Integrating data, power and USB signals into a single cable this eSATA cable connects external eSATA + power devices to an eSATA + power and USB capable controller. It also allows USB devices to be connected via the USB Type Mini B Male connection. A 1.3mm Mini 5V DC jack plug can power external USB devices such as enclosures, USB hubs etc. Compatible with the latest generation of computers and interface cards that support Power over eSATA and combined USB. The cable may be used in conjunction with our 2 Port Power over eSATA +USB PCI Express card.
This external eSATAp cable integrates both data and power signals into a single lead. It connects an external SATA hard disk or similar device to an eSATAp port. It can connect both 2.5" and 3.5" hard disks as it provides both +5VDC and +12V DC so can be used with both desktop and laptop computers (see note below).
This cable is compatible with the latest generation of computers and interface cards that support power over eSATA. The cable may be used in conjunction with our 2 Port Power over eSATAp +USB PCI Express card and Power eSATA & USB 2.0 Adapter Card.
Note: Laptops typically supply up to 5V from the eSATA port, which is suitable for use with most 2.5" HDDs and SSDs; desktop computers typically supply up to 12V, which is suitable for both 2.5" and 3.5" drives. Please check that your computer's eSATA interface port supports power before using this cable.
This external cable integrates power, SATA and USB data signals into a single cable. This allows you to use just one cable when being used with a compatible computer port and an external power over eSATA device. Ideal for use with our1 Port Power eSATA & USB 2.0 Backplate Adapterand1 Port Power eSATA & USB 2.0 Backplate Adapter.
This external eSATAp cable integrates both data and power signals into a single lead. It connects an external SATA hard disk or similar device to an eSATAp port. It can connect both 2.5" and 3.5" hard disks as it provides both +5VDC and +12V DC so can be used with both desktop and laptop computers (see note below).
This cable is compatible with the latest generation of computers and interface cards that support power over eSATA. The cable may be used in conjunction with our 2 Port Power over eSATAp +USB PCI Express card and Power eSATA & USB 2.0 Adapter Card.
Note: Laptops typically supply up to 5V from the eSATA port, which is suitable for use with most 2.5" HDDs and SSDs; desktop computers typically supply up to 12V, which is suitable for both 2.5" and 3.5" drives. Please check that your computer's eSATA interface port supports power before using this cable.
This external cable integrates power, SATA and USB data signals into a single cable. This allows you to use just one cable when being used with a compatible computer port and an external power over eSATA device. Ideal for use with our1 Port Power eSATA & USB 2.0 Backplate Adapterand1 Port Power eSATA & USB 2.0 Backplate Adapter.
This external eSATAp cable integrates both data and power signals into a single lead. It connects an external SATA hard disk or similar device to an eSATAp port. It can connect both 2.5" and 3.5" hard disks as it provides both +5VDC and +12V DC so can be used with both desktop and laptop computers (see note below).
This cable is compatible with the latest generation of computers and interface cards that support power over eSATA. The cable may be used in conjunction with our 2 Port Power over eSATAp +USB PCI Express card and Power eSATA & USB 2.0 Adapter Card.
Note: Laptops typically supply up to 5V from the eSATA port, which is suitable for use with most 2.5" HDDs and SSDs; desktop computers typically supply up to 12V, which is suitable for both 2.5" and 3.5" drives. Please check that your computer's eSATA interface port supports power before using this cable.
This external cable intergrates Data and Power in a single cable and allows connection of an eSATA + Power device and USB connectivity via the USB Mini B Male connector. Compatible with the latest generation of computers and interface cards that support Power over eSATA and combined USB.
Converts two internal SATA + USB ports to an external backplate for use with power over eSATAp devices
Supports SATA I and II transfer speeds of 1.5Gbps and 3Gbps
Supports USB speeds of up to 480Mbps
Provides 5V DC and 12V DC power for use with compatible external devices
Supplied with internal power and USB connection cables (30cm)
10 Year warranty
Multilane Bridge Board for SATA Storagealso available.
This backplate adapter card allows you to add two external power over eSATAp + USB expansion ports in a PC or server. In addition it has a 5 to 12V power supply for the eSATAp and USB ports respectively.
Connectors: 1 external shielded eSATA Female connectors to 1 x internal SATA Latching Male connectors Features latch type SATA plugs which lock into place when used with compatible latching controller or device portsCan also be used with standard non-latching SATA portsLength: 35cm
Connectors: 2 external shielded eSATA Female connectors to 2 x internal SATA Latching Male connectors Features latch type SATA plugs which lock into place when used with compatible latching controller or device portsCan also be used with standard non-latching SATA portsLength: 25cm
Connectors: 2 external shielded eSATA Female connectors to 2 x internal SATA Male connectors Features latch type SATA plugs which lock into place when used with compatible latching controller or device portsCan also be used with standard non-latching SATA portsLength: 35cm
Integrating data, power and USB signals into a single cable this eSATA cable connects external eSATA + power devices to an eSATA + power and USB capable controller. It also allows USB devices to be connected via the USB Type Mini B Male connection. A 1.3mm Mini 5V DC jack plug can power external USB devices such as enclosures, USB hubs etc. Compatible with the latest generation of computers and interface cards that support Power over eSATA and combined USB. The cable may be used in conjunction with our 2 Port Power over eSATA +USB PCI Express card.
Connectors: 1 external shielded eSATA Female connectors to 1 x internal SATA Latching Male connectors
Features latch type SATA plugs which lock into place when used with compatible latching controller or device ports
Can also be used with standard non-latching SATA ports
Length: 25cm
eSATAp Male to eSATAp Male
Supports SATA II speeds of up to 3Gbps
Supplies 5V power via USB
Colour: Black
10 Year warranty
This external cable integrates data and power in a single cable. Compatible with the latest generation of computers, interface cards and peripherals that support Power over eSATA.
The LINDY USB 3.0 & eSATA to 5 SATA Port Multiplier & RAID Adapter allows you to connect five SATA hard drives with a single eSATA or USB cable. The drives can then be configured in a variety of ways depending on the required RAID setting to appear individually or in a number of RAID array configurations
With this port multiplier, you can also connect up to five optical drives, such as DVD-RW or Blu-Ray drives, simultaneous copy & write data via the eSATA connection.
RAID 1, 3, 5, 1+0 configurations can be set via dip switches or GUI with drive status monitored by attaching LEDs to the on-board LED signal pin headers or via the bundled monitoring software. RAID errors or drive failure alerts can be emailed to an SMTP account or sounded via the on board buzzer.
The Port Multiplier can be mounted in a standard multi-bay enclosure or installed on a PCI slot L-plate with the supplied metal screws, allowing you to adapt a desktop PC case for use as an external hard drive storage enclosure
Note: Changing the RAID mode leads to a reconfiguration of the disk array and will erase all data on the hard drives!
Converts an internal SATA + USB port to an external backplate for use with power over eSATAp devices
Supports SATA I and II transfer speeds of 1.5Gbps and 3Gbps
Supports USB speeds of up to 480Mbps
Provides 5V DC and 12V DC power for use with compatible external devices
Supplied with internal power and USB connection cables (30cm)
10 Year warranty
For an external solution see33690.
This backplate adapter allows you to add an external power over eSATAp + USB expansion slot into a PC or server.
eSATA 7 Pin Male to SATA 7 Pin Male
Supports SATA II speeds of up to 3Gbit/sec
Ideal for using newer eSATA equipped external drive housings with older SATA controllers
Colour: Black
10 Year warranty
This external cable integrates power, SATA and USB data signals into a single cable. This allows you to use just one cable when being used with a compatible computer port and an external power over eSATA device. Ideal for use with our 1 Port Power eSATA & USB 2.0 Backplate Adapter and 1 Port Power eSATA & USB 2.0 Backplate Adapter.