The most simple  Jetboil system available.   The Zip Cooking System provides all the high performance & incredibly efficient Jetboil features without any of the bells & whistles.  The original, & still pretty much the best, completely integrated cook system. The Zip weighs only 345 g & yet combines everything you need to heat up your nosh in one tiny compact package.  The trick to Jetboils efficiency is the flux ring technology which drastically reduces boil times, saving fuel & gets nourishment into you quickly. The Flux ring protects the burner from the wind & hugely increases the surface area of the base of the cooking pot to make sure all the heat is directed there & not wasted up the sides.   Boil time for 1/2 a litre of water in good conditions is around 2 minutes & 30 seconds.  A heat resistant neoprene sleeve covers the main pot enabling you to pick up the whole thing & get stuck in to your food & the lid features a drinking spout. The Zip burner unit & a 100 g gas canister can both be stored inside the pot for easy transportation.

Features: 0.8 Liter Flux Ring cooking cup with insulating Cargo Cozy Adjustable burner Fuel Stabilizer tripod included. Drink-through lid with pour spout & strainer Bottom cover doubles as a measuring cup & bowl Compatible with all Jetboil accessories

...

The Fenrir is probably the most versatile down jacket you will ever own. Down Tek  Nanotechnology treatment creates surface tension on the down cluster, so when molecules of moisture encounter  Down Tek, the moisture is forced to collect into a sphere & roll off the down cluster rather than adhering to & soaking into it. This treatment adds no discernable weight & doesnt not effect the downs lofting capability. It is environmentally friendly & dramatically improves the wet performance of down.  Down Tek absorbs 30% less water, dries 60% faster & retains significantly more loft when exposed to moisture, & unlike other treatments out there, it doesnt wash out. All this magic 850 fill power premium goose down is cocooned in a lightweight 30 Denier windproof, rip-stop nylon outer with DWR finish, allowing the down to fully loft & resulting in a highly weather resistant, warm jacket. Using an athletic cut & hybrid construction; not only does the Fenrir fit superbly reducing the amount of dead space in the jacket. It also has Neutron breathable synthetic insulation in key moisture areas such as, the cuff hems & collar. It also feature & elasticated hood, YKK front zip with glove compatible zip pulls & one hand operated hem draw cords. Athletic, anatomical cut with hybrid construction DOWN-TEK water repellent down insulation 850 Fill Power, premium grey goose down in a minimum 93/7 ratio NEUTRON™ breathable synthetic insulation in potential wet-out zones at cuffs, hem & collar Body-mapped down fill schedule Windproof, micro rip-stop nylon face fabric with DWR finish Elasticated hood with softened zip guard YKK® front zipper Hand warmer pockets with front facing insulation Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo ...

The  Alfar has a pretty cool hybrid construction consisting of  Polartec  Powerstretch  Pro in the sleeves, under arm & hood panels. Where as the main body & hood are made up from Neutron 120 synthetic insulation encased in a 30 denier, micro rip-stop nylon, windproof fabric with a DWR  (Durable Water repellency) finish. Super techy with a close, fully articulated athletic fit, useful thumb loops, harness compatible hand pockets & under helmet hood. The  Polartec  Powerstretch  Pro panels allow for reduced bulk when layering & increased breathability in warmer areas such as the underarms. The Neutron synthetic insulation traps the warm air between its fibres and the windproof outer fabric prevents that warm air from escaping. So the different parts of this jacket work together to regulated your body temperature & maintain a great level of comfort. Use the  Alfar as a lightweight active outer piece in fair conditions, or in colder climates you can use is as part of a modular layering system as a good weight mid-layer. Polartec  Powerstretch  Pro sleeves NEUTRON 120 main body synthetic, breathable insulation 30 Denier windproof, micro rip-stop nylon main body outer with DWR finish Athletic, streamlined, articulated cut Flatlocked anti-chafe seams Harness compatible pockets with YKK zippers & front facing insulation Roll-away thumb loops & back-of-hand protection Paneled hood with NEUTRON 120 synthetic, breathable insulation in centre; stretch  Polartec  Powerstretch  Pro at sides YKK centre front zipper Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo front & rear ...

