This premium quality & superbly designed expedition jacket is packed with 850 fill power premium goose & duck down that has been made highly water repellant by  Down-Tek  Nanotechnology. This cationic treatment creates surface tension on the down cluster. When molecules of moisture encounter  Down-Tek, the moisture is forced to collect into a sphere & roll off the down cluster rather than adhering to & soaking into it. This treatment adds no discernable weight, is environmentally friendly & dramatically improves the wet performance of down.  Down-Tek absorbs 30% less water, dries 60% faster & retains significantly more loft when exposed to moisture. All this magic down is cocooned in a 30 Denier windproof, rip-stop nylon main body outer with DWR finish resulting in a highly weather resistant jacket. Box wall construction is used on the main body to maximise loft & insulation, whilst the arms have a stitch through construction to minimise weight.  Jottnar have applied their fastidious detailing to this jacket & used Neutron 120 synthetic filling on the cuffs, hem & collar, these are areas most likely to wet out. The fully insulated & adjustable helmet compatible hood has a stiffened & wired peak & a nice high collar with soft  Rentex  (synthetic micro-suede) beard guard to protect your face. A 2 way YKK front zip is used to allow harness access & it has a large synthetic filled internal baffle to reduce cold spots.  Rentex is also used to line the inner cuffs which are elasticated with Velcro adjustment. There are two zipped hand pockets with protective front facing insulation & one zipped internal pocket capable of swallowing a 1 litre bottle. You even get a choice of zip puller cords, lightweight, or glove compatible. DOWN-TEK water repellent down insulation 850 fill power, 93/7 premium goose/duck down ratio Body-mapped down fill schedule Box wall torso construction for warmth Stitch through arm construction for light weight Neutron 120 insulation in wet-out zones at cuffs, hem & collar 30 Denier windproof, rip-stop nylon main body outer with DWR finish Helmet compatible insulated hood with internal pulls Wire stiffened hood brim with fully mouldable peak 1-litre bottle compatible, zipped inner pocket YKK two-way front zipper Athletic, streamlined, articulated cut Internal oversized storm baffle with Neutron 120 synthetic insulation Hand warmer pockets with front facing insulation Adjustable,  elasticated cuffs with Velcro adjusters and  Rentex cuff liners Rentex beard guard Internally protected hood pull cords Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo ...

This premium quality & superbly designed expedition jacket is packed with 850 fill power premium goose & duck down that has been made highly water repellant by  Down Tek  Nanotechnology. This cationic treatment creates surface tension on the down cluster. When molecules of moisture encounter  Down-Tek, the moisture is forced to collect into a sphere & roll off the down cluster rather than adhering to & soaking into it. This treatment adds no discernable weight, is environmentally friendly & dramatically improves the wet performance of down.  Down-Tek absorbs 30% less water, dries 60% faster & retains significantly more loft when exposed to moisture. All this magic down is cocooned in a 30 Denier windproof, rip-stop nylon main body outer with DWR finish resulting in a highly weather resistant jacket. Box wall construction is used on the main body to maximise loft & insulation, whilst the arms have a stitch through construction to minimise weight.  Jottnar have applied their fastidious detailing to this jacket & used Neutron 120 synthetic filling on the cuffs, hem & collar, these are areas most likely to wet out. The fully insulated & adjustable helmet compatible hood has a stiffened & wired peak & a nice high collar with soft  Rentex  (synthetic micro-suede) beard guard to protect your face. A 2 way YKK front zip is used to allow harness access & it has a large synthetic filled internal baffle to reduce cold spots.  Rentex is also used to line the inner cuffs which are elasticated with Velcro adjustment. There are two zipped hand pockets with protective front facing insulation & one zipped internal pocket capable of swallowing a 1 litre bottle. You even get a choice of zip puller cords, lightweight, or glove compatible. DOWN-TEK water repellent down insulation 850 fill power, 93/7 premium goose/duck down ratio Body-mapped down fill schedule Box wall torso construction for warmth Stitch through arm construction for light weight Neutron 120 insulation in wet-out zones at cuffs, hem & collar 30 Denier windproof, rip-stop nylon main body outer with DWR finish Helmet compatible insulated hood with internal pulls Wire stiffened hood brim with fully mouldable peak 1-litre bottle compatible, zipped inner pocket YKK two-way front zipper Athletic, streamlined, articulated cut Internal oversized storm baffle with Neutron 120 synthetic insulation Hand warmer pockets with front facing insulation Adjustable,  elasticated cuffs with Velcro adjusters and  Rentex cuff liners Rentex beard guard Internally protected hood pull cords Corded, glove compatible zipper pulls One-handed, elastic hem drawcord operation Embroidered logo ...

