The Fitzroy Mitt is an ideal mitt for lower level expedition or backcountry skiing. The outer mitt is filled with PrimaLoft Gold that has been encased in a shell of Dirlite Loft fabric. Drilite Loft has a PU coating that provides a 1500mm hydrostatic head to keep insulation dry in wetter conditions. Dont worry if the water manages to get through the outer fabric; Primaloft Gold is virtually unaffected by water and still does an awesome job at keeping your hands warm. The palm is made from Pittarads Armortan Goatskin which is supple yet durable. For ease of use M.E have fitted the opening of the mitt with a one handed draw cord so there is less faff. It gets better, because inside this outer mitt is and inner mitt! This inner mitt I speak of is made out of a softshell fabric for a close yet stretchy fit. There is more, this mitt is lined with fibre pile for added warmth and it has has another leather palm. To keep this inner mitt free of snow and things, the Fitzroy has an extended gauntlet with a wide opening so you can get you jacket sleeve tucked safely inside. Then to decrease the chance of anything getting in; there is a Hypalon spindrift tab that can be closed for a secure seal, keeping your hands nice and dry. DRILITE Loft outer; highly water resistant, windproof and exceptionally breathable PRIMALOFT One insulation in outer mitt Pittards Armortan Goatskin palm Extended gauntlet design with extra wide opening Hypalon spindrift tabs can be closed to keep inner glove dry Removable Softshell inner mitt with Lobster finger, fibre pile lining and leather palm Single-handed drawcord closure
The Rab Alliance glove is a tough durable and very versatile modular glove system. It features a Primaloft insulated and eVENT waterproofed, very tough outer glove and a Primaloft insulated inner glove that can be used independently or together depending on the conditions. The outer glove is constructed from Rab’s own Matrix DWS durable nylon stretchy softshell fabric and reinforced on the palm, fingers and knuckles with Pittards Amortan leather. Amortan leather is made super durable by encasing the natural fibres in microscopic ceramic armour plates thus preventing wear from surface contact and materials. As well as the Amortan treatment this quality leather also features Innovative Grip Technology; this is a polymer infused into the surface of the leather to increase grip without compromising dexterity. These technological fabrics are backed up by the reliable and durable eVENT waterproof and breathable membrane. The outer provides protection and supreme Primaloft insulation and is lined with a Bemberg brushed lining making it a perfect mountain work glove or for use with ice tools when you need the dexterity. The inner glove is insulated with Primaloft synthetic insulation and covered with Pertex Microlight fabric to provide wind-proofing and water resistance. Thanks to the fantastic performance of the inner gloves can be used on their own if the conditions are not extreme. Should these gloves get wet they will continue to provide some warmth and will dry very quickly. Combine these two gloves and you have a full on winter mountaineering system capable of dealing with pretty much anything the UK or the Alps can throw at you. Outer Glove Matrix DWS outer fabric eVENT waterproof insert Primaloft insulation Bemberg lining Wrap around Pittards Amortan leather palm Innovative Grip Technology on palm Reflective print Drawcord closure Inner Glove Pertex Microlight fabric Primaloft insulation Bemberg lining Hang loop
The Punisher Glove from Black Diamond offers the perfect balance of warmth, protection and dexterity. This is BDs go-to ice glove for hard climbing in variable weather conditions. With enough comfort to climb WI5, enough warmth to belay and enough dexterity to tie knots in freezing temps, the Black Diamond Punisher is the go-to glove for long days, hard climbing and variable conditions. Built with highly durable, abrasion-resistant materials and an articulated fit, the Punisher performs through season after season of winter abuse. A fixed, waterproof BDry liner protects against wet ice and the EVA padding shields you from shattered plates and accidental knuckle bashing. Fixed lining with 100% waterproof BDry insert Abrasion-resistant, woven nylon shell with 4-way stretch Fixed 100 g fleece lining Goat-leather palm, palm patch and capped fingers Compression-molded EVA padding on knuckles for impact protection Ice-tool specific pre-curved fit and articulated fingers provide a comfortable, sure grip
The mens Assault Glove from Mountain Equipment. Gore-Tex lined so they are fully waterproof, windproof yet breathable. The palms, fingers, thumbs and outer wrists are constructed out of cowhide for grip and durability whilst climbing and mountaineering. The fingers are pre-curved and the thumb is made from a 3-part build method to aid dexterity, while the knuckles and fore-fingers have been been fitted with a stretch panel to help lessen the restriction of movement, that you might get with other gloves. The Majority of the cuff and thumb have a durable Nylon outer, again to keep in line with the over all rugged use that this glove was intended for. If youre thinking, Yeah, all this is great, but how warm are they? Baring in mind I have already said they are Gore-Tex lined making them waterproof and windproof, they also fleece lined for warmth without all the bulk, and like any descent mountaineering glove they have a one-handed drawcord closure so there is less faff. GORE-TEX lining is waterproof, windproof and highly breathable Cowhide leather palm and fingers for grip and durability Rugged Nylon outer Stretch panel over back of hand for improved dexterity Pre-curved fingers and 3-part thumb for dexterity Roll-tip fingers for added durability Fleece lined for warmth without bulk Single-handed drawcord closure