The  Alfar has a pretty cool hybrid construction consisting of  Polartec  Powerstretch  Pro in the sleeves, under arm & hood panels. Where as the main body & hood are made up from Neutron 120 synthetic insulation encased in a 30 denier, micro rip-stop nylon, windproof fabric with a DWR  (Durable Water repellency) finish. Super techy with a close, fully articulated athletic fit, useful thumb loops & harness compatible hand pockets. The  Polartec  Powerstretch  Pro panels allow for reduced bulk when layering & increased breathability in warmer areas such as the underarms. The Neutron synthetic insulation traps the warm air between its fibres and the windproof outer fabric prevents that warm air from escaping. So the different parts of this jacket work together to regulated your body temperature & maintain a great level of comfort. Use the  Alfar as a lightweight active outer piece in fair conditions, or in colder climates you can use is as part of a modular layering system as a good weight mid-layer. Polartec  Powerstretch  Pro sleeves NEUTRON 120 main body synthetic, breathable insulation 30 Denier windproof, micro rip-stop nylon main body outer with DWR finish Athletic, streamlined, articulated cut Flatlocked anti-chafe seams Harness compatible pockets with YKK zippers & front facing insulation Roll-away thumb loops & back-of-hand protection Paneled hood with NEUTRON 120 synthetic, breathable insulation in centre; stretch Polartec Powerstretch Pro at sides YKK centre front zipper Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo front & rear ...

The  Hymir  Smock from  Jottnar has to be one of the most breathable, robust, fully waterproof smocks on the market. Made from the lightest weight  Polartec  Neoshell available  (96g/m²) & only weighing, a stupidly light, 330g. You can pack your  Hymir away into its storage sack, pop it into your bag & only bring it out when you need it. Most of the time you will probably forget you are carrying it. This is the lightest weight  Noeshell smock on the market. The minimalistic design means there is no unwanted bulk, & the fact that there are no hand warming pockets makes it perfect for use with a climbing harness or backpack hipbelt. The stuff sack that is provided comes with a crab loop so you can attach it to your harness if you need to get it out quickly at a belay point. The spacious helmet compatible hood features a mouldable wire stiffened peak & internal drawcords to keep thing looking tidy. Polartec  Neoshell is 100% waterproof with a 10, 000mm hydrostatic head. Its super breathable with a 0.5 ft²/min/ft² air permeability rate. You will be hard pushed to find a more durable jacket at this weight with Jottnars quality of construction. This Jacket is the lightest weight Noeshell smock on the market. Waterproof, breathable, 3 layer  Polartec  Neoshell Lightweight, packable, robust Athletic, streamlined, articulated cut Adjustable, helmet compatible hood Scooped drop back hem YKK  Aquaguard water repellant half zip for reduced weight Harness compatible chest pocket with YKK  Aquaguard water repellant zipper Zippered stuff sack with carabiner loop Wire stiffened hood brim with fully mouldable peak Internally protected hood pull cords Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation BEMIS® ST-318 13mm seam tape for light weight ...

The  Bergelmir from  Jottnar is a streamlined, uncluttered & beautifully designed mountain shell. Made using the finest fabrics & totally uncompromising in its pursuit of ultimate performance.  Polartec stretch  Neo Shell delivers total waterproofing, true breathable performance & unrestricted movement. This really is a shell that you can put on, & keep on throughout the day no matter what the weather throws at you. Think of it as a lightweight waterproof stretchy softshell. The first thing we noticed when we put on the  Bergelmir is how quiet the fabric is compared to Gore-Tex Pro jackets, you can put up the hood, rotate your head & still hear whats going on, perfect for climbing when you need to hear your partner. While we are on the subject of hoods, the one on the  Bergelmir is just about perfect. Now I have been accused of being a bit of a hood pedant, but I cant stand overly massive hoods that dont fit your head & flop around your eyes. The  Bergelmir hood is fully helmet compatible yet still fits snugly when lidless, it has a wired & stiffened peak that keeps its shape & offers superb visibility. If you are not using the hood, but still have the zip fully up there is good face protection from the high neck line & all adjuster cords are routed internally to avoid whipping you in the face. Pockets are set high on the chest to avoid interfering with a harness & are big enough to take a folded OS map. A laminated internal pocket securely holds a phone or GPS.  & thats about it as far as features go, pretty much everything you need & nothing you dont. But what really sets the  Bergelmir apart from the crowds is the sublime attention to detail & the fantastic fit, close & snug around the hips yet with plenty of maneuverability through the shoulders & arms. This jacket has been made with a strict end users design brief & definitely not to fill a marketing slot! Polartec stretch  Neo Shell fabric Waterproof & highly breathable Athletic, streamlined, articulated cut Scooped cuffs Scooped drop-back hem Embroidered logo YKK  Aquaguard VISLON water repellent front zipper with internal storm gasket YKK  Aquaguard coil water repellent chest pocket zippers Helmet compatible hood Wire stiffened hood brim with fully mouldable peak Harness compatible chest pockets OS map compatible pockets Internal neck guard Beard guard Internally protected hood pull cords Internal wallet/phone pocket Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation ...

