The fully adjustable Adjama harness is designed for mountaineering & winter climbing where adjustable leg loops are a must.   However it is also perfectly suitable for trad & sport climbs. The new Endoframe waist & leg loop construction splits the internal webbing to improve load distribution & comfort.   The waist belt has been re-shaped, wider at the sides & narrower at the back to put padding exactly where it is needed.   Buckles have been enhanced & lightened & the two front gear loops are rigid for trad racks whilst the rear ones are flexible as not to interfere with packs.   All tie in points, which are susceptible to intense wear, have been reinforced with dyneema. All in all a brilliant all round harness. ...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...

The ergonomically shaped handle is over moulded with dual density grip for greater friction & better grip. The grip is wider at the bottom, providing better comfort for your pinkie fingers during use. The index finger indent has also been increased, offering greater efficiency when pulling on the ascender. The cam has been redesigned to minimize friction when sliding the ascender up the rope while the angled teeth provide secure grip in the worst conditions (wet, icy, or muddy ropes). The geometry of the single piece aluminium frame ensures optimal handle orientation when the device is loaded & will maintain solid, comfortable performance for ascents of any length. Moulded grip provides even greater comfort with a more ergonomically shaped handle. This shape keeps your hand from sliding to the bottom of the frame each time you pull on the ASCENSION. The bi-material handle

Includes:: a rubber over moulded grip, increasing the comfort & grip in wet or icy conditions.

...

The  Corax is just such a good all-rounder, it is lightweight & comfortable & will cope with all climbing & mountaineering disciplines.  If you want a light simple harness to do just about everything then look no further.   The double buckle on the waist band makes it easy to get on & off making it perfect for a range of uses from climbing & winter mountaineering to via ferrata. Versatile & easy to use harness Durable construction for summer & winter activities Waistbelt equipped with two Double Back buckles which easily adjust & center the harness, keeping the equipment loops in optimal position Adjustable leg loops allow the harness to be donned while wearing mountaineering or ski boots, or to easily adjust the size for different clothing Designed for greater comfort Allows the weight to be distributed between the waistbelt & the leg loops Ventilated waistbelt, & pressure points lined with soft mesh Facilitates carrying equipment Two rigid equipment loops in front & two flexible ones in back for carrying all necessary equipment without interfering with a backpack ...

The Corax kit contains a Corax harness, Universo belay system, Bandi chalkbag & a bag of Power Crunch chalk. If you are purchasing your first harness or upgrading from an old one, this kit offers the perfect combination of gear. The Corax harness offers maximum versatility & comfort with excellent performance. It comes with the Universo belay system which can handle any diameter of rope, a Bandi chalkbag & 25 g of chalk. ...

The Petzl Fixed Pulley is lightweight, compact, & quick to install on the rope. It offers a good balance between weight & strength. Lightweight, compact pulley Designed for hauling systems & deviations Fixed side plates allow quick installation & coupling with a rope clamp Sheave mounted on self-lubricating bushings for efficiency ...

This brilliant device works on all dynamic single ropes from 8.9 – 11mm, but is optimised for 9.4 – 10.3mm ropes.  The unique design feature of the Grigri is its assisted braking, giving confidence to beginners & experienced climbers alike.  The Grigri 2 has a new design that improves control on descents, eliminating rope jam & sudden release to allow a very gradual release of the rope especially when abseiling or lowering a partner.  The Grigri 2 is 25% smaller & 20% lighter than the original.    Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots & pinches the rope, increasing the braking action until the rope stops sliding The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope & the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling The GRIGRI 2 is compact & ultra-light at 185 g (25 % smaller & 20 % lighter than the GRIGRI) Built with a stainless steel friction plate & cam to ensure a long life for the product For 8.9 to 11 mm single ropes (optimised for 9.4 mm to 10.3 mm ropes) Diagrams for rope installation engraved on belay device (interior & exterior) ...

This brilliant device works on all dynamic single ropes from 8.9 – 11mm, but is optimised for 9.4 – 10.3mm ropes.  The unique design feature of the Grigri is its assisted braking, giving confidence to beginners & experienced climbers alike.  The Grigri 2 has a new design that improves control on descents, eliminating rope jam & sudden release to allow a very gradual release of the rope especially when abseiling or lowering a partner.  The Grigri 2 is 25% smaller & 20% lighter than the original.    Belay technique identical to classic belay systems: both hands on the rope. A fall is stopped by tightening the hand on the free end of the rope Assisted braking: during fall arrest, the belayer holds the free end of the rope, the cam pivots & pinches the rope, increasing the braking action until the rope stops sliding The GRIGRI 2 has a new design that allows excellent control during the descent. One hand holds the rope & the other uses the handle to unlock the cam. The patented handle design allows a very gradual release of the rope. In combination with the strong braking action of the cam, it gives a great feeling of security when lowering a partner or rappelling The GRIGRI 2 is compact & ultra-light at 185 g (25 % smaller & 20 % lighter than the GRIGRI) Built with a stainless steel friction plate & cam to ensure a long life for the product For 8.9 to 11 mm single ropes (optimised for 9.4 mm to 10.3 mm ropes) Diagrams for rope installation engraved on belay device (interior & exterior) ...

The Petzl Gym Harness is a simple, adjustable harness. Usually used for group programs or beginners the Gym Harness is one size fits all & easy to adjust. Adjustable leg loops allow size to be adjusted depending on comfort desired or layers of clothing worn, & allow the harness to be put on when wearing skis or crampons Double Back buckles for easy adjustability They help prevent incorrect manipulation. Single Dyneema-reinforced tie-in point for increased durability Detachable elastic leg loop straps Leg loops & waistbelt are color coded to facilitate donning ...

Petzl Myo RXP Grey.  A truly versatile headtorch for all activities & events that can be programmed to optimise power output & lighting modes. There are three lighting modes on offer, each with lumen outputs between 13 & 141.   You can programme which mode comes on first & how much light it chucks out.   You can even programme the strobe mode to be slow,  fast or SOS.   There is also a boost switch which bumps up the lumen output to 205 for those instances when you need all the light you can get.   On the front of the lens is a flip up diffuser which changes the light pattern from a flood to a spot.   With all this light output you will need to know how your batteries are coping, so the Myo RXP has a battery level indicator which warns when the batteries are 70% & then 90% depleted.   The 3 AA batteries sit on the back of the head & you can use lithium batteries to optimize performance in the cold.   An extra over the head elastic strap is included for when you need extra stability. Fully programmable lighting modes
- min power, max power & strobe Three lighting modes each with ten power settings 3 x AA batteries Compatable with alkaline, lithium, re-chargeable Ni-MH & re-chargeable Ni-Cd batteries. IPX 4 watertight Wide angle or spot focus beam patterns Reliable & durable construction
...