Allows four telephones to be connected in parallel at different locations
Connects 4 devices in parallel
Only for analogue telephone lines, not VoIP, LAN
Bridges all pairs
Existing installations can be expanded quickly and easily allowing additional telephones to be added temporarily or permanently
Saves adding additional cable runs
Ideal for existing installations where additional cables cannot be installed easily
Please note:this device does not give four individual lines but allows four connection points to share one line.
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
Please note:these doublers are sold as single units not pairs.
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
Connects 2 devices in parallel
Bridges all pairs
Existing installations can be expanded quickly and easily allowing additional telephones to be added temporarily or permanently
Saves adding additional cable runs
2 year warranty
'Y' Adaptors allows two telephones to be connected in parallel at different locations. Please note: this device does not give two individual lines but allows two connection points to share one line. Ideal for existing installations where additional cables cannot be installed easily.
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
Please note:these doublers are sold as single units not pairs.
Our Port Doublers allow two devices to be connected using only one port of a structured cabling system. The CAT5/5e/6 cable used in a conventional Fast Ethernet network is made up of 8 conductors, 4 of which are unused. The port doubler makes use of these 4 spare conductors, to provide a second connection over a single cable run, without any loss of performance.
Port Doublers must be used in pairs by connecting one to the patch panel and the other to the wall outlet.
Connect CAT5e/6 cables without the use of a crimper or punchdown tool
Connector A: RJ-45 Plug with 28cm trailing lead
Connector B: IDC
Supports 10/100/1000Base-T Ethernet
Dimensions: 41 x 60 x 22.5mm (WxDxH)
Connect CAT5 cables without the use of a crimper or punchdown tool
Connector A: RJ-45 Plug with 28cm trailing lead
Trailing lead is 2 pair, 4 core
Connector B: IDC
Supports 10/100Base-T Ethernet
Dimensions: 29 x 39.5 x 19mm (WxDxH)
RJ45 to Toolless punch down connector
For use with 22-26 AWG CAT6 cable
Can also be used with 110 and Krone punch down tools
Colour: White
2 year warranty
Pre-assembly boots must be used before crimping the RJ-45 connector onto the cable
For cable diameters up to 6mm
Great for identification at patch panels
Pre-assembly boots must be used before crimping the RJ-45 connector onto the cable
For cable diameters up to 6mm
Great for identification at patch panels
Connects 2 devices in parallel
Bridges all pairs
Existing installations can be expanded quickly and easily allowing additional telephones to be added temporarily or permanently
Saves adding additional cable runs
2 year warranty
'Y' Adapters allows two telephones to be connected in parallel at different locations. Please note: this device does not give two individual lines but allows two connection points to share one line. Ideal for existing installations where additional cables cannot be installed easily.
This adapter allows telephones with BT connectors to be used in a structured cabling system with RJ-45 connectors. Includes capacitor to generate ring, surge protection is not required as this is already provided by most PABX systems
Voice PABX LJU - RJ-45 Tailed Adapter (VX BX)
RJ-45 Plug to 6 Way BT Socket
Colour: Beige
This adapter allows telephones with BT connectors to be used in a structured cabling system with RJ-45 connectors. Used for secondary extensions or on a PABX system when the equipment connected has its own ring detection circuit and a capacitor is not required, many modems have this
Voice Secondary LJU - RJ-45 Tailed Adapter (VS BM)
RJ-45 Plug to 6 Way BT Socket
Colour: Beige
Please note:these multipliers are sold as single units not pairs.
This handy UTP port multiplier allows four UTP/RJ45 connections to be connected to one UTP port of a structured cabling system. CAT5/5e/6 cables used in a conventional Fast Ethernet network are made up of 8 conductors. This port multiplier uses these 8 conductors to provide four separate connections over a single cable run, without any loss of performance. Its the perfect device for easily adding additional connections to an existing network.
Port Multipliers must be used in pairs by connecting one to a patch panel and the other to a wall outlet.
This adapter allows telephones with BT connectors to be used in a structured cable system with RJ-45 connectors. Includes surge protector and a capacitor to generate a ring
Voice Mastered LJU - RJ-45 Tailed Adapter (VM BM)
RJ-45 Plug to 6 Way BT Socket
Colour: Beige