The Bergelmir from Jottnar is a streamlined, uncluttered & beautifully designed mountain shell. Made using the finest fabrics & totally uncompromising in its pursuit of ultimate performance. Polartec stretch Neo Shell delivers total waterproofing, true breathable performance & unrestricted movement. This really is a shell that you can put on, & keep on throughout the day no matter what the weather throws at you. Think of it as a lightweight waterproof stretchy softshell. The first thing we noticed when we put on the Bergelmir is how quiet the fabric is compared to Gore-Tex Pro jackets, you can put up the hood, rotate your head & still hear whats going on, perfect for climbing when you need to hear your partner. While we are on the subject of hoods, the one on the Bergelmir is just about perfect. Now I have been accused of being a bit of a hood pedant, but I cant stand overly massive hoods that dont fit your head & flop around your eyes. The Bergelmir hood is fully helmet compatible yet still fits snugly when lidless, it has a wired & stiffened peak that keeps its shape & offers superb visibility. If you are not using the hood, but still have the zip fully up there is good face protection from the high neck line & all adjuster cords are routed internally to avoid whipping you in the face. Pockets are set high on the chest to avoid interfering with a harness & are big enough to take a folded OS map. A laminated internal pocket securely holds a phone or GPS.  & thats about it as far as features go, pretty much everything you need & nothing you dont. But what really sets the Bergelmir apart from the crowds is the sublime attention to detail & the fantastic fit, close & snug around the hips yet with plenty of maneuverability through the shoulders & arms. This jacket has been made with a strict end users design brief & definitely not to fill a marketing slot! Polartec stretch Neo Shell fabric Waterproof & highly breathable Athletic, streamlined, articulated cut Scooped cuffs Scooped drop-back hem Embroidered logo YKK Aquaguard VISLON water repellent front zipper with internal storm gasket YKK Aquaguard coil water repellent chest pocket zippers Helmet compatible hood Wire stiffened hood brim with fully mouldable peak Harness compatible chest pockets OS map compatible pockets Internal neck guard Beard guard Internally protected hood pull cords Internal wallet/phone pocket Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation ...

The  Fenrir is probably the most versatile down jacket you will ever own.  Down Tek  Nanotechnology treatment creates surface tension on the down cluster, so when molecules of moisture encounter  Down Tek, the moisture is forced to collect into a sphere & roll off the down cluster rather than adhering to & soaking into it. This treatment adds no discernable weight & doesnt not effect the downs lofting capability. It is environmentally friendly & dramatically improves the wet performance of down.  Down Tek absorbs 30% less water, dries 60% faster & retains significantly more loft when exposed to moisture, & unlike other treatments out there, it doesnt wash out. All this magic 850 fill power premium goose down is cocooned in a lightweight 30 Denier windproof, rip-stop nylon outer with DWR finish, allowing the down to fully loft & resulting in a highly weather resistant, warm jacket. Using an athletic cut & hybrid construction; not only does the  Fenrir fit superbly reducing the amount of dead space in the jacket. It also has Neutron breathable synthetic insulation in key moisture areas such as, the cuff hems & collar. It also feature & elasticated hood, YKK front zip with glove compatible zip pulls & one hand operated hem draw cords. Athletic, anatomical cut with hybrid construction DOWN-TEK water repellent down insulation 850 Fill Power, premium grey goose down in a minimum 93/7 ratio NEUTRON™ breathable synthetic insulation in potential wet-out zones at cuffs, hem & collar Body-mapped down fill schedule Windproof, micro rip-stop nylon face fabric with DWR finish Elasticated hood with softened zip guard YKK® front zipper Hand warmer pockets with front facing insulation Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo ...

