a drinking spout. The Sol burner unit & a 100 g gas canister can both be stored inside the pot for easy transportation.

Features: Jetboil Thermo-Regulate technology
- consistent heat down to -6


...

The massive 1.8 liter Sumo is a snow-melting power-house that locks directly onto your Jetboil burner base for ultra-quick set-up. Small groups can enjoy the efficiency of one-pot cooking with Sumo.  The trick to Sumos efficiency is the flux ring technology which drastically reduces boil times, saving fuel & gets nourishment into you quickly. The Flux Ring protects the burner from the wind & hugely increases the surface area of the Sumos cooking pot base to make sure all the heat is directed there & not wasted up the sides.  The Sumo offers loads of packing options, it can hold a 100 gm or 230 gm canister of fuel & burner base with room to spare, or a complete Sol or Zip system with 100 gm fuel. It is also capable of stowing a 450 gram fuel canister.  Compatible with Jetboil Sol, Zip, Flash, PCS, GCS & Sumo systems Compatible with all PCS family add-ons except the Coffee Press Can fully stow a Sol or Zip system!   ...

The most simple  Jetboil system available.   The Zip Cooking System provides all the high performance & incredibly efficient Jetboil features without any of the bells & whistles.  The original, & still pretty much the best, completely integrated cook system. The Zip weighs only 345 g & yet combines everything you need to heat up your nosh in one tiny compact package.  The trick to Jetboils efficiency is the flux ring technology which drastically reduces boil times, saving fuel & gets nourishment into you quickly. The Flux ring protects the burner from the wind & hugely increases the surface area of the base of the cooking pot to make sure all the heat is directed there & not wasted up the sides.   Boil time for 1/2 a litre of water in good conditions is around 2 minutes & 30 seconds.  A heat resistant neoprene sleeve covers the main pot enabling you to pick up the whole thing & get stuck in to your food & the lid features a drinking spout. The Zip burner unit & a 100 g gas canister can both be stored inside the pot for easy transportation.

Features: 0.8 Liter Flux Ring cooking cup with insulating Cargo Cozy Adjustable burner Fuel Stabilizer tripod included. Drink-through lid with pour spout & strainer Bottom cover doubles as a measuring cup & bowl Compatible with all Jetboil accessories

...

The  Alfar has a pretty cool hybrid construction consisting of  Polartec  Powerstretch  Pro in the sleeves, under arm & hood panels. Where as the main body & hood are made up from Neutron 120 synthetic insulation encased in a 30 denier, micro rip-stop nylon, windproof fabric with a DWR  (Durable Water repellency) finish. Super techy with a close, fully articulated athletic fit, useful thumb loops, harness compatible hand pockets & under helmet hood. The  Polartec  Powerstretch  Pro panels allow for reduced bulk when layering & increased breathability in warmer areas such as the underarms. The Neutron synthetic insulation traps the warm air between its fibres and the windproof outer fabric prevents that warm air from escaping. So the different parts of this jacket work together to regulated your body temperature & maintain a great level of comfort. Use the  Alfar as a lightweight active outer piece in fair conditions, or in colder climates you can use is as part of a modular layering system as a good weight mid-layer. Polartec  Powerstretch  Pro sleeves NEUTRON 120 main body synthetic, breathable insulation 30 Denier windproof, micro rip-stop nylon main body outer with DWR finish Athletic, streamlined, articulated cut Flatlocked anti-chafe seams Harness compatible pockets with YKK zippers & front facing insulation Roll-away thumb loops & back-of-hand protection Paneled hood with NEUTRON 120 synthetic, breathable insulation in centre; stretch  Polartec  Powerstretch  Pro at sides YKK centre front zipper Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo front & rear ...

The  Alfar has a pretty cool hybrid construction consisting of  Polartec  Powerstretch  Pro in the sleeves, under arm & hood panels. Where as the main body & hood are made up from Neutron 120 synthetic insulation encased in a 30 denier, micro rip-stop nylon, windproof fabric with a DWR  (Durable Water repellency) finish. Super techy with a close, fully articulated athletic fit, useful thumb loops & harness compatible hand pockets. The  Polartec  Powerstretch  Pro panels allow for reduced bulk when layering & increased breathability in warmer areas such as the underarms. The Neutron synthetic insulation traps the warm air between its fibres and the windproof outer fabric prevents that warm air from escaping. So the different parts of this jacket work together to regulated your body temperature & maintain a great level of comfort. Use the  Alfar as a lightweight active outer piece in fair conditions, or in colder climates you can use is as part of a modular layering system as a good weight mid-layer. Polartec  Powerstretch  Pro sleeves NEUTRON 120 main body synthetic, breathable insulation 30 Denier windproof, micro rip-stop nylon main body outer with DWR finish Athletic, streamlined, articulated cut Flatlocked anti-chafe seams Harness compatible pockets with YKK zippers & front facing insulation Roll-away thumb loops & back-of-hand protection Paneled hood with NEUTRON 120 synthetic, breathable insulation in centre; stretch Polartec Powerstretch Pro at sides YKK centre front zipper Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo front & rear ...