The Pro Shell Mitt from Mountain Equipment is a glove of 2 parts. The first part being the fully weather protective outer made from a fully taped Gore-Tex Pro shell outer; super breathable fabric that will keep out wind rain and snow. The single hand operated drawcord closure seal the mitt nicely and the durable Hypalon palm is hard wearing and grippy; you also have a nice soft thumb patch for you to wipe your nose drips on. The inner is a box construction fibre pile mitt that insulates your hand, wicking away sweat so it can be moved out of the glove through the Gore-Tex Pro shell membrane. Versatile, warm and great for thing like skiing and low level expeditions. 3-layer GORE-TEX fabric Fully taped construction Hypalon reinforced palm Soft nose wipe on thumb Single-handed drawcord closure Removable fibre pile inner mitt with box wall construction
The Kingpin is Black Diamonds version of a classic all-leather work glove. They havent been designed to a super warm glove, they are simply just a durable glove with a fleece liner; great in mild weather. The supple yet durable full goat leather shell provides a great protective layer. Full goat leather shell with goat-leather palm patch Fixed 100 g fleece lining Short cuff with hook-and-loop closure
The Kingpin is Black Diamonds version of a classic all-leather work glove. They havent been designed to a super warm glove, they are simply just a durable glove with a fleece liner; great in mild weather. The supple yet durable full goat leather shell provides a great protective layer. Full goat leather shell with goat-leather palm patch Fixed 100 g fleece lining Short cuff with hook-and-loop closure
The Whitby Hand Warmer is great for any winter activity. Its sleek and compact design allows it to fit easily into any pocket, and in some cases you can slide it into your gloves. The Hand Warmer uses normal lighter fluid to produce more than 10 times the heat as chemical or fuel rod alternative. Whitby say the the hand warmer lasts up to 12 hours on one 0.4oz fill, personally I have had my branded alternative burning for nearly 24 hours. The hand warmer contains wadding that absorbs the lighter fuel so it wont leak out onto you clothes or pocket contents. After filling, replace the burning unit wait a few moments before igniting with a lighter. Dont worry you wont be putting a lit flame into your pocket, the burning unit is platinum-catalyzed glass fiber; this will glow red as it burns the fumes that seep out of the main body of the hand warmer. The burning unit will need replacing from time to time but as far as hand warmers go this one is easy to use and last ages! Great for use on the mountains or any outdoor activity in really cold weather. I use mine to keep my electronics alive as extremely cold weather will sap the charge from your phone, camera or GPS batteries. No Flame The platinum-catalyzed glass fiber burner offers quick and sure lighting. Produces a radiant heat without the flame. Produces more than 10 times as much heat as most disposable warmers. Economical and constant warmth for up to 24 hours with just 0.4 oz of fuel. Environmentally friendly. Reusable (except for the burner) and virtually pollution free. Low odor Thin profile makes the hand warmer easy to use and carry. Filling jug supplied
One of Mountain Equipment’s lightest softshell gloves. Ideal when some insulation is required but dexterity cannot be sacrificed. Well suited to continental ice-fall climbing and summer alpine routes on mixed terrain. Made from Gore Windstopper Softshell fabric, which is windproof, highly breathable and exceptionally water-resistant. There is Tricot micro-fleece lining for next to skin comfort, moisture wicking and some warmth. Cowhide leather palm improves grip and durability. Neoprene cuff insert for insulation and added comfort with pole or axe leashes. Roll-tip fingers for comfort and durability. Precurved anatomic fingers for improved comfort and fit. Minimal seam design for durability and comfort. Cowhide leather palm and fingers for grip and durability Neoprene cuff for insulation and comfort with pole or axe leashes Roll-tip fingers for comfort and durability Pre-curved fingers and thumb for dexterity Tricot microfleece liner is wickable, quick to dry and warm
The Stone Glove is a 3/4 finger leather glove for dexterity-crucial climbing activities such as belaying, aid climbing and jugging. There is a handy loop in the cuff strap allowing you to quickly clip them to your harness and get them out of the way. The durable goat leather and Kevlar stitching mean they wont be falling apart any time soon. Goat leather Reinforced leather palm and knuckle patches with Kevlar stitching Hook-and-loop cuff closure
The Scree Glove it a lightweight glove suitable for 4-season use during alpine approaches and other aerobic mountain sports. They have a durable goat leather palm with a 4-way stretch soft shell panel across the back of the glove. Close fitting to give great dexterity and the goat skin palm withstands a battering as you scramble over rocks and point sharp things. Highly breathable 4-way stretch soft shell Goat leather palm and fingers for durable and secure grip Neoprene hook-and-loop cuff for secure closure
The Virago Glove is a fully waterproof version of a classic leather work glove. Winter work gloves are known as proper workhorses, being tough and dexterous, but not necessarily warm. However this is where the Virago steps up; not only is it tough and dexterous, it has 142g of PrimaLoft packed into the back of the hand. Now here is the nice bit, it has a zip pocket for you to pop in a packet hand warmer for when it starts to get really cold. The plam, back and rolled finger tips are constructed out of supple yet durable goat leather, where as the gusset and the backs of the fingers have a 4 way stretch Nylon to aid dexterity. Great for a day on the slopes and a bit of back country stuff. Fixed lining with 100% waterproof and breathable GORE-TEX with XCR Product Technology insert Abrasion-resistant, woven nylon shell with 4-way stretch Lining has 142 g PrimaLoft insulation on back of hand and 100g fleece palm Goat leather on palm, back of hand and fingers Zippered pocket for heat packet
This anatomically shaped glove has a close sensitive fit enabling excellent control and use of brakes and gears. There is insulation on the back of the hand to ensure this exposed area of the hand is kept warm on those cold winter rides. Gel padding on strategic areas of the palm alleviates nerve pressure that can lead to numb hands and there are silicone grip pads on the finger tips to make sure you dont slip off the brakes. With extended wrap around close fitting cuffs and a fleece wiper on the thumb you have everything you need to keep your hands warm, dry and protected whilst riding. If it is really cold and nasty you can boost the thermal performance of these gloves by adding a SealSkinz Thermal Liner glove. Totally waterproof, windproof and breathable Anatomic design ?Pre-curved finger form Durable Ripstop water resistant outer shell fabric Spot insulation placement for extra warmth Soft, durable synthetic palm with great grip Gel pressure point padding Silicone contact point mapping increases grip Extended stretch cuffs Reflective piping on back Fleece wiper on thumb Sealskinz Thermal Rating: 4 out of 5
These lightweight and stretchy gloves feature the unique SealSkinz stretchy waterproof and breathable membrane sandwiched between a Merino lining and a seamless outer. These gloves are very close fitting allowing you complete dexterity and the gripper dots on the palm and fingers add further grip, especially in the wet. They are extremely versatile and useful for just about any activity where you need to keep your hands dry and warm. In cold conditions you can boost the thermal performance by adding a SealSkinz Thermal Liner. Totally waterproof, breathable and windproof Close fitting stretch knit Dotted palm and fingers for excellent grip, even when wet Merino wool lined for warmth and moisture control SealSkinz Thermal Rating: 2 out of 5
These warm, practical and comfortable gloves have a stretch fit and an anatomical design to keep that lovely Merino wool in contact with your skin to maximise its performance. These work particularly well with the SealSkinz All Season gloves to boost their performance for colder conditions.
These warm, practical and comfortable gloves have a stretch fit and an anatomical design to keep that lovely Merino wool in contact with your skin to maximise its performance. These work particularly well with the SealSkinz All Season gloves to boost their performance for colder conditions.
This well made and double layer polyester fleece glove is much warmer than it looks. The fleece fabric insulates brilliantly, dries quickly and can be scrunched up to stuff in your pockets The Vital also features a durable Lorica Suede reinforced ball of the hand and thumb to reduce wear from walking poles etc. A great all round walking fleece glove, that thanks to its double layer construction keeps your hands toasty warm, or use them as a super warm layer under a shell waterproof mitten in really nasty conditions. Light and fast-drying Reinforcement on ball of hand and thumb Glove liner
These superb gloves give you an awful lot of bang for your buck, the outers are made from a mixture of leather and softshell to provide protection and comfort. The lining is a soft polyester fleece with low bulk and good insulation. Waterproofing is taken care of by Mammuts own DRYtech membrane, a proven and reliable material with good breathability. Mammut do make very good gloves with a wide size range to accommodate varying hand sizes and a very good anatomical shape. Mammut DRYtech membrane for permanent waterproofness Elastic neoprene insert for additional freedom of movement 3-D thumb construction for more freedom of movement Palm with additional reinforcement Velcro closure on wrist Loop on cuff ensuring an easy entry Soft fabric insert for dripping noses Warm, insulating polyfleece lining Contains non-textile parts of animal origin (leather)
Pertex Endurance outer fabric keeps out the worst of the weather whilst the 850 fill power pure goose down takes care of the warmth. A deep pile fleece inner mitt is completely removable and quick drying and the whole mitt is easily taken on and off thanks to the large opening, essential when working in extreme cold. High abrasion areas are protected by a heavier duty fabric and the mitts feature a wrist drawcord closure and webbing strap across the back of the hand to maximise warmth and keep them securely on. Weight: 350g Features: Pertex Endurance fabric outer 850 fill power European Goose Down Hard wearing nylon in abrasion areas Removable inner pile mitt Wrist leash One handed shockcord wrist closure Pull on tabs on both inner and outer mitts Reflective trim Wide opening
The new Endurance Down Mitt is basically a lightweight Expedition Mitt for when you dont really need full on furnace warmth, but just want to make sure your hands stay warm and protected in freezing conditions. They are good for light work in the polar regions and at altitude but excel in UK and Alpine winter mountaineering situations. As the name suggests, they have a Pertex Endurance outer fabric which is a coated lightweight, tough ripstop nylon offering protection from snow and light rain without adding bulk. Despite the high water resistance of the face fabric these mitts are not totally waterproof. Insulation is provided by Rabs high quality 750FP Eurpoean goose down that meets the European Down and feather Association Codex. This code of conduct determines that the source of the down is a byproduct of a slaughterhouse or harvested during moulting periods and not illegally live-plucked. These functional mitts have abrasion resistant panels on the palm, thumb and finger tips so they will stand up to regular use with poles and ice tools. A wide, drawcord opening allows easy access and there are wrist loops to avoid losing them when performing intricate tasks in just your liner gloves. 50g of 750FP European goose down Pertex Endurance outer fabric Protected abrasion areas in palm and mitt tip Wide opening Internal elasticated wrist Wrist leash with simple loop lock
Made using a mix of Merino and Primaloft yarns to provide excellent warmth to weight ratio and the ability to retain some warmth even when wet. These close fitting stretch gloves make an ideal liner glove to layer up in extreme conditions or they work just as well as an everyday cold weather glove. Weight: 40g Features: Primaloft merino yarn Stands alone or layers under outer glove
The Expert Tour glove is truly versatile and offers all year performance thanks to the removable micro-fleece glove liner. The outer glove is made from tough ripstop 40 denier fabric with a cowhide leather reinforced palm and fingers. The outer glove can be worn on its own, or with the fleece liner for additional warmth. The inner glove is made from a soft polyfleece with a synthetic suede palm and fingers for durability. These practical gloves are lined with a full Gore-Tex membrane for complete waterproofing and feature fingertip construction for added durability. The thumb has full 3D construction for freedom of movement and improved dexterity. The Expert Tour is ideal for all winter mountain activities and, thanks to the removable liner, they can be used throughout the year. We really like Mammut gloves, they have a good size range and fit very well. 3 in 1 double glove GORE-TEX NG membrane guarantees permanently waterproof gloves Fingertip construction throughout, for more abrasion-resistance 3-D thumb construction for more freedom of movement Robust, durable leather Loop on cuff ensuring an easy entry Velcro closure on wrist Outer and inner gloves can be worn separately Inner gloves with warm, soft polyfleece Palm of inner glove with comfortable Suede fabric Contains non-textile parts of animal origin (leather)
These insulated gloves will keep your hands warm and dry in all but the coldest of weather. They are not so thick and heavy that you cannot feel what you are doing so you can easily manage zips, Velcro, dog leads, bike controls etc. etc. The goat skin leather palms offer durability and protection whilst the stretchy fabric on the back of the hand makes them exceptionally comfortable. What makes these gloves so useable is their anatomical design and pre-curved fingers, they just feel great on and the soft stretchy cuff wraps around the wrist giving a comfortable snug closure. Pretty much all the glove youll need for walking and trekking outdoors. Totally waterproof, breathable and windproof Pre-curved box finger construction Soft and supple goatskin leather palms Fingertip grip on index finger Reflective piping on back Extended stretch cuffs with soft Velcro closures to keep the weather out Sealskinz Thermal Rating 4 out of 5
These low bulk and low weight stretchy gloves make a perfect liner glove for layering in cold conditions or can be used on their own. The dotted grip palm enables versatile use with equipment and technology and they can be scrunched up very small to fit in your pocket or pack.
The fabric used is Lowe Alpine’s stretch Aleutian fleece with a Ceramic face for added durability. The palm and fingers are faced with a silicone grip print, to make them grippy! The Aleutian Stretch Grip gloves are an extremely comfortable, versatile, quick drying and warm making them an essential bit of kit on the hill and on the street. Aleutian stretch Ceramic fleece fabric Close fitting stretch fit Warm and highly breathable Quick drying Box finger construction for improved dexterity Seamless palm and back Double cuff Ceramic faced fleece for durability Silicone grip palm
The mens Couloir Glove from Mountain Equipment. Gore-Tex lined so they are fully waterproof, windproof yet breathable. The palms, fingers, thumbs and outer wrists are constructed out of cowhide for grip and durability whilst climbing and mountaineering. The fingers are pre-curved and the thumb is made from a 3-part build method to aid dexterity, while the back of the hands have been been fitted with a stretch panel to help lessen the restriction of movement, that you might get with other gloves. They have fitted the back of the thumbs with a nose friendly patch, reducing the chance of getting a sore nose from constant wiping of your runny nose. If youre thinking, Yeah, all this is great, but how warm are they? Baring in mind I have already said they are Gore-Tex lined making them waterproof and windproof, they are also fleece and fiber pile lined for warmth and easy donning, and like any descent mountaineering glove they have a one-handed drawcord closure so there is less faff. GORE-TEX lining is waterproof, windproof and highly breathable Cowhide leather palm and fingers for grip and durability Stretch panel over back of hand for improved dexterity Pre-curved fingers and 3-part thumb for dexterity Roll-tip fingers for added durability Fleece and fiber pile lined Single-handed drawcord closure
This versatile pair of lightweight gloves us Rab’s Meco fabric which is a clever blend of pure ultra- fine merino wool and recycled polyester to give a comfortable and high performance fabric that wicks brilliantly, dries quickly and resists odours. The 165 refers to the fabric weight of 165 g/m². Use these gloves as a liner to add insulation or as a lightweight everyday glove. Rab Meco fabrics combine 65% ethically sourced Australian merino wool with 35% recycled polyester with Activated Carbon Technology. The Activated Carbon bit is made using natural technology and will not wear off or wash out as it is contained inside the fibres. It is extremely breathable and accelerates evaporation by increasing the surface area by 800%. The activated carbon element absorbs odour molecules which are then released and the technology is refreshed by the warmth from washing and drying. As well as all that it provides a natural UVA and UVB barrier, shielding the skin from harmful UV radiation. The two yarns are intimately blended to produce a high performance fabric that offers all the natural benefits of warmth, softness and odour protection of merino wool, but with the added performance of synthetic and activated carbon technologies. This produces a garment that dries 5 times faster and offers increased odour protection over 100% merino fabrics. Lightweight Merino and recycled polyester fabric Activated Carbon Technology
The Guide glove is a tough work horse designed for anyone who spends a lot of time outdoors and needs a beast of a glove that won’t let them down. It features an eVENT waterproof and very tough outer with a warm fleecy interior. The outer glove is constructed from Rab’s own Matrix DWS durable nylon stretchy softshell fabric and reinforced on the palm and fingers with Pittards Amortan leather. Amortan leather is made super durable by encasing the natural fibres in microscopic ceramic armour plates thus preventing wear from surface contact and materials. These technological fabrics are backed up by the reliable and durable eVENT waterproof and breathable membrane. The Guide glove is lined with high pile fleece on the back of the hand and lightweight Bemberg fleece elsewhere to provide the best combination of warmth and dexterity. The Guide features pre-curved box cut finger construction to make handling ropes and tools much easier. Matrix DWS outer fabric eVent waterproof and breathable membrane Pittards Armortan palm Leather reinforcement on cuff, back of hand and over critical seams High pile lining on back of hand Bemberg palm lining printed with Rab logo design Box finger pre-curved construction Back of thumb flocking patch Detachable wrist leashes
The M.E. Super Alpine. Close-fitting and dexterous enough for ice-climbing and alpinism, these softshell gloves are amde from Pontetorto Softshell fabric meaning they are highly breathable and virtually waterproof, with Pittards Oiltac leather palms for durability and grip. The microfleece lining wicks well and is quick to dry. Pontetorto Softshell fabric Pittards Oiltac leather palm offers exceptional grip when wet or dry. Tricot microfleece liner is wickable, quick to dry and warm Pre-curved fingers and thumb for dexterity Extended low profile cuff with Velcro cuff adjuster
The Touch Screen Grip Glove uses Polartec Powerstretch to give a dexterous glove which still provides good warmth. The box finger construction allows for maximum dexterity and with a touch screen compatible index finger and thumb its perfect when you need to use a smart phone or tablet without taking the glove off. The Touch Screen Grip glove also has an extended double layer cuff so theres no gap between the glove and your sleeve, plus it also has a silicone palm to give a good grip on poles or axes. A great glove for general winter use alone or as a thick liner in cooler weather. Polartec Powerstretch Touch Screen compatible index finger and thumb Extended double layered cuff Box finger construction Silicone print palm
They feature a brand new design of waterproof lining that is size specific to each pair of gloves and is attached in such a way as to eliminate bunching and inverting when wearing and removing the gloves. This new liner makes the Nordic glove extremely comfortable to wear and offers improved dexterity. With a thermal rating of 3 out of 5 they are great for high paced mountain activities or just dog walking in cooler conditions. The soft and durable palm material further improves dexterity and offers grip whilst the reinforced knuckles and thumb crutch help to combat abrasion. For extremely cold conditions you can boost the Nordic Glove performance by adding a SealSkinz thermal liner glove. Anatomic design and pre-curved finger form Close fitting and lightweight Totally waterproof, windproof and breathable with membrane integrity Soft, durable palm balances flexibility with grip Reinforced knuckles and thumb crutch Silicone contact point mapping for increased grip Reflective piping on the back Sealskinz Thermal Rating: 3 out of 5
The Rab Alliance Mitt is a very warm, very durable and very versatile modular mitten system. It features a Primaloft insulated eVENT waterproof and very tough outer and a Primaloft insulated inner that can be used independently or together depending on the conditions. The outer Mitt is constructed from Rab’s own Matrix DWS durable nylon stretchy softshell fabric, is fully insulated with 133g/m² Primaloft insulation and is reinforced with Pittards Amortan leather. Amortan leather is made super durable by encasing the natural fibres in microscopic ceramic armour plates thus preventing wear from surface contact and materials. As well as the Amortan treatment this quality leather also features Innovative Grip Technology; this is a polymer infused into the surface of the leather to increase grip without compromising dexterity. these technological fabrics are backed up by the reliable and durable eVENT waterproof and breathable membrane. The outer provides protection and insulation and features a Bemberg brushed lining for comfort and moisture wicking. The inner glove is fully insulated with 133g/²m Primaloft synthetic insulation and covered with Pertex Microlight fabric to provide wind-proofing and water resistance. Thanks to the fantastic performance of the inners they can be used on their own if the conditions are not extreme. Should the inners get wet they will continue to provide some warmth and will dry very quickly. Combine these two and you have a full on winter mountaineering system capable of dealing with pretty much anything the UK or the Alps can throw at you. Outer Mitt Matrix DWS outer fabric eVENT waterproof insert 133g/m² Primaloft insulation Bemberg lining Wrap around Pittards Amortan leather palm Innovative Grip Technology on palm Reflective print Drawcord closure Inner Glove Pertex Microlight fabric 133g/m² Primaloft insulation Bemberg lining Hang loop
After 90 uses it is recommended that you replace the burner head on your Whitby Hand Warmer. Its hard to keep count of how many times you will use your hand warmer but when you notice that its not performing as it used to then its probably time you bought one of these. Also compatible with the Zippo Hand Warmer.
This stretch knit glove is just one of those bits of kit that everyone needs. They can be used as an effective liner to boost the performance of other gloves, or they can be used as a lightweight everyday glove. The Dupont Thermolite fabric offers fantastic warmth for its light weight, wicks moisture and dries very quickly.
The warmest glove available for Black Diamond, the Guide Glove is trusted by professional athletes all over the world. The Gore-Tex XCR inserts keep you dry and the PrimaLoft and boiled wool liner glove keeps you warm. The plam, back and rolled finger tips are constructed out of supple yet durable goat leather, where as the gusset and the backs of the fingers have a 4 way stretch Nylon to aid dexterity. The removable inner liner is packed with 142g of PrimaLoft One for its great warmth to weight ratio. Inside this liner it has been backed with boiled wool and the palm has a low bulk 100g fleece panel for extra warmth and comfort. Finally for a bit of extra protection you have EVA moulded knuckle pads for a bit of impact cushioning. Great for expeditions and all snow sports where you have something strapped to your feet. 100% waterproof and breathable GORE-TEX with XCR Product Technology insert stays with removable liner Abrasion-resistant, woven nylon shell with 4-way stretch Removable liner features 142 g PrimaLoft One and boiled wool 100 g fleece palm lining Goat leather palm and palm patch Molded EVA foam padding on knuckles for impact protection
The Phantom Grip Glove A great pair of gloves if you are walking the dog, hill walking, scrambling or to use as a super grippy liner for winter ice climbing. These versatile gloves are constructed from Polartec Windpro fleece with Hardface technology. Basically it’s a soft stretchy microfleece material with a smooth close knit outer surface which offers improved wind and water resistance. Hardface technology is a surface fusion polymer coating that dramatically improves abrasion, weather resistance and repels dirt. The end result of all this technology is a comfortable, warm, hard wearing, and weather resistant multi-purpose pair of gloves. Weight: 60g Features: Polartec Windpro Stretch fleece fabric with Hardface technology Super grippy silicon palm print Seamless cuff for comfort with Lycra edging
The Zippo Hand Warmer is great for any winter activity. Its sleek and compact design allows it to fit easily into any pocket, and in some cases you can slide it into your gloves. The Hand Warmer uses Zippo lighter fluid to produce more than 10 times the heat as chemical or fuel rod alternative. Zippo say the the hand warmer lasts up to 12 hours on one 0.4oz fill, personally I have had mine burning for nearly 24 hours. The hand warmer contains wadding that absorbs the lighter fuel so it wont leak out onto you clothes or pocket contents. After filling, replace the burning unit wait a few moments before igniting with a lighter. Dont worry you wont be putting a lit flame into your pocket, the burning unit is platinum-catalyzed glass fiber; this will glow red as it burns the fumes that seep out of the main body of the hand warmer. The burning unit will need replacing from time to time but as far as hand warmers go this one is easy to use and last ages! Great for use on the mountains or any outdoor activity in really cold weather. I use mine to keep my electronics alive as extremely cold weather will sap the charge from your phone, camera or GPS batteries. No Flame The platinum-catalyzed glass fiber burner offers quick and sure lighting. Produces a radiant heat without the flame. Produces more than 10 times as much heat as most disposable warmers. Economical and constant warmth for up to 24 hours with just 0.4 oz of fuel. Environmentally friendly. Reusable (except for the burner) and virtually pollution free. Low odor Thin profile makes the hand warmer easy to use and carry. Filling jug supplied
These versatile mitts use Lowe Alpine’s Triplepoint fabric to make them totally waterproof and breathable. The tough and durable nylon ripstop outer shell and Granite Grip palm reinforcement ensures they will stand up to the rigours of winter mountain walking, such as using a walking axe or trekking poles. We are big fans of this type of shell mitten; they are incredibly versatile and provide essential protection when paired with your choice of liner glove. They can even be used on their own in mild wet conditions. Finished off with practical features such as a wrist drawcord and a nose wipe on the back of the thumb they will provide years of reliable service.
Constructed from Lowe Alpine’s Stormweave stretch Nylon softshell fabric with Pittards Amortan WRX100 leather reinforced palm and fingers. Amortan leather is made super durable by encasing the natural fibres in microscopic ceramic armour plates thus preventing wear from surface contact and materials. These fantastic feeling and dexterous gloves have a light Bemberg brushed lining to enhance moisture management and provide light insulation. Even the cuff is made from an incredibly breathable Airprene perforated fabric with a non-snag Velcro closure making these gloves extremely comfortable to wear. Polartec Powershield back for weather resistance Clarino leather palm with reinforcement patch Roll-top fingertips on index and middle fingers Reflective print for safety Airprene low bulk cuff with non-snag hook and loop closure Flocking nose wipe on back of thumb
The Storm 3-in-1 glove combines a tough waterproof and insulated outer glove with a removable fleece inner. This gives you a very versatile solution for winter walking and trekking. The outer glove uses Lowes reliable Triple Point membrane to provide the waterproofing and breathability combined with a tough mini-ripstop nylon fabric and reinforced palm. Synthetic polyester insulation provides warmth and breathability for cold weather activities and isnt too bulky so you can still manage zips and buckles etc. The thumb has a soft nose wipe and the cuff has a draw cord closure to keep out the elements and keep in the warmth. An Aleutian fleece liner glove can be used on its own for less extreme conditions or it can be used to really boost the performance of the outer glove when the temperature dips below freezing. Durable mini-ripstop nylon outer Waterproof and breathable Triplepoint insert Polyester insulation for warmth Bemberg lining for comfort Partial Granite Grip palm Single-hand drawcord cuff closure Flocking nose wipe on back of thumb Fast-drying removable inner fleece glove
These lightweight and highly efficient gloves can be used on their own in cooler conditions or as a liner to boost the performance in extreme weather. They are made with a blend of Merino wool and synthetic Primaloft fibres. Primaloft is better known as a filling for insulated clothing; these gloves use the same ultra-fine fibres to provide exceptional thermal retention, softness and hydrophobic properties. Basically the gloves are very warm, very lightweight, very comfortable and very quick drying. The Primaloft glove features conductive yarn on the index and middle fingers and thumb so you can use your tech and still keep your hands warm. The stretch fabric is soft and comfortable and allows excellent dexterity. PrimaLoft Silver Performance Yarn Merino Wool Blend Conductive yarn on index, middle and thumb Stands alone or layers under outer gloves Stretch fit
These lightweight gloves can be used as a stand alone outer in cool conditions or as a liner when things get really chilly. They are made from the brilliant Polartec Power Stretch fabric that insulates and manages moisture superbly. The fabric has a smooth outer which helps to repel wind and rain and is abrasion resistant; the soft pile inner fabric actively pulls moisture away from your skin and traps air to keep your warm, dry and comfortable. Conductive finger tips on the index, middle and thumb allow you to use your techy gadgets without getting cold hands. Polartec Power Stretch Pro Stretch fleece conductive finger tips on index, middle and thumb Low bulk Lycra cuff Stands alone or layers under outer gloves
The Guide glove is a tough work horse designed for anyone who spends a lot of time outdoors and needs a beast of a glove that won’t let them down. It features an eVENT waterproof and very tough outer with a warm fleecy interior. The outer glove is constructed from Rab’s own Matrix DWS durable nylon stretchy softshell fabric and reinforced on the palm and fingers with Pittards Amortan leather. Amortan leather is made super durable by encasing the natural fibres in microscopic ceramic armour plates thus preventing wear from surface contact and materials. These technological fabrics are backed up by the reliable and durable eVENT waterproof and breathable membrane. The Guide glove is lined with high pile fleece on the back of the hand and lightweight Bemberg fleece elsewhere to provide the best combination of warmth and dexterity. The Guide features pre-curved box cut finger construction to make handling ropes and tools much easier. Matrix DWS outer fabric eVent waterproof and breathable membrane Pittards Armortan palm Leather reinforcement on cuff, back of hand and over critical seams High pile lining on back of hand Bemberg palm lining printed with Rab logo design Box finger pre-curved construction Back of thumb flocking patch Detachable wrist leashes
The Touch Screen Grip Glove uses Polartec Powerstretch to give a dexterous glove which still provides good warmth. The box finger construction allows for maximum dexterity and with a touch screen compatible index finger and thumb its perfect when you need to use a smart phone or tablet without taking the glove off. The Touch Screen Grip glove also has an extended double layer cuff so theres no gap between the glove and your sleeve, plus it also has a silicone palm to give a good grip on poles or axes. A great glove for general winter use alone or as a thick liner in cooler weather. Polartec Powerstretch Touch Screen compatible index finger and thumb Extended double layered cuff Box finger construction Silicone print palm
The Guide Glove From Mountain Equipment is one of their hardest working all round gloves. Made from the super durable Drilite Extreme fabric that is 100% waterproof with a stretch panel inserted on the back of the hand for greater movement and dexterity, this glove is suitable for almost any mountain sports, be it walking, scrambling even winter mountaineering. The fleece lined inner will keep your hand nice and warm while it wicks away any moisture from your hands, moving it to the outer fabric where it will be drawn through the waterproof membrane and out of the glove. The palm and fingers are made from cowhide leather for durability and grip; roll tip finger tips and ergonomically articulated fingers and thumbs provide greater dexterity, while the easy one handed drawcord closer keeps the worst of the weather from entering the glove opening. There is also wrist leashes to keep your gloves safe when you take them off and a lovely soft patch on the back of the thumb for you to wipe your nose drips on. M.E. have pretty much covered everything. A true workhorse. DRILITE Extreme insert is waterproof and breathable Cowhide leather palm and fingers for grip and durability Stretch insert over back of hand for improved dexterity Pre-curved fingers and thumb for dexterity Fleece and fibre pile lining for comfort, warmth and ease of fitting Roll-tip fingers for added durability Soft nose wipe on thumb Wrist leash Single-handed drawcord closure
These brilliant gloves use Lowe Alpine’s Triplepoint insert to make them totally waterproof and breathable. The tough and durable nylon ripstop outer shell and Granite Grip palm reinforcement ensures they will stand up to the rigours of winter mountain walking, such as using a walking axe or trekking poles. The Storm Gloves are insulated with a synthetic polyester fibre and then lined with a soft Bemebrg (brushed velour) fabric to maximise wicking and comfort. These versatile and practical gloves are finished off with practical features such as a wrist drawcord and a nose wipe on the back of the thumb they will provide years of reliable service. Durable mini-ripstop nylon outer Waterproof and breathable Triplepoint insert Polyester insulation for warmth Bemberg lining for comfort Partial Granite Grip palm Single-hand drawcord cuff closure Flocking nose wipe on back of thumb
The Silkwarm glove is made of silk and keeps your hands warm! Made from 100% silk for smooth friction free layering and moisture control they will add valuable warmth as part of a layering system or on their own. Weighing next to nothing and packing up super small you can afford to keep this in your pack/pocket at all times. Smooth face reduces friction between layers Low bulk to aid layering and packing Elasticated ribbed cuffs for snug wrist fit Box-finger construction for improved fit Seamless palm and back for comfort
The Control IT gloves work with virtually all touch screens so you can text, email, tweet, post or whatever you do and still keep your gloves on. To ensure you don’t drop your device the gloves also feature a grippy palm. These lightweight gloves work equally well as a liner as they have a low bulk and seamless construction. Conductive yarn on 3 finger tips Stretch fit Grippy palm Low bulk for layering Elasticated ribbed cuffs One piece seamless construction
These brilliant mitts use Lowe Alpine’s Triplepoint insert to make them totally waterproof and breathable. The tough and durable nylon ripstop outer shell and Granite Grip palm reinforcement ensures they will stand up to the rigours of winter mountain walking, such as using a walking axe or trekking poles. If you suffer from cold hands mitts are always a warmer choice than gloves due to the reduced overall surface area. These ones even feature internal finger pockets for improved fit and comfort. Finished off with practical features such as a wrist drawcord and a nose wipe on the back of the thumb they will provide years of reliable service.
These lightweight versatile gloves are made from close fitting Polartec Powerstretch Pro with a durable nylon face fabric that is lightweight yet warm, has low water absorbency and if soaked dries very quickly. These everyday gloves provide warmth, low bulk and should be on everyones kit list. Weight: 43g Features: Polartec Powerstretch Pro Low bulk cuff, with Lycra edging