This premium quality & superbly designed expedition jacket is packed with 850 fill power premium goose & duck down that has been made highly water repellant by  Down-Tek  Nanotechnology. This cationic treatment creates surface tension on the down cluster. When molecules of moisture encounter  Down-Tek, the moisture is forced to collect into a sphere & roll off the down cluster rather than adhering to & soaking into it. This treatment adds no discernable weight, is environmentally friendly & dramatically improves the wet performance of down.  Down-Tek absorbs 30% less water, dries 60% faster & retains significantly more loft when exposed to moisture. All this magic down is cocooned in a 30 Denier windproof, rip-stop nylon main body outer with DWR finish resulting in a highly weather resistant jacket. Box wall construction is used on the main body to maximise loft & insulation, whilst the arms have a stitch through construction to minimise weight.  Jottnar have applied their fastidious detailing to this jacket & used Neutron 120 synthetic filling on the cuffs, hem & collar, these are areas most likely to wet out. The fully insulated & adjustable helmet compatible hood has a stiffened & wired peak & a nice high collar with soft  Rentex  (synthetic micro-suede) beard guard to protect your face. A 2 way YKK front zip is used to allow harness access & it has a large synthetic filled internal baffle to reduce cold spots.  Rentex is also used to line the inner cuffs which are elasticated with Velcro adjustment. There are two zipped hand pockets with protective front facing insulation & one zipped internal pocket capable of swallowing a 1 litre bottle. You even get a choice of zip puller cords, lightweight, or glove compatible. DOWN-TEK water repellent down insulation 850 fill power, 93/7 premium goose/duck down ratio Body-mapped down fill schedule Box wall torso construction for warmth Stitch through arm construction for light weight Neutron 120 insulation in wet-out zones at cuffs, hem & collar 30 Denier windproof, rip-stop nylon main body outer with DWR finish Helmet compatible insulated hood with internal pulls Wire stiffened hood brim with fully mouldable peak 1-litre bottle compatible, zipped inner pocket YKK two-way front zipper Athletic, streamlined, articulated cut Internal oversized storm baffle with Neutron 120 synthetic insulation Hand warmer pockets with front facing insulation Adjustable,  elasticated cuffs with Velcro adjusters and  Rentex cuff liners Rentex beard guard Internally protected hood pull cords Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo ...

This premium quality & superbly designed expedition jacket is packed with 850 fill power premium goose & duck down that has been made highly water repellant by  Down Tek  Nanotechnology. This cationic treatment creates surface tension on the down cluster. When molecules of moisture encounter  Down-Tek, the moisture is forced to collect into a sphere & roll off the down cluster rather than adhering to & soaking into it. This treatment adds no discernable weight, is environmentally friendly & dramatically improves the wet performance of down.  Down-Tek absorbs 30% less water, dries 60% faster & retains significantly more loft when exposed to moisture. All this magic down is cocooned in a 30 Denier windproof, rip-stop nylon main body outer with DWR finish resulting in a highly weather resistant jacket. Box wall construction is used on the main body to maximise loft & insulation, whilst the arms have a stitch through construction to minimise weight.  Jottnar have applied their fastidious detailing to this jacket & used Neutron 120 synthetic filling on the cuffs, hem & collar, these are areas most likely to wet out. The fully insulated & adjustable helmet compatible hood has a stiffened & wired peak & a nice high collar with soft  Rentex  (synthetic micro-suede) beard guard to protect your face. A 2 way YKK front zip is used to allow harness access & it has a large synthetic filled internal baffle to reduce cold spots.  Rentex is also used to line the inner cuffs which are elasticated with Velcro adjustment. There are two zipped hand pockets with protective front facing insulation & one zipped internal pocket capable of swallowing a 1 litre bottle. You even get a choice of zip puller cords, lightweight, or glove compatible. DOWN-TEK water repellent down insulation 850 fill power, 93/7 premium goose/duck down ratio Body-mapped down fill schedule Box wall torso construction for warmth Stitch through arm construction for light weight Neutron 120 insulation in wet-out zones at cuffs, hem & collar 30 Denier windproof, rip-stop nylon main body outer with DWR finish Helmet compatible insulated hood with internal pulls Wire stiffened hood brim with fully mouldable peak 1-litre bottle compatible, zipped inner pocket YKK two-way front zipper Athletic, streamlined, articulated cut Internal oversized storm baffle with Neutron 120 synthetic insulation Hand warmer pockets with front facing insulation Adjustable,  elasticated cuffs with Velcro adjusters and  Rentex cuff liners Rentex beard guard Internally protected hood pull cords Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo ...