United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
DVI
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£19.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£17.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£99.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£19.98
Available
-
DVI-D Dual Link Cable
Ideal for use as an LCD
monitor cable or DVI
projector cable Dual
Link connection supports
resolutions of up to 2560
x 1600 Connectors: DVI-D
Dual Link Male to DVI-D
Dual Link Male 10 Year
Warranty
Availability: In Stock
£17.48
Available
-
LINDY Super Long Distance
DVI cables use a
specially developed and
optimised cable material
that allows longer cable
distances than the 7.5m
maximum recommendation
laid down by the DDWG
(Digital Display Working
Group). Please note:
Maximum supported
distances and resolutions
are dependent on both the
monitor and the chipset
used in the graphics
card. Features of the
RF-BLOK shielded
design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£129.98
Available
-
DVI-I Dual Link Digital +
Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Dual Link
digital connection
supports display
resolutions of up to 2560
x 1600 Connectors: DVI-I
Dual Link Male to DVI-I
Dual Link Male Available
in lengths of 10, 15 and
20m 10 year warranty
Availability: In Stock
£104.98
Available
-
The LINDY DVI Video
Splitter allows you to
connect your computer to
8 DVI-D enabled displays
or projectors. It
supports all DVI Digital
Single Link resolutions
while superb image
quality is maintained
throughout, even when
splitting the video
signal to multiple
monitors. There is also
IC amplifier support for
each individual output
port. For even more
monitor displays you can
easily cascade multiple
video splitters together.
The LINDY DVI Video
Splitter is the ideal
solution for
presentation, training,
advertising and classroom
use. NOTE:Connectors:
Input DVI-I Female;
Output 2 x DVI-I
Female(DVI-I cables can
be used for connections,
but digital signals only
are supported, analogue
signals are not
supported!) Package
Contents 8 Port DVI-D
Video Splitter 5V DC AC
Multi Country Switching
PSU LINDY Manual
Availability: In Stock
£199.98
Available
-
Tough, moulded plastic
design High quality gold
plated connectors for
excellent signal transfer
and corrosion
resistance Supports DVI-D
Dual Link and VGA
analogue signals Can be
used with a wall plate
but is also ideal for use
in trunking to achieve
right angled bends by
joining two cables
together Connectors: DVI-I
Female port with two hex
nuts DVI-I Male port with
two thumbscrews 2 year
warranty
Availability: In Stock
£8.48
Available
-
The LINDY DVI Video
Splitter allows you to
connect your computer to
4 DVI-D enabled displays
or projectors. It
supports all DVI Digital
Single Link resolutions
while superb image
quality is maintained
throughout, even when
splitting the video
signal to multiple
monitors. There is also
IC amplifier support for
each individual output
port. For even more
monitor displays you can
easily cascade multiple
video splitters together.
The LINDY DVI Video
Splitter is the ideal
solution for
presentation, training,
advertising and classroom
use. NOTE:Connectors:
Input DVI-I Female;
Output 2 x DVI-I
Female(DVI-I cables can
be used for connections,
but digital signals only
are supported, analogue
signals are not
supported!) Package
Contents 4 Port DVI-D
Video Splitter 5V DC AC
Multi Country Switching
PSU LINDY Manual
Availability: In Stock
£104.98
Available
-
When used in conjunction
with our DVI Super Long
Distance cables, this
extender module allows
DVI-D single link digital
video signals to be sent
over distances of up to
80m. It supports
connections of up to 20m
to the display and up to
60m from the source
(using a combination of
Male to MaleSuper Long
Distance Cables and Male
to Female Super Long
Distance Extension
Cables.) Cable
Connection
Information To make the
long distance
connections, we
recommend you use a using
a combination of LINDY
Male to Male Super Long
Distance Cables and Male
to Female Super Long
Distance Extension
Cables. See our range of
Super Long Distance
Cables here.
Availability: In Stock
£34.98
Available
-
Please note:CAT5e/6
connecting cableandUTP
CAT5e Solid Core
cablearenot
included. This DVI
extender is an affordable
solution for transmitting
DVI signals over
distances of up to 90m.
It uses readily
available, low cost
CAT5e/6 cable (not
included) or UTP CAT5e
Solid Core cable cable to
make the long distance
connection and consists
of a Transmitter unit,
which plugs into the
source's DVI port, and a
receiver unit which
connects to the display
via a DVI cable.
Typical Supported
Distances &
Resolutions Distance Resolution 90m 800
x 600 70m 1024 x 768
50m 1280 x
1024 35m 1920 x 1200
Availability: In Stock
£159.84
Available
-
The LINDY DVI Gigabit
Display Adapter allows
you to connect DVI
displays to your PC via a
standard Gigabit network.
Capable of resolutions up
to 1080p or 1920 x 1080
with stereo analogue
audio the adapter also
features two USB ports
for connecting a keyboard
and mouse, as it may
also be used as a KVM
extender, and other
selected USB
devices. Installation is
simple, just install the
supplied driver and
software and then connect
the adapter to your
network to complete the
installation. Once the
installation is complete
simply open the software
and connect to the
monitor, it will then
appear on your PC like
any other locally
connected monitor,
allowing you to extend or
mirror your display. Up
to 6 displays can be
connected to an
individual PC at any
time. Display over
Gigabit Adapter for DVI,
Audio and USB via Gigabit
Ethernet Uses USB server,
USB network server and
DisplayLink technology to
transmit the appropriate
signals over LAN Supports
DVI-D resolutions up to
1920 x 1080 including
Full HD 1080p with stereo
audio via 3.5mm plugs
Uses high quality
dynamic video compression
for network transmission
via Gigabit
Ethernet Supports network
switches and other
devices such as Fiber
Optic Media Converters
for longer
distances Limited use
with Fast Ethernet
100Base-T, which
provides less bandwidth
by a factor of 10 and
leads to higher dynamic
compression and
noticeable video
compression Supports up
to 6 DVI Display over
Gigabit Adapter via a
single Gigabit Ethernet
network. The full
available bandwidth will
be used if an identical
image signal is streamed
to all six adapters. If
different image signals
are streamed, bandwidth
will be shared resulting
to greater video
compression. 2 USB ports
on the display adapter
support standard USB
mouse & keyboard,
various USB 2.0 mass
storage devices, USB
sticks and printers; USB
hubs, USB 3.0 devices
are not
supported Supported
operating systems Windows
XP/Vista/7 (32 & 64bit) 2
years warranty Package
Contents: 1x DVI display
over Gigabit Adapter with
Audio 1x Power supply 100
- 240VAC, 5VDC, with
plug adapters for Euro,
UK, US / Japan and
Australia / China 1x
UserManual 1x
Installation CD
Availability: In Stock
£149.98
Available
-
This splitter cable
allows two monitors to be
connected to a computer's
single DVI port. It's a
passive cable which
simply splits a single
DVI signal into two
without any amplification
or signal regeneration,
making it an ideal, cost
effective solution for
shorter installations.
Availability: In Stock
£12.48
Available
-
The LINDY DVI CAT6
Extender allows
high-resolution digital
video to be sent between
devices at distances of
up to 30m using low cost
CAT5e/6 network cable.
For the highest
resolutions we recommend
you use LINDY Solid Core
CAT5e Cables. The
extender uses two modules
- one transmitter and one
receiver. The transmitter
connects directly to a
DVI-D source. The
receiver connects to a
DVI-D display in the same
way. Between the two
modules, a low cost
CAT5e/6 cable is used to
transmit the video
signals. The Extender
supports resolutions up
to 1680x1050 or 1280x1024
for distances up to 20m
using high quality Cat.6
UTP or PiMF (S/FTP)
cable. Resolutions of
1920x1200 or 1920x1080,
1080p are supported up to
15m usingLINDYSolid Core
CAT5e
Cables. Resolutions up
to 1024x768 are supported
up to 30m using highest
quality Cat.6a PiMF
(S/FTP) patch cables or
special made solid core
installation
cable. Additional
Requirements: RJ-45
patch cable: 1 x CAT5e/6
UTP Cable Package
Contents Transmitter and
Receiver Units LINDY
Manaul
Availability: In Stock
£39.98
Available
-
This high quality coupler
can be used to connect
two DVI cables together
for extended distances.
It features two female
DVI connectors which are
gold plated for excellent
conductive ability and
resistance to tarnishing
and corrosion.
Availability: In Stock
£7.98
Available
-
Compact moulded plastic
construction DVI-I Male
to DVI-I Female Gold
plated connectors &
contacts Internally
shielded with copper
foil Supports DVI
Analogue / DVI Digital
Single & Dual Link
signals Dimensions: 42 x
27 x 16mm (WxDxH) Colour:
Black 10 Year warranty
Availability: In Stock
£7.98
Available
-
Easy to set up and
install the compact LINDY
LC Fibre Optic DVI-D
Extender is the most cost
effective, high quality
solution on the market
for sending DVI-D signals
over incredible
distances. Send DVI-D
signals without
compression or any
degradation over standard
LC duplex multimode
(50/125m) fibre cable up
to 500m (not included) or
up to an incredible 1500m
using a LC duplex
singlemode (9/125m) fibre
optic cable. Unlike
other solutions, the
LINDY Fibre Optic DVI-D
Extender uses just one
duplex fibre cable to
reach such great lengths,
so no additional cables
are required. DVI-D
control over a single
cable! The extender
system comprises two
modules, a transmitter
and a receiver, which
are connected directly to
both the DVI-D source and
display. The modules are
then connected together
using a single, standard
'off the shelf' LC Fibre
cable fibre optic cable
(not included).
Availability: In Stock
£499.98
Available
-
*Remote control requires
ourInfra red kit(sold
separately) The LINDY
Fibre Optic DVI-D
Extender is the most high
performance solution on
the market for sending
DVI-D signals over
incredible distances.
Using a standard SC
duplex multimode (50/125)
fibre optic cable (not
included) to make the
long distance connection,
the DVI-D Extender
provides full support for
computer DVI-D Single
Link and HDTV DVI-D
signals, RS-232 and IR
remote control. Unlike
other manufacturer's
solutions, the LINDY
Fibre Optic DVI-D
Extender uses just one
duplex fibre cable - no
additional cables are
required for RS-232 or IR
remote control. DVI-D,
RS-232 and IR remote
control over a single
cable! The extender
system comprises two
modules, a transmitter
and a receiver, which
are connected to both the
DVI-D source and display
using standard DVI-D
cables of up to 5m. The
modules are then
connected together using
a single, standard 'off
the shelf' SC
50/125mduplex multimode
cable of up to 300m in
length (fibre optic cable
is not
included) Additional
Requirements Fibre
Optic Patch cable: SC
duplex multimode cable
(50/125m)(of required
length up to 300m) Two
DVI-D cables for
connecting to source and
display: DVI-D Male to
Maleor Premium Gold
DVI-D(up to 5m in
length) LINDY Infra red
kit for using IR remote
controls Package
Contents 1 x Fibre Optic
DVI-D Transmitter Unit 1
x Fibre Optic DVI-D
Receiver Unit 2 x Multi
Country Power Supplies 8
x Rubber Feet (if not
installed) LINDY Manual
Availability: In Stock
£658.98
Available
-
Tough, chrome plated
metal construction
Supports DVI-D Dual Link
and VGA analogue signals
Can be used with a wall
plate but is also ideal
for use in trunking to
achieve right angled
bends by joining two
cables together
Connectors: DVI-I
Female port with two hex
nuts 2 year warranty
Availability: In Stock
£19.98
Available
-
The LINDY Fibre Optic
DVI-D Dual Link Extender
is the most high
performance solution on
the market for sending
DVI-D Dual Link signals,
up to 1600p,
un-compressed over
incredible distances.
Using standard LC quad
(x1) or duplex (x2)
multi-mode (50/125) fibre
optic cables to make the
long distance connection,
the DVI-D Extender
provides full support for
computer DVI-D Dual Link
and HDTV DVI-D signals,
analogue audio and
RS-232. The extender
system comprises two
modules, a transmitter
and a receiver, which
are connected to both the
DVI-D source and display
using standard DVI-D
cables of up to 5m. The
modules are then
connected together using
a single LC quad or two
LC 50/125m duplex
multimode cables of up to
500m in length (fibre
optic cable is not
included). Package
Contents 1 x Fibre
Optic DVI-D Dual Extender
Unit 1 x Fibre Optic
DVI-D Dual Receiver
Unit 8 x Rubber Feet 2 x
Multi Country Power
Supplies LINDY Manual &
EDID QIG
Availability: In Stock
£1799.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as
one Important! Please
note that cable lengths
over 7.5m are above the
recommended length laid
down by the DDWG
organisation who
developed the
specification. This
factor also depends on
the hardware combination
of graphics card and
monitor as to how far
this distance can be
exceeded.
Availability: In Stock
£53.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as
one Important! Please
note that cable lengths
over 7.5m are above the
recommended length laid
down by the DDWG
organisation who
developed the
specification. This
factor also depends on
the hardware combination
of graphics card and
monitor as to how far
this distance can be
exceeded.
Availability: In Stock
£53.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£31.98
Available
-
Our Fibre Optic Hybrid
DVI-D cables are the
perfect solution for
easily extending DVI
digital signals over
incredible distances.
Fibre-optic technology
allows transmission
distances that far exceed
the maximum supported by
standard copper only
cables. These cables
feature H-PCF
(Hard-Polymer Clad Fibre)
glass fibres for sending
digital display signals.
The Transmitter and
Receiver modules are each
equipped with standard
DVI-D Male connectors for
connecting to the source
(e.g. DVI graphics card)
and the display. The
modules are connected
together by a fibre and
copper solution. Note:
This product will work
with most graphic cards &
displays on the market
but certain models do not
output power through the
DVI port. This will
require the use of the
optional PSU. The power
requirements of the cable
are 5V 2A.
Availability: In Stock
£299.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£39.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£39.98
Available
-
DVI-D Dual Link Cable
Ideal for use as an LCD
monitor cable or DVI
projector cable Dual
Link connection supports
resolutions of up to 2560
x 1600 Connectors: DVI-D
Dual Link Male to DVI-D
Dual Link Male 10 Year
Warranty
Availability: In Stock
£21.48
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£23.98
Available
-
The DVI-D Video Splitter
supports all DVI Digital
Dual Link resolutions.
Superb image quality is
maintained throughout,
even when splitting the
video signal to multiple
monitors. For more
monitor displays simply
cascade multiple video
splitters together,
making the LINDY DVI-D
Video Splitter the ideal
solution for
presentation, training,
advertising and classroom
use. Note:DVI-I cables
can be used for
connections, but digital
signals are only
supported, analogue
signals are not
supported. Package
Contents 2 Port DVI-D
Dual Link Video
Splitter 5V DC Multi
Country PSU LINDY
Manual Rubber feet
Availability: In Stock
£149.98
Available
-
Our Fibre Optic Hybrid
DVI-D cables are the
perfect solution for
easily extending DVI
digital signals over
incredible distances.
Fibre-optic technology
allows transmission
distances that far exceed
the maximum supported by
standard copper only
cables. These cables
feature H-PCF
(Hard-Polymer Clad Fibre)
glass fibres for sending
digital display signals.
The Transmitter and
Receiver modules are each
equipped with standard
DVI-D Male connectors for
connecting to the source
(e.g. DVI graphics card)
and the display. The
modules are connected
together by a fibre and
copper solution. Note:
This product will work
with most graphic cards &
displays on the market
but certain models do not
output power through the
DVI port. This will
require the use of the
optional PSU. The power
requirements of the cable
are 5V 2A.
Availability: In Stock
£1019.98
Available
-
DVI-I Dual Link Digital +
Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Dual Link
digital connection
supports display
resolutions of up to 2560
x 1600 Connectors: DVI-I
Dual Link Male to DVI-I
Dual Link Male Available
in lengths of 10, 15 and
20m 10 year warranty
Availability: In Stock
£78.98
Available
-
Compact moulded plastic
construction DVI-D Male
to DVI-I Female Gold
plated connectors &
contacts Internally
shielded with copper
foil Supports DVI Digital
Single & Dual Link
signals Dimensions: 42 x
27 x 16mm (WxDxH) Colour:
Black 10 Year warranty
Availability: In Stock
£7.98
Available
-
LINDY Super Long Distance
DVI cables use a
specially developed and
optimised cable material
that allows longer cable
distances than the 7.5m
maximum recommendation
laid down by the DDWG
(Digital Display Working
Group). Please note:
Maximum supported
distances and resolutions
are dependent on both the
monitor and the chipset
used in the graphics
card. Features of the
RF-BLOK shielded
design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£154.98
Available
-
DVI-D Single Link Cable
For use as an LCD
monitor cable or DVI
projector cable Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-D
Single Link Male to DVI-D
Single Link Male 10 Year
Warranty
Availability: In Stock
£10.98
Available
-
DVI-D Single Link Cable
For use as an LCD
monitor cable or DVI
projector cable Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-D
Single Link Male to DVI-D
Single Link Male 10 Year
Warranty
Availability: In Stock
£19.98
Available
-
DVI-I Single Link Digital
+ Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-I
Single Link Male to DVI-I
Single Link Male Also
available in lengths of
2, 3 and 5m. 10 year
warranty
Availability: In Stock
£7.98
Available
-
DVI-I Single Link Digital
+ Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-I
Single Link Male to DVI-I
Single Link Male Also
available in lengths of
1, 2 and 5m. 10 year
warranty
Availability: In Stock
£14.48
Available
-
DVI-I Single Link Digital
+ Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-I
Single Link Male to DVI-I
Single Link Male Also
available in lengths of
1, 3 and 5m. 10 year
warranty
Availability: In Stock
£11.48
Available
-
DVI-D Single Link Cable
Ideal for use as an LCD
monitor cable or DVI
projector cable Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-D
Single Link Male to DVI-D
Single Link Male 10 Year
Warranty
Availability: In Stock
£14.98
Available
-
DVI-D Single Link Cable
For use as an LCD
monitor cable or DVI
projector cable Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-D
Single Link Male to DVI-D
Single Link Male 10 Year
Warranty
Availability: In Stock
£39.98
Available
-
DVI-D Single Link Cable
Ideal for use as an LCD
monitor cable or DVI
projector cable Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-D
Single Link Male to DVI-D
Single Link Male 10 Year
Warranty
Availability: In Stock
£7.98
Available
-
Our Fibre Optic Hybrid
DVI-D cables are the
perfect solution for
easily extending DVI
digital signals over
incredible distances.
Fibre-optic technology
allows transmission
distances that far exceed
the maximum supported by
standard copper only
cables. These cables
feature H-PCF
(Hard-Polymer Clad Fibre)
glass fibres for sending
digital display signals.
The Transmitter and
Receiver modules are each
equipped with standard
DVI-D Male connectors for
connecting to the source
(e.g. DVI graphics card)
and the display. The
modules are connected
together by a fibre and
copper solution. Note:
This product will work
with most graphic cards &
displays on the market
but certain models do not
output power through the
DVI port. This will
require the use of the
optional PSU. The power
requirements of the cable
are 5V 2A.
Availability: In Stock
£599.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£29.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£23.98
Available
-
*Remote control requires
ourInfra red kit(sold
separately) The LINDY
Fibre Optic DVI-D
Extender is the most high
performance solution on
the market for sending
DVI-D signals over
incredible distances.
Using a standard SC
duplex single mode
(9/125*Remote control
requires ourInfrared
Kit(sold separately))
fibre optic cable (not
included) to make the
long distance connection,
the DVI-D Extender
provides full support for
computer DVI-D Single
Link and HDTV DVI-D
signals, RS-232 and IR
remote control. Unlike
other manufacturer's
solutions, the LINDY
Fibre Optic DVI-D
Extender uses just one
duplex fibre cable - no
additional cables are
required for RS-232 or IR
remote control. DVI-D,
RS-232 and IR remote
control over a single
cable! The extender
system comprises two
modules, a transmitter
and a receiver, which
are connected to both the
DVI-D source and display
using standard DVI-D
cables of up to 5m. The
modules are then
connected together using
a single, standard SC
duplex single mode fibre
cable of up to 5km in
length (fibre optic cable
is not
included) Package
Contents 1 x Transmitter
Unit 1 x Receiver Unit 2
x multi-country PSU,
5VDC, 2.6A Manual 8 x
rubber feet (if not
installed)
Availability: In Stock
£999.98
Available
-
Our Fibre Optic Hybrid
DVI-D cables are the
perfect solution for
easily extending DVI
digital signals over
incredible distances.
Fibre-optic technology
allows transmission
distances that far exceed
the maximum supported by
standard copper only
cables. These cables
feature H-PCF
(Hard-Polymer Clad Fibre)
glass fibres for sending
digital display signals.
The Transmitter and
Receiver modules are each
equipped with standard
DVI-D Male connectors for
connecting to the source
(e.g. DVI graphics card)
and the display. The
modules are connected
together by a fibre and
copper solution. Note:
This product will work
with most graphic cards &
displays on the market
but certain models do not
output power through the
DVI port. This will
require the use of the
optional PSU. The power
requirements of the cable
are 5V 2A.
Availability: In Stock
£439.98
Available
-
This adapter enables
projectors with a P&D
connector (also known as
M1, M1-DA or EVC) to
connect to the DVI and
USB ports of your
computer. The USB
connection is used to
supply commands from the
projector's remote
control to the computer -
allowing you to scroll
through PowerPoint
presentations etc., and
to update the firmware of
certain projectors.
Availability: In Stock
£19.98
Available
-
The LINDY DVI Video
Splitter allows you to
connect your computer to
2 DVI-D enabled displays
or projectors. It
supports all DVI Digital
Single Link resolutions
while superb image
quality is maintained
throughout, even when
splitting the video
signal to multiple
monitors. There is also
IC amplifier support for
each individual output
port. For even more
monitor displays you can
easily cascade multiple
video splitters together.
The LINDY DVI Video
Splitter is the ideal
solution for
presentation, training,
advertising and classroom
use. NOTE: Connectors:
Input DVI-I Female;
Output 2 x DVI-I
Female(DVI-I cables can
be used for connections,
but digital signals only
are supported, analogue
signals are not
supported!) Package
Contents 2 Port DVI-D
Video Splitter 5V DC AC
Multi Country Switching
PSU LINDY Manual
Availability: In Stock
£79.98
Available
-
Easily adapt DVI ports or
join DVI cables Suitable
for use with flat screen
TVs and monitors to allow
easier cable
access Tough, moulded
plastic design High
quality gold plated
connectors for excellent
signal transfer and
corrosion resistance All
pins wired for maximum
compatibility with a
range of cables Ideal for
use in trunking to
achieve right angled
bends by joining two
cables
together Connectors: 1 x
DVI-I Female with hex
nuts to 1 x DVI-I Male
with thumbscrews
Availability: In Stock
£8.48
Available
-
Tough, chrome plated
metal construction
Supports DVI-D Dual Link
and VGA analogue signals
Can be used with a wall
plate but is also ideal
for use in trunking to
achieve right angled
bends by joining two
cables together
Connectors: DVI-I
Female port with two hex
nuts DVI-I Male port
with two thumbscrews
Availability: In Stock
£19.98
Available
-
Ideal for connecting two
DVI cables around a tight
corner Suitable for use
with flat screen TVs and
monitors to allow easier
cable access Tough,
moulded plastic
design High quality gold
plated connectors for
excellent signal transfer
and corrosion
resistance All pins wired
for maximum compatibility
with a range of
cables Ideal for use in
trunking to achieve right
angled bends by joining
two cables
together Connectors: 1 x
DVI-I Female with hex
thumbscrews to 1 x DVI-I
Female with thumbscrews
Availability: In Stock
£8.48
Available
-
DVI-D Dual Link Cable
Ideal for use as an LCD
monitor cable or DVI
projector cable Dual
Link connection supports
resolutions of up to 2560
x 1600 Connectors: DVI-D
Dual Link Male to DVI-D
Dual Link Male 10 Year
Warranty
Availability: In Stock
£26.98
Available
-
LINDY Super Long Distance
DVI cables use a
specially developed and
optimised cable material
that allows longer cable
distances than the 7.5m
maximum recommendation
laid down by the DDWG
(Digital Display Working
Group). Please note:
Maximum supported
distances and resolutions
are dependent on both the
monitor and the chipset
used in the graphics
card. Features of the
RF-BLOK shielded
design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£99.98
Available
-
DVI-I Dual Link Digital +
Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Dual Link
digital connection
supports display
resolutions of up to 2560
x 1600 Connectors: DVI-I
Dual Link Male to DVI-I
Dual Link Male Available
in lengths of 10, 15 and
20m 10 year warranty
Availability: In Stock
£59.98
Available
-
Our Fibre Optic Hybrid
DVI-D cables are the
perfect solution for
easily extending DVI
digital signals over
incredible distances.