The  Vanir  Salopette has been designed for technical mountain use & gives you all the features you need to remain comfortable & protected in the most severe conditions. These are the sort of salopettes that you put on at the start of the day & only take off when you are safely off the mountain.  Polartec  Neo Shell fabric provides waterproof & highly breathable performance with added stretch to make them extremely comfortable to wear for extended periods. The face fabric is a densely woven flat finish high grade nylon that gives the  Vanir superb durability. The high front bib features vertical twin chest pockets & fully adjustable & removable braces with electro plated steel buckles for strength & corrosion resistance. The back of the bib is cut lower & made from mesh fabric for increased breathability, especially when carrying a pack. An integral waist belt helps to cinch in any excess fabric & improves insulation when its really nasty outside.  The  Vanir has an athletic fit, they are narrower in the legs, to avoid excess fabric and maximise performance. Diamond crotch patterning & articulated knees improve mobility & the knees are reinforced to protect this vulnerable area.  Jottnar have decided to avoid full length zips as they can form a bulky uncomfortable area at the waist, especially when wearing a harness. The YKK  Aquaguard ¾ zips used have two way zippers to provide ventilation. The internal snow gaiter is fully removable if you want to use the  Vanir for less extreme duties, & is fitted with elastic grippers & a lace hook.   An external Kevlar reinforced instep reduces crampon damage & wear.  A thoroughly brilliant pair of mountain salopettes, well designed & uncompromising in quality & function. There are a couple of updateds for the 2014/15 winter season.  Jottnar have thrown in a larger pair of detachable internal gaiters for ski boots & other higher volume footwear, as well as adding a second hip pocket where there only used to be one; giving the Vanir greater versatility & storage. Waterproof, breathable, stretch, 3 layer  Polartec  Neoshell in legs, seat & front bib. 136 g/m 2 Hydrostatic head 10, 000 mm Breathable, stretch-woven back panel Kevlar reinforced instep protectors 2 pairs of detachable internal gaiters of different sizes with elasticated gripper cuff & boot clasp Reinforced knees & seat Diamond crotch for strength & durability Vertically aligned chest pockets YKK  Aquaguard water repellent two-way front zipper with external storm flap YKK  Aquaguard ¾ length two-way leg zippers Corded, glove compatible zipper pulls Elasticated, adjustable, detachable braces with electroplated metal o-rings Athletic, streamlined, articulated cut Embroidered logo ...

The Vanir Salopette has been designed for technical mountain use & gives you all the features you need to remain comfortable & protected in the most severe conditions. These are the sort of salopettes that you put on at the start of the day & only take off when you are safely off the mountain. Polartec Neo Shell fabric provides waterproof & highly breathable performance with added stretch to make them extremely comfortable to wear for extended periods. The face fabric is a densely woven flat finish high grade nylon that gives the Vanir superb durability. The high front bib features vertical twin chest pockets & fully adjustable & removable braces with electro plated steel buckles for strength & corrosion resistance. The back of the bib is cut lower & made from mesh fabric for increased breathability, especially when carrying a pack. An integral waist belt helps to cinch in any excess fabric & improves insulation when its really nasty outside.  The Vanir has an athletic fit, they are narrower in the legs, to avoid excess fabric & maximise performance. Diamond crotch patterning & articulated knees improve mobility & the knees are reinforced to protect this vulnerable area. Jottnar have decided to avoid full length zips as they can form a bulky uncomfortable area at the waist, especially when wearing a harness. The YKK Aquaguard ¾ zips used have two way zippers to provide ventilation. The internal snow gaiter is fully removable if you want to use the Vanir for less extreme duties, & is fitted with elastic grippers & a lace hook. An external Kevlar reinforced instep reduces crampon damage & wear.  A thoroughly brilliant pair of mountain salopettes, well designed & uncompromising in quality & function. Waterproof, breathable, stretch, 3 layer Polartec  Neoshell in legs, seat & front bib. 136 g/m 2 Hydrostatic head 10, 000 mm Breathable, stretch-woven back panel Kevlar reinforced instep protectors Detachable internal gaiters with elasticated gripper cuff & boot clasp Reinforced knees & seat Diamond crotch for strength & durability Vertically aligned chest pockets YKK Aquaguard water repellent two-way front zipper with external storm flap YKK Aquaguard ¾ length two-way leg zippers Corded, glove compatible zipper pulls Elasticated, adjustable, detachable braces with electroplated metal o-rings Athletic, streamlined, articulated cut Embroidered logo ...