The  Hymir  Smock from  Jottnar has to be one of the most breathable, robust, fully waterproof smocks on the market. Made from the lightest weight  Polartec  Neoshell available  (96g/m²) & only weighing, a stupidly light, 330g. You can pack your  Hymir away into its storage sack, pop it into your bag & only bring it out when you need it. Most of the time you will probably forget you are carrying it. This is the lightest weight  Noeshell smock on the market. The minimalistic design means there is no unwanted bulk, & the fact that there are no hand warming pockets makes it perfect for use with a climbing harness or backpack hipbelt. The stuff sack that is provided comes with a crab loop so you can attach it to your harness if you need to get it out quickly at a belay point. The spacious helmet compatible hood features a mouldable wire stiffened peak & internal drawcords to keep thing looking tidy. Polartec  Neoshell is 100% waterproof with a 10, 000mm hydrostatic head. Its super breathable with a 0.5 ft²/min/ft² air permeability rate. You will be hard pushed to find a more durable jacket at this weight with Jottnars quality of construction. This Jacket is the lightest weight Noeshell smock on the market. Waterproof, breathable, 3 layer  Polartec  Neoshell Lightweight, packable, robust Athletic, streamlined, articulated cut Adjustable, helmet compatible hood Scooped drop back hem YKK  Aquaguard water repellant half zip for reduced weight Harness compatible chest pocket with YKK  Aquaguard water repellant zipper Zippered stuff sack with carabiner loop Wire stiffened hood brim with fully mouldable peak Internally protected hood pull cords Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation BEMIS® ST-318 13mm seam tape for light weight ...

The Bergelmir from Jottnar is a streamlined, uncluttered & beautifully designed mountain shell. Made using the finest fabrics & totally uncompromising in its pursuit of ultimate performance. Polartec stretch Neo Shell delivers total waterproofing, true breathable performance & unrestricted movement. This really is a shell that you can put on, & keep on throughout the day no matter what the weather throws at you. Think of it as a lightweight waterproof stretchy softshell. The first thing we noticed when we put on the Bergelmir is how quiet the fabric is compared to Gore-Tex Pro jackets, you can put up the hood, rotate your head & still hear whats going on, perfect for climbing when you need to hear your partner. While we are on the subject of hoods, the one on the Bergelmir is just about perfect. Now I have been accused of being a bit of a hood pedant, but I cant stand overly massive hoods that dont fit your head & flop around your eyes. The Bergelmir hood is fully helmet compatible yet still fits snugly when lidless, it has a wired & stiffened peak that keeps its shape & offers superb visibility. If you are not using the hood, but still have the zip fully up there is good face protection from the high neck line & all adjuster cords are routed internally to avoid whipping you in the face. Pockets are set high on the chest to avoid interfering with a harness & are big enough to take a folded OS map. A laminated internal pocket securely holds a phone or GPS.  & thats about it as far as features go, pretty much everything you need & nothing you dont. But what really sets the Bergelmir apart from the crowds is the sublime attention to detail & the fantastic fit, close & snug around the hips yet with plenty of maneuverability through the shoulders & arms. This jacket has been made with a strict end users design brief & definitely not to fill a marketing slot! Polartec stretch Neo Shell fabric Waterproof & highly breathable Athletic, streamlined, articulated cut Scooped cuffs Scooped drop-back hem Embroidered logo YKK Aquaguard VISLON water repellent front zipper with internal storm gasket YKK Aquaguard coil water repellent chest pocket zippers Helmet compatible hood Wire stiffened hood brim with fully mouldable peak Harness compatible chest pockets OS map compatible pockets Internal neck guard Beard guard Internally protected hood pull cords Internal wallet/phone pocket Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation ...

The  Bergelmir from  Jottnar is a streamlined, uncluttered & beautifully designed mountain shell. Made using the finest fabrics & totally uncompromising in its pursuit of ultimate performance.  Polartec stretch  Neo Shell delivers total waterproofing, true breathable performance & unrestricted movement. This really is a shell that you can put on, & keep on throughout the day no matter what the weather throws at you. Think of it as a lightweight waterproof stretchy softshell. The first thing we noticed when we put on the  Bergelmir is how quiet the fabric is compared to Gore-Tex Pro jackets, you can put up the hood, rotate your head & still hear whats going on, perfect for climbing when you need to hear your partner. While we are on the subject of hoods, the one on the  Bergelmir is just about perfect. Now I have been accused of being a bit of a hood pedant, but I cant stand overly massive hoods that dont fit your head & flop around your eyes. The  Bergelmir hood is fully helmet compatible yet still fits snugly when lidless, it has a wired & stiffened peak that keeps its shape & offers superb visibility. If you are not using the hood, but still have the zip fully up there is good face protection from the high neck line & all adjuster cords are routed internally to avoid whipping you in the face. Pockets are set high on the chest to avoid interfering with a harness & are big enough to take a folded OS map. A laminated internal pocket securely holds a phone or GPS.  & thats about it as far as features go, pretty much everything you need & nothing you dont. But what really sets the  Bergelmir apart from the crowds is the sublime attention to detail & the fantastic fit, close & snug around the hips yet with plenty of maneuverability through the shoulders & arms. This jacket has been made with a strict end users design brief & definitely not to fill a marketing slot! Polartec stretch  Neo Shell fabric Waterproof & highly breathable Athletic, streamlined, articulated cut Scooped cuffs Scooped drop-back hem Embroidered logo YKK  Aquaguard VISLON water repellent front zipper with internal storm gasket YKK  Aquaguard coil water repellent chest pocket zippers Helmet compatible hood Wire stiffened hood brim with fully mouldable peak Harness compatible chest pockets OS map compatible pockets Internal neck guard Beard guard Internally protected hood pull cords Internal wallet/phone pocket Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation ...