This really high quality cable is an ideal replacement or upgrade for your Sky, Virgin or FreeSat digital TV setup. It features two robust, gold plated F-Type connectors with stylish 'gun-metal' hoods for a very secure and reliable installation. The cable itself is manufactured using a 75 Ohm double screened OFC coaxial copper conductor for optimal signal transfer and reduced interference.
2 x LC Fibre Optic Male to 2 x LC Fibre Optic Male
Compatible with all standard fibre optic equipment and connectors
Full duplex 62.5/125m type fibre
Zip twin, LS0H, Multimode cable
Ceramic connectors ensure low signal loss and high reliability
Total immunity to electrical and electromagnetic interference (EMI)
Insertion Loss:
This high performance managed SNMP layer 2 switch provides users with 24 Gigabit Ethernet 10/100/1000Mbit/sec ports and 4 shared Mini GBIC ports. Its management function can be accessed via an in-band IP access from a local or remote location.
This switch is suitable for enterprise companies or SOHO users who want to build up a high speed network or backbone. With single-mode or multi-mode fibre transceivers you can link remote users or share remote resources. A web interface management facility provides control capability over TCP/IP. This makes operation easy to manage with a browser at the local or remote side.
This switch supports both port-based VLANs and 802.1q (tag-based) VLANs. To increase bandwidth application it supports port trunking with up to 8 ports. Non-blocking and maximum wire speed performance is supported on all switched ports. It also supports an auto-negotiation and Auto MDI/MDI-X function on all switched 10/100/1000 RJ-45 Gigabit ports.
Package Contents:
24/4 Port Gigabit SNMP Switch
Rackmount brackets
UK power cable 1.8m
User manual
Parts you will need:
LINDY VGA Face Plate, Part No. 60520
Premium Gold S-VGA cable according to your requirements (the example shows a Male to Male; Male to Female versions are also available)
Pack of Holding Posts & Nuts, Part No. 66025
This high performance network switch is ideal for small home or office networks, or for segmenting larger networks into smaller, connected subnets for improved performance. All of its ports are capable of 10/100Mbps auto-negotiation, providing the easiest, most hassle-free way to integrate older 10Base-T network devices. Store-and-forward architecture is used by the switch to filter and forward data after each packet is received and examined to be free of errors.
The switch supports full and half-duplex operation which doubles the network bandwidth and allows the simultaneous transmission and reception of frames without causing collisions. Diagnostic LEDs on the front panel show the operating status of both the switch and the individual ports.
Package Contents:
24 Port Ethernet Switch
19" Rackmount brackets & rubber feet
UK Mains cable
User manual
Parts you will need:
LINDY VGA Face Plate, Part No 60520
Premium Gold S-VGA cable according to your requirements (the example shows a Male to Male; Male to Female versions are also available)
Pack of Holding Posts & Nuts, Part No. 66025/66026
This neat product allows VGA and audio signals to be transmitted up to 150m over CAT5e or higher cables. It is designed for use with our compatible receiver (Part No. 32764, not included) to provide an easy method of extending the signals. A 3.5mm jack is provided to connect to your PC's audio output whilst a USB connector allows the transmitter to take power from a USB port.
The LINDY CAT5e/6 VGA Extender System
The LINDY VGA Extender System is a range of modular devices for distributing VGA and mono audio signals over a very long distance using CAT5e, or higher, network cable. The range consists of three transmitter units and two receivers which can be mixed and matched according to your requirements. Depending on the required video resolution, transmission distances of up to 250m are possible making the VGA Extender System an ideal choice for digital signage, public display and video distribution installations.
Installation Example
High quality angled terminal block contacts
Accepts 22-26 AWG solid core wire
Dual type terminal blocks (for Krone/110 compatible punchdown tools)
Dual standard labelling (T568A/T568B colour coding standards)
Cable tie mounts and cable ties supplied for cable management
16(1U), 24(1U), 32(2U), 48(2U) and 96(4U) port versions also available
Fixing screws, cage nuts and washers supplied separately(Part No. 66034)
The LINDY CROMO HDMI 90 Degree Right Angle Adapter is a high quality adapter ideal for use with HDTV, home cinema and entertainment centre installations. It provides premium quality construction at an affordable price and features 24K gold plated contacts for optimum conductive ability and resistance to tarnishing and corrosion.