This PCIe add on card expands your computer and provides two SATA-II ports and one PATA UDMA-6 (ATA-133) port. The card supports RAID 0, 1, 0+1 and JBOD functions. Ideal for both adding additional high speed storage devices inside your computer and as an external drive enclosure when using the external eSATA connector.
SATA Connectors
This PCIe add on card expands your computer and provides two power over eSATA ports. Ideal for adding additional high speed external storage devices. Special combination cables are available in 0.5m and 1.0mlengths for direct connection to either 2.5" or 3.5" SATA hard drives.
Bus Type: X1 PCI-Express
Internal Connector: 2 x SATA II Female
Supports RAID levels 0, 1, 0+1, 5, 10 and JBOD
Port Multiplier and NCQ (Native Command Queuing) support
Supports "Non booting" drivers for Mac OS X v.10.4
Supplied with extra low profile bracket
Software compatibility: 32/64 bit support for Windows 2000/XP/Vista/Windows 7/8/Server 2003, 2008, Linux, Supports 'Non booting' drivers up to Mac OS v.10.6
Warranty: 2 years
To use RAID 5 function requires an enclosure with a minimum of 3 x HDD and a SATA port Mulitplier, part number51136.
Bus Type: PCI-Express (PCI-e x1)
Speed: SATA III (6Gbit/sec)
External connectors: 2 x eSATA Female
Port Multiplier and Native Command Queuing support
Supports serial ATA 2.6 specification
Supports SATA III transfer speeds of 1.5Gbps, 3.0Gbps and 6.0Gbps
Chipset: Marvell 9128
Standard and low profile back plates supplied
Pin header for drive activity LEDs
Software Compatibility: Windows Vista (32/64 bit), XP/Server 2003/8 (32/64 bit) Windows 7/8
2 Year warranty
PCI-Express 3.0 (6Gb/s) PCI-e x8 Card
8 internal SAS/SATA ports by two SFF-8087 connectors
Compliant with PCI Express Specification, Rev. 2.0
Compliant with Serial Attached SCSI 2.0 (SAS 2.0) Specification
Compliant with Serial ATA Rev. 3.0 (6 Gbps) Specification
Supports auto-detection of SAS or native SATA device
Supports SAS/SATA transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
Supports SAS Multiplexing
Supports wide SAS ports
Supplied with standard and low-profile backplates
Connector: 8 internal SAS/SATA ports by two SFF-8087 connectors
Software compatibility: 32/64 bit support for Windows 2000/XP/Vista/Windows 7/Server 2003, 2008
2 Year warranty
This Multilane Controller allows you to connect up to 8 SATA/SAS 6Gbps drives to your PCIe based PC/Server.
The LINDY 2 port SATA 6Gbps PCIe card with HyperDuo support helps you to combine the speed of a SSD with the capacity of a HDD.
HyperDuo enables two modes: Safe Mode and Capacity Mode. Safe Mode provides optimal data protection by mirroring data from the SSD to the hard disk for maximum resiliency. Capacity Mode augments SSD and HDD capacity for the most cost-effective configuration.
Bus Type: 32 Bit PCI
Speed: Serial ATA-150
I/O Address: "Plug & Play"
IRQ Selection: "Plug & Play"
Internal Connector: 2 x SATA Female
Supports 2 independent Serial ATA channels
Supports Serial ATA 1st Generation Data Rates 1.5Gb/s
Compliant with PCI specifications, Revision 2.2 (5V & 3.3V)
Integrated PCI DMA engines
RAID Function Level 0 and 1 (Mirror and Stripe Set)
Standard and Low Profile PC Back Plates included
Software Compatibility: Windows 98SE/ME/2000/XP/Vista/Windows 7/8/Server 2003, 2008
2 year warranty
Small form factor PCI Express card with 2 x SFF-8088 connectors
PCI-Express SAS / SATA 6Gbit/sec 8-port controller
8 x external SAS / SATA 6Gbit/sec ports via 2 x SFF-8088 connectors
Supports SAS / SATA data transfer rates: 1.5, 3 and 6Gbit/sec
Suitable for standard and low profile slot. Low profile bracket included
Operating Systems: Windows XP / Vista / 7 / Server 2003, 2008
Connect up to eight SAS or SATA drives via two external mini-SAS (SFF-8088) connectors with supports for speeds up to 6Gbit/sec when installed into PCI-Express 2.0 slots. This controller is ideal for connecting storage system with mini-SAS or multilane (SFF- 8487) interfaces or for installing in desktops, small form factor systems, rack mount system and other computing equipment.
Bus Type: PCI-Express (PCI-e x1)
Speed: SATA III (6Gbit/sec)
Internal connectors: 1 x SATA Female
External Connectors: 1 x eSATA Female
Port Multiplier and Native Command Queuing support
Software Compatibility: Windows Vista (32/64 bit), XP/Server 2003/8 (32/64 bit) Windows 7/8
Chipset: Marvell 9128
Standard and low profile back plates supplied
Pin header for drive activity LEDs
2 year warranty
Bus Type: 32 bit, 33/66 MHz fully compliant PCI host interface
Data transfer rate: up to 3 Gbit/sec
Backward compatible to Serial ATA 1.0a specifications
Port Multiplier and NCQ (Native Command Queuing) support
Supports Raid functions 0, 1, 5 and 10 (Optional, driver included)
Hot plugging support
Internal Connector: 4 x SATA II Female
Supports 4 independent SATA channels
Chipset: Silicon Image SIL3124-2
Software Compatibility: Win 2000/NT4.0/XP/Vista/7/Server 2003, 2008; Mac OSX10.6 ~ Snow Leopard(non-RAID) and Linux
Bus Type: 32 Bit PCI
Speed: Serial ATA-150
I/O Address: "Plug & Play"
IRQ Selection: "Plug & Play"
Internal Connector: 4 x Serial-ATA Female
Supports 4 independent Serial-ATA channels
"Plug & Play" installation
Standard and low profile PC back plates included
Compatible with Windows 98SE/ME/2000/NT/XP/Vista/7
The 4 independent Serial-ATA ports each support Serial-ATA data rates of 1.5Gigabits/sec while the card can be configured for RAID levels 0, 1 and 0+1.
Bus Type: PCIe x8 (8 lane)External Connectors: 4 x eSATA FemaleSupports RAID levels 0, 1, 0+1, 5 and JBODPort Multiplier and NCQ (Native Command Queuing) supportSupports SATA II data transfer rate up to 3 Gbit/s per channel Supports four independent SATA II channelsIntegrated cooling fanOn board jumper to enable or disable the on board SATA BIOSHot Pluggable drive support Silicon image chipset Sil3124 Software Compatibility: Windows 2000/XP/Vista/Windows 7/Server 2003 and Linux, Supports 'Non booting' drivers up to Mac OS v.10.62 Year warranty
Bus Type: PCI Express x8 (8 Lane)Connects up to 4 external SATA II devicesAlso compatible with 1.5Gbps SATA 1.0a drivesSpeed: Up to 3Gbps for each channel Port Multiplier and NCQ (Native Command Queuing) supportSupports RAID levels 0, 1, 0+1, 5 and JBODSupplied with standard and low-profile backplates Connector: SATA 4x Multilane Infiniband (screw type)Software compatibility: 32/64 bit support for Windows 2000/XP/Vista/Windows 7/Server 2003, 2008, Linux, Supports 'Non booting' drivers up to Mac OS v.10.62 Year warranty
Bus Type: 32 Bit PCI
Internal Connector: 4 x SATA Female
Supports RAID levels 0, 1, 0+1, 5 and JBOD
Port Multiplier and NCQ (Native Command Queuing) support
Compliant with PCI Spec 2.3, 32-bit slot, 5V or 3.3V slot
Standard and Low Profile back plates included
Software Compatibility: Windows NT/2000/XP/Vista/Windows 7/Server 2003, 2008 and up to Mac OS 10.6 and Linux
2 year warranty
This PCI add on card expands your computer to provide two SATA 1.0a ports and one PATA UDMA-6 (ATA-133) port. The card supports RAID 0, 1, 0+1 and JBOD functions. Ideal for both adding additional storage devices inside your computer and as an external drive enclosure when using the external eSATA connector.
SATA Connectors