Fibre-optic technology
allows transmission
distances that far exceed
the maximum supported by
standard copper only
cables. These cables
feature H-PCF
(Hard-Polymer Clad Fibre)
glass fibres for sending
digital display signals.
The Transmitter and
Receiver modules are each
equipped with standard
DVI-D Male connectors for
connecting to the source
(e.g. DVI graphics card)
and the display. The
modules are connected
together by a fibre and
copper solution. Note:
This product will work
with most graphic cards &
displays on the market
but certain models do not
output power through the
DVI port. This will
require the use of the
optional PSU. The power
requirements of the cable
are 5V 2A.
Availability: In Stock
£869.98
Available
-
The DVI-D Video Splitter
supports all DVI Digital
Dual Link resolutions.
Superb image quality is
maintained throughout,
even when splitting the
video signal to multiple
monitors. For more
monitor displays you can
cascade multiple video
splitters together,
making the LINDY DVI-D
Video Splitter the ideal
solution for
presentation, training,
advertising and classroom
use. Note:DVI-I cables
can be used for
connections, but digital
signals are only
supported, analogue
signals are not
supported. Package
Contents 4 Port DVI-D
Dual Link Video
Splitter 5V DC Multi
Country PSU LINDY
Manual Rubber feet
Availability: In Stock
£209.98
Available
-
The DVI Switch allows
audio & video from up to
4 DVI devices to be
connected to a single DVI
equipped HDTV, projector
or TFT monitor. With
support for display
resolutions of up to
1080p, it's ideal for
use with high definition
equipment such as in a
home cinema installation.
Switching between devices
is easily done using the
supplied IR remote
control or the devices
top panel push
button. Connecting HDMI
equipped devices If your
devices are equipped with
an HDMI connector you can
use DVI to HDMI cables or
adapters. Please be aware
however, that the DVI
interface supports
display signals only.
Therefore, you will need
to make separate audio
connections from your
source to your
display/amplifier
etc. Package
Contents: 4 Port DVI
Audio/Video Switch IR
Remote control (inc
battery) 5 x 3.5mm Male
to Female cables,
0.20m Multi-country
PSU User manual
Availability: In Stock
£67.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£71.98
Available
-
LINDY Super Long Distance
DVI cables use a
specially developed and
optimised cable material
that allows longer cable
distances than the 7.5m
maximum recommendation
laid down by the DDWG
(Digital Display Working
Group). Please note:
Maximum supported
distances and resolutions
are dependent on both the
monitor and the chipset
used in the graphics
card. Features of the
RF-BLOK shielded
design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£71.98
Available
-
DVI-I Single Link Digital
+ Analogue Cable For use
with all standard digital
TFT (Thin Film
Transistor)/LCD (Liquid
Crystal Display) Flat
Panel Displays Single
Link connection supports
resolutions of up to 1920
x 1200 Connectors: DVI-I
Single Link Male to DVI-I
Single Link Male Also
available in lengths of
1, 2 and 3m. 10 year
warranty
Availability: In Stock
£19.98
Available
-
DVI-D Dual Link Cable
Ideal for use as an LCD
monitor cable or DVI
projector cable Dual
Link connection supports
resolutions of up to 2560
x 1600 Connectors: DVI-D
Dual Link Male to DVI-D
Dual Link Male 10 Year
Warranty
Availability: In Stock
£14.48
Available
-
Features of the RF-BLOK
shielded
design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£129.98
Available
-
Features of the RF-BLOK
shielded design: Reduced
interference from one
piece EMI
(Electromagnetic
Interference)/RFI (Radio
Frequency Interference)
shield Increased
insulation resistance up
to 25% No soldering
requirements as
interconnect design needs
no 360 degree soldering -
eliminating the
possibility of human
error and/or cracking of
the solder that causes
grounding intermittence
and the use of the most
hazardous waste material
- soldering flux Tight
fit of internal wires as
there is no inner
mould No requirement of
ferrite cores as signal
loss and degradation are
greatly reduced giving
enhanced signal
sharpness. Without the
ferrite cores the cable
is less stressed and more
flexible Smaller overall
dimensions which allows
more room behind the host
or peripheral Increased
connector and mating
strength - the 4 point
reinforcement tabs on the
RF-BLOK, attached to the
connector, strengthens
the pair as one
Availability: In Stock
£16.98
Denmark