Julbo  Drus  Nickel  Spectron  Category 4 Lens. A classic mountain style thats been brought up to date with quality lenses that filter out harmful UV rays. A stylish modern shape with a comfortable nose piece. Designed for serious mountain use with removable nose piece & leather side shades for full on protection from harsh mountain sun & wind. The lightweight metal frame with malleable ear hooks allow for a comfortable & fully costomisable fit. Featuring Julbos Spectron 4 polycarbonate lenses which are very strong & light with a visible light transmission rate of 5% they are unsuitable for driving. Classic glacier glasses for high altitude climbing & harsh light situations Removeable full leather side shields for maximum protection at all times Anti-reflective & Anti-fog finish on lens Water-repellent: water slides off the lens easily Oil repellent: reduces finger marks for easier cleaning Free protective case ...

Julbo Sherpa Black Spectron Category 3 Lens. A great value set of mountain glasses with removable side shades. The flexible ...

Julbo Trek Black Spectron 4. A versatile & high performance pair of sunnies designed for multi-activity use. Detachable side shields provide extra protection when required or, once removed, provide additional ventilation. The Category 4 Spectron lenses are vented & there is a foam sweat band across the brow to stop sweat dripping onto the lenses, making the Trek perfect for fast paced activities. 360 degree adjustable temples & grippy arms & nose piece keep the Treks firmly in place during the most intense adventures.   And if that wasnt enough they come with a fully adjustable strap.   The category 4 lens is perfect for bright sunlight conditions,  cutting out 100% of UV light,  however due to the protective nature of this lens they are not suitable for driving. Category 4 lens Multi-activity use Removable side shields Detachable foam brow sweat band 100% UV Protection ...

The Jetboil 1.5 litre cooking pot offers cooking versatility with a wide shape that makes it easy to simmer & cook for small groups. The Flux Ring protects the burner from the wind & hugely increases the surface area of the Cooking Pots base to make sure all the heat is directed there & not wasted up the sides.  Folding wire handles & insulating cozy make for safe & easy handling.   The removable plastic base cover works as a serving plate or bowl.   You will need an additional Pot Support to use this with any Jetboil cooking system. ...

The Jetboil coffee press converts your Jetboil stove into a French press. Why settle for instant coffee when you can sip your favorite brew? The featherweight French style press brings civilization with you, even to the most uncivilized locations.... well worth the 22 g pack weight. The handle detaches from the head so it can be stored inside your Jetboil pot. ...

This larger capacity lightweight & incredibly efficient camping cooking system is perfect for small groups such as Scouts & Dof E or for family picnics. This Jetboil system is the original, & still pretty much the best, completely integrated cook system. Weighing only 400 g, the Jetboil Flash cooking system combines everything you need to heat up your nosh in one compact package.  The trick to Jetboils efficiency is the flux ring technology which drastically reduces boil times, saving fuel & gets nourishment into you quickly. The Flux ring protects the burner from the wind & hugely increases the surface area of the base of the cooking pot to make sure all the heat is directed there & not wasted up the sides.   Boil time for 1/2 a litre of water in good conditions is around 2 minutes & 30 seconds.   Getting the Flash started couldnt be easier thanks to the integrated & reliable push button igniter, so no more worrying about soggy matches or empty lighters.   A unique feature of the Flash is the colour changing signal on the heat resistant neoprene sleeve that changes colour when the contents are hot.   The sleeve also enables you to pick up the whole thing & get stuck in to your food & the lid features a drinking spout. The Flash burner unit & a 100 g gas canister can both be stored inside the pot for easy transportation.

Features: 1.0 Liter Flux Ring cooking cup with insulating cozy, featuring Flash color-change heat indicator  Adjustable stainless steel burner with push-button through-cup igniter  Drink-through lid & insulating bottom cover/measuring cup  Fuel Stabilizer tripod included. Pot support is not included but can be purchased